[PATCH v3 14/15] media: i2c: ds90ub953: Add error handling for i2c reads/writes

[Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>]

Add error handling for i2c reads/writes in various places.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
---
 drivers/media/i2c/ds90ub953.c | 46 ++++++++++++++++++++++++++++++-------------
 1 file changed, 32 insertions(+), 14 deletions(-)

diff --git a/drivers/media/i2c/ds90ub953.c b/drivers/media/i2c/ds90ub953.c
index b6451811f906..f8f3e31f0077 100644
--- a/drivers/media/i2c/ds90ub953.c
+++ b/drivers/media/i2c/ds90ub953.c
@@ -401,8 +401,13 @@ static int ub953_gpiochip_probe(struct ub953_data *priv)
 	int ret;
 
 	/* Set all GPIOs to local input mode */
-	ub953_write(priv, UB953_REG_LOCAL_GPIO_DATA, 0);
-	ub953_write(priv, UB953_REG_GPIO_INPUT_CTRL, 0xf);
+	ret = ub953_write(priv, UB953_REG_LOCAL_GPIO_DATA, 0);
+	if (ret)
+		return ret;
+
+	ret = ub953_write(priv, UB953_REG_GPIO_INPUT_CTRL, 0xf);
+	if (ret)
+		return ret;
 
 	gc->label = dev_name(dev);
 	gc->parent = dev;
@@ -970,10 +975,11 @@ static void ub953_calc_clkout_params(struct ub953_data *priv,
 	clkout_data->rate = clkout_rate;
 }
 
-static void ub953_write_clkout_regs(struct ub953_data *priv,
-				    const struct ub953_clkout_data *clkout_data)
+static int ub953_write_clkout_regs(struct ub953_data *priv,
+				   const struct ub953_clkout_data *clkout_data)
 {
 	u8 clkout_ctrl0, clkout_ctrl1;
+	int ret;
 
 	if (priv->hw_data->is_ub971)
 		clkout_ctrl0 = clkout_data->m;
@@ -983,8 +989,15 @@ static void ub953_write_clkout_regs(struct ub953_data *priv,
 
 	clkout_ctrl1 = clkout_data->n;
 
-	ub953_write(priv, UB953_REG_CLKOUT_CTRL0, clkout_ctrl0);
-	ub953_write(priv, UB953_REG_CLKOUT_CTRL1, clkout_ctrl1);
+	ret = ub953_write(priv, UB953_REG_CLKOUT_CTRL0, clkout_ctrl0);
+	if (ret)
+		return ret;
+
+	ret = ub953_write(priv, UB953_REG_CLKOUT_CTRL1, clkout_ctrl1);
+	if (ret)
+		return ret;
+
+	return 0;
 }
 
 static unsigned long ub953_clkout_recalc_rate(struct clk_hw *hw,
@@ -1064,9 +1077,7 @@ static int ub953_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
 	dev_dbg(&priv->client->dev, "%s %lu (requested %lu)\n", __func__,
 		clkout_data.rate, rate);
 
-	ub953_write_clkout_regs(priv, &clkout_data);
-
-	return 0;
+	return ub953_write_clkout_regs(priv, &clkout_data);
 }
 
 static const struct clk_ops ub953_clkout_ops = {
@@ -1091,7 +1102,9 @@ static int ub953_register_clkout(struct ub953_data *priv)
 
 	/* Initialize clkout to 25MHz by default */
 	ub953_calc_clkout_params(priv, UB953_DEFAULT_CLKOUT_RATE, &clkout_data);
-	ub953_write_clkout_regs(priv, &clkout_data);
+	ret = ub953_write_clkout_regs(priv, &clkout_data);
+	if (ret)
+		return ret;
 
 	priv->clkout_clk_hw.init = &init;
 
@@ -1238,10 +1251,15 @@ static int ub953_hw_init(struct ub953_data *priv)
 	if (ret)
 		return dev_err_probe(dev, ret, "i2c init failed\n");
 
-	ub953_write(priv, UB953_REG_GENERAL_CFG,
-		    (priv->non_continous_clk ? 0 : UB953_REG_GENERAL_CFG_CONT_CLK) |
-		    ((priv->num_data_lanes - 1) << UB953_REG_GENERAL_CFG_CSI_LANE_SEL_SHIFT) |
-		    UB953_REG_GENERAL_CFG_CRC_TX_GEN_ENABLE);
+	v = 0;
+	v |= priv->non_continous_clk ? 0 : UB953_REG_GENERAL_CFG_CONT_CLK;
+	v |= (priv->num_data_lanes - 1) <<
+		UB953_REG_GENERAL_CFG_CSI_LANE_SEL_SHIFT;
+	v |= UB953_REG_GENERAL_CFG_CRC_TX_GEN_ENABLE;
+
+	ret = ub953_write(priv, UB953_REG_GENERAL_CFG, v);
+	if (ret)
+		return ret;
 
 	return 0;
 }

-- 
2.43.0