Clear the CRC error counter after showing it in ub953_log_status() to make its behavior match the other counter values. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx> --- drivers/media/i2c/ds90ub953.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/media/i2c/ds90ub953.c b/drivers/media/i2c/ds90ub953.c index 10daecf6f457..b6451811f906 100644 --- a/drivers/media/i2c/ds90ub953.c +++ b/drivers/media/i2c/ds90ub953.c @@ -66,6 +66,9 @@ #define UB953_REG_GPIO_INPUT_CTRL_OUT_EN(n) BIT(4 + (n)) #define UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(n) BIT(0 + (n)) +#define UB953_REG_BC_CTRL 0x49 +#define UB953_REG_BC_CTRL_CRC_ERR_CLR BIT(3) + #define UB953_REG_REV_MASK_ID 0x50 #define UB953_REG_GENERAL_STATUS 0x52 @@ -619,6 +622,12 @@ static int ub953_log_status(struct v4l2_subdev *sd) ub953_read(priv, UB953_REG_CRC_ERR_CNT2, &v2); dev_info(dev, "CRC error count %u\n", v1 | (v2 << 8)); + /* Clear CRC error counter */ + if (v1 || v2) + regmap_update_bits(priv->regmap, UB953_REG_BC_CTRL, + UB953_REG_BC_CTRL_CRC_ERR_CLR, + UB953_REG_BC_CTRL_CRC_ERR_CLR); + ub953_read(priv, UB953_REG_CSI_ERR_CNT, &v); dev_info(dev, "CSI error count %u\n", v); -- 2.43.0
