The ov2740 sensor has both reset and power_down inputs according to
the datasheet one or the other should always be tied to DOVDD but on
some designs both are attached to GPIOs.
Add support for controlling both a reset and a powerdown GPIO.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/media/i2c/ov2740.c | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/media/i2c/ov2740.c b/drivers/media/i2c/ov2740.c
index 998e1977978d..14d0a0588cc2 100644
--- a/drivers/media/i2c/ov2740.c
+++ b/drivers/media/i2c/ov2740.c
@@ -525,6 +525,7 @@ struct ov2740 {
/* GPIOs, clocks */
struct gpio_desc *reset_gpio;
+ struct gpio_desc *powerdown_gpio;
struct clk *clk;
/* Current mode */
@@ -1306,6 +1307,7 @@ static int ov2740_suspend(struct device *dev)
struct ov2740 *ov2740 = to_ov2740(sd);
gpiod_set_value_cansleep(ov2740->reset_gpio, 1);
+ gpiod_set_value_cansleep(ov2740->powerdown_gpio, 1);
clk_disable_unprepare(ov2740->clk);
return 0;
}
@@ -1320,6 +1322,7 @@ static int ov2740_resume(struct device *dev)
if (ret)
return ret;
+ gpiod_set_value_cansleep(ov2740->powerdown_gpio, 0);
gpiod_set_value_cansleep(ov2740->reset_gpio, 0);
msleep(20);
@@ -1348,9 +1351,17 @@ static int ov2740_probe(struct i2c_client *client)
if (IS_ERR(ov2740->reset_gpio)) {
return dev_err_probe(dev, PTR_ERR(ov2740->reset_gpio),
"failed to get reset GPIO\n");
- } else if (ov2740->reset_gpio) {
+ }
+
+ ov2740->powerdown_gpio = devm_gpiod_get_optional(dev, "powerdown", GPIOD_OUT_HIGH);
+ if (IS_ERR(ov2740->powerdown_gpio)) {
+ return dev_err_probe(dev, PTR_ERR(ov2740->powerdown_gpio),
+ "failed to get powerdown GPIO\n");
+ }
+
+ if (ov2740->reset_gpio || ov2740->powerdown_gpio) {
/*
- * Ensure reset is asserted for at least 20 ms before
+ * Ensure reset/powerdown is asserted for at least 20 ms before
* ov2740_resume() deasserts it.
*/
msleep(20);
--
2.47.0
