On Tue, Nov 26, 2024 at 05:50:58PM +0200, Mirela Rabulea wrote:
> Add a v4l2 subdevice driver for the Omnivision OX05B1S RGB-IR sensor.
>
> The Omnivision OX05B1S is a 1/2.5-Inch CMOS image sensor with an
> active array size of 2592 x 1944.
>
> The following features are supported for OX05B1S:
> - Manual exposure an gain control support
> - vblank/hblank control support
> - Supported resolution: 2592 x 1944 @ 30fps (SGRBG10)
>
> Signed-off-by: Mirela Rabulea <mirela.rabulea@xxxxxxx>
> ---
>
> Changes in v2:
> Use dev_err_probe for missing clock, since it is now required property, and use NULL for devm_clk_get (no name for single clock), remove check for non NULL sensor->sensor_clk
> Remove dev_err message for devm_regmap_init_i2c allocation error
> Added spaces inside brackets, wrap lines to 80
> Remove some redundant initializations
> Add regulators
> Make "sizes" a pointer
> Use struct v4l2_area instead of u32[2] array
> Remove the count for supported_modes[] and supported_codes[], instead use sentinel element at the end
> Consequently, update ox05b1s_enum_mbus_code, ox05b1s_enum_frame_size, ox05b1s_nearest_size, ox05b1s_find_code, to not use the count
> Remove .h files for modes, however did not move this code in the driver file but added a separate c file for all supported modes
> Refactor register lists to allow multiple register arrays per mode
> Use GPL-2.0-only instead of GPL-2.0
>
> drivers/media/i2c/Kconfig | 1 +
> drivers/media/i2c/Makefile | 1 +
> drivers/media/i2c/ox05b1s/Kconfig | 10 +
> drivers/media/i2c/ox05b1s/Makefile | 2 +
> drivers/media/i2c/ox05b1s/ox05b1s.h | 22 +
> drivers/media/i2c/ox05b1s/ox05b1s_mipi.c | 1001 ++++++++++++++++++
> drivers/media/i2c/ox05b1s/ox05b1s_modes.c | 1171 +++++++++++++++++++++
> 7 files changed, 2208 insertions(+)
> create mode 100644 drivers/media/i2c/ox05b1s/Kconfig
> create mode 100644 drivers/media/i2c/ox05b1s/Makefile
> create mode 100644 drivers/media/i2c/ox05b1s/ox05b1s.h
> create mode 100644 drivers/media/i2c/ox05b1s/ox05b1s_mipi.c
> create mode 100644 drivers/media/i2c/ox05b1s/ox05b1s_modes.c
>
> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> index 8ba096b8ebca..5cda062c0463 100644
> --- a/drivers/media/i2c/Kconfig
> +++ b/drivers/media/i2c/Kconfig
> @@ -700,6 +700,7 @@ config VIDEO_VGXY61
>
> source "drivers/media/i2c/ccs/Kconfig"
> source "drivers/media/i2c/et8ek8/Kconfig"
> +source "drivers/media/i2c/ox05b1s/Kconfig"
>
> endif
>
> diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> index fbb988bd067a..028eb08e648c 100644
> --- a/drivers/media/i2c/Makefile
> +++ b/drivers/media/i2c/Makefile
> @@ -114,6 +114,7 @@ obj-$(CONFIG_VIDEO_OV9282) += ov9282.o
> obj-$(CONFIG_VIDEO_OV9640) += ov9640.o
> obj-$(CONFIG_VIDEO_OV9650) += ov9650.o
> obj-$(CONFIG_VIDEO_OV9734) += ov9734.o
> +obj-$(CONFIG_VIDEO_OX05B1S) += ox05b1s/
> obj-$(CONFIG_VIDEO_RDACM20) += rdacm20.o
> obj-$(CONFIG_VIDEO_RDACM21) += rdacm21.o
> obj-$(CONFIG_VIDEO_RJ54N1) += rj54n1cb0c.o
> diff --git a/drivers/media/i2c/ox05b1s/Kconfig b/drivers/media/i2c/ox05b1s/Kconfig
> new file mode 100644
> index 000000000000..48fcd04b20d5
> --- /dev/null
> +++ b/drivers/media/i2c/ox05b1s/Kconfig
> @@ -0,0 +1,10 @@
> +config VIDEO_OX05B1S
> + tristate "OmniVision raw sensor support OX05B1S"
> + depends on OF
> + depends on GPIOLIB
> + select REGMAP_I2C
> + help
> + This is a Video4Linux2 sensor driver for the Omnivision OX05B1S RGB-IR sensor.
> + This is a 1/2.5-Inch CMOS image sensor with an active array size of 2592 x 1944.
> + It is programmable through I2C interface.
> + The output is on MIPI CSI-2 interface.
> diff --git a/drivers/media/i2c/ox05b1s/Makefile b/drivers/media/i2c/ox05b1s/Makefile
> new file mode 100644
> index 000000000000..0b38dbf98bcd
> --- /dev/null
> +++ b/drivers/media/i2c/ox05b1s/Makefile
> @@ -0,0 +1,2 @@
> +ox05b1s-objs := ox05b1s_modes.o ox05b1s_mipi.o
> +obj-$(CONFIG_VIDEO_OX05B1S) += ox05b1s.o
> diff --git a/drivers/media/i2c/ox05b1s/ox05b1s.h b/drivers/media/i2c/ox05b1s/ox05b1s.h
> new file mode 100644
> index 000000000000..a893c65894f3
> --- /dev/null
> +++ b/drivers/media/i2c/ox05b1s/ox05b1s.h
> @@ -0,0 +1,22 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (C) 2024, NXP
> + */
> +
> +#ifndef OX05B1S_H
> +#define OX05B1S_H
> +
> +#include <linux/types.h>
> +
> +struct ox05b1s_reg {
> + u32 addr;
> + u32 data;
> +};
> +
> +struct ox05b1s_reglist {
> + struct ox05b1s_reg *regs;
> +};
> +
> +extern struct ox05b1s_reglist ox05b1s_reglist_2592x1944[];
> +
> +#endif /* OX05B1S_H */
> diff --git a/drivers/media/i2c/ox05b1s/ox05b1s_mipi.c b/drivers/media/i2c/ox05b1s/ox05b1s_mipi.c
> new file mode 100644
> index 000000000000..0f5e2a946e4f
> --- /dev/null
> +++ b/drivers/media/i2c/ox05b1s/ox05b1s_mipi.c
> @@ -0,0 +1,1001 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * A V4L2 driver for Omnivision OX05B1S RGB-IR camera.
> + * Copyright (C) 2024, NXP
> + *
> + * Inspired from Sony imx219, imx290, imx214 and imx334 camera drivers
> + *
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
> +#include <media/mipi-csi2.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-device.h>
> +#include <media/v4l2-fwnode.h>
> +
> +#include "ox05b1s.h"
> +
> +#define OX05B1S_SENS_PAD_SOURCE 0
> +#define OX05B1S_SENS_PADS_NUM 1
> +
> +#define OX05B1S_REG_SW_STB 0x0100
> +#define OX05B1S_REG_SW_RST 0x0103
> +#define OX05B1S_REG_CHIP_ID_23_16 0x300a
> +#define OX05B1S_REG_CHIP_ID_15_8 0x300b
> +#define OX05B1S_REG_CHIP_ID_7_0 0x300c
> +#define OX05B1S_REG_TIMING_HTS_H 0x380c
> +#define OX05B1S_REG_TIMING_HTS_L 0x380d
> +#define OX05B1S_REG_TIMING_VTS_H 0x380e
> +#define OX05B1S_REG_TIMING_VTS_L 0x380f
> +#define OX05B1S_REG_EXPOSURE_H 0x3501
> +#define OX05B1S_REG_EXPOSURE_L 0x3502
> +#define OX05B1S_REG_GAIN_H 0x3508
> +#define OX05B1S_REG_GAIN_L 0x3509
> +
> +#define client_to_ox05b1s(client)\
> + container_of(i2c_get_clientdata(client), struct ox05b1s, subdev)
> +
> +struct ox05b1s_sizes {
> + u32 code;
> + const struct v4l2_area *sizes;
> +};
> +
> +struct ox05b1s_plat_data {
> + char name[20];
> + u32 chip_id;
> + u32 native_width;
> + u32 native_height;
> + u32 active_top;
> + u32 active_left;
> + u32 active_width;
> + u32 active_height;
> + const struct ox05b1s_mode *supported_modes;
> + u32 default_mode_index;
> + const struct ox05b1s_sizes *supported_codes;
> +};
> +
> +struct ox05b1s_ctrls {
> + struct v4l2_ctrl_handler handler;
> + struct v4l2_ctrl *link_freq;
> + struct v4l2_ctrl *pixel_rate;
> + struct v4l2_ctrl *hblank;
> + struct v4l2_ctrl *vblank;
> + struct v4l2_ctrl *gain;
> + struct v4l2_ctrl *exposure;
> +};
> +
> +struct ox05b1s_mode {
> + u32 index;
> + u32 width;
> + u32 height;
> + u32 code;
> + u32 bpp;
> + u32 vts; /* default VTS */
> + u32 hts; /* default HTS */
> + u32 exp; /* max exposure */
> + bool h_bin; /* horizontal binning */
> + u32 fps;
> + struct ox05b1s_reglist *reg_data;
> +};
> +
> +/* regulator supplies */
> +static const char * const ox05b1s_supply_name[] = {
> + "AVDD", /* Analog voltage supply, 2.8 volts */
> + "DVDD", /* Digital I/O voltage supply, 1.8 volts */
> + "DOVDD", /* Digital voltage supply, 1.2 volts */
> +};
> +
> +#define OX05B1S_NUM_SUPPLIES ARRAY_SIZE(ox05b1s_supply_name)
> +
> +struct ox05b1s {
> + struct i2c_client *i2c_client;
> + struct regmap *regmap;
> + struct gpio_desc *rst_gpio;
> + struct regulator_bulk_data supplies[OX05B1S_NUM_SUPPLIES];
> + struct clk *sensor_clk;
> + const struct ox05b1s_plat_data *model;
> + struct v4l2_subdev subdev;
> + struct media_pad pads[OX05B1S_SENS_PADS_NUM];
> + const struct ox05b1s_mode *mode;
> + struct mutex lock; /* sensor lock */
> + u32 stream_status;
> + struct ox05b1s_ctrls ctrls;
> +};
> +
> +static struct ox05b1s_mode ox05b1s_supported_modes[] = {
> + {
> + .index = 0,
> + .width = 2592,
> + .height = 1944,
> + .code = MEDIA_BUS_FMT_SGRBG10_1X10,
> + .bpp = 10,
> + .vts = 0x850,
> + .hts = 0x2f0,
> + .exp = 0x850 - 8,
> + .h_bin = false,
> + .fps = 30,
> + .reg_data = ox05b1s_reglist_2592x1944,
> + }, {
> + /* sentinel */
> + }
> +};
> +
> +/* keep in sync with ox05b1s_supported_modes*/
> +static const struct v4l2_area ox05b1s_sgrbg10_sizes[] = {
> + {
> + .width = 2592,
> + .height = 1944,
> + }, {
> + /* sentinel */
> + }
> +};
> +
> +static const struct ox05b1s_sizes ox05b1s_supported_codes[] = {
> + {
> + .code = MEDIA_BUS_FMT_SGRBG10_1X10,
> + .sizes = ox05b1s_sgrbg10_sizes,
> + }, {
> + /* sentinel */
> + }
> +};
> +
> +static const struct regmap_config ox05b1s_regmap_config = {
> + .reg_bits = 16,
> + .val_bits = 8,
> + .cache_type = REGCACHE_RBTREE,
> +};
> +
> +static int ox05b1s_power_on(struct ox05b1s *sensor)
> +{
> + struct device *dev = &sensor->i2c_client->dev;
> + int ret = 0;
> +
> + ret = regulator_bulk_enable(OX05B1S_NUM_SUPPLIES, sensor->supplies);
> + if (ret) {
> + dev_err(dev, "Failed to enable regulators\n");
> + return ret;
> + }
> +
> + /* get out of powerdown and reset */
> + gpiod_set_value_cansleep(sensor->rst_gpio, 0);
> +
> + ret = clk_prepare_enable(sensor->sensor_clk);
> + if (ret < 0) {
> + dev_err(dev, "Enable sensor clk fail ret=%d\n", ret);
> + goto reg_off;
> + }
> +
> + /* with XVCLK@24MHz, t2 = 6ms required delay for ox05b1s before first SCCB transaction */
> + fsleep(6000);
> +
> + return ret;
> +
> +reg_off:
> + regulator_bulk_disable(OX05B1S_NUM_SUPPLIES, sensor->supplies);
> +
> + return ret;
> +}
> +
> +static int ox05b1s_power_off(struct ox05b1s *sensor)
> +{
> + gpiod_set_value_cansleep(sensor->rst_gpio, 1);
> +
> + /* XVCLK must be active for 512 cycles (0.34 ms at 24MHz) after last SCCB transaction */
> + fsleep(350);
> + clk_disable_unprepare(sensor->sensor_clk);
> +
> + regulator_bulk_disable(OX05B1S_NUM_SUPPLIES, sensor->supplies);
> +
> + return 0;
> +}
> +
> +static int ox05b1s_runtime_suspend(struct device *dev)
> +{
> + struct v4l2_subdev *sd = dev_get_drvdata(dev);
> + struct i2c_client *client = v4l2_get_subdevdata(sd);
> + struct ox05b1s *sensor = client_to_ox05b1s(client);
> +
> + return ox05b1s_power_off(sensor);
> +}
> +
> +static int ox05b1s_runtime_resume(struct device *dev)
> +{
> + struct v4l2_subdev *sd = dev_get_drvdata(dev);
> + struct i2c_client *client = v4l2_get_subdevdata(sd);
> + struct ox05b1s *sensor = client_to_ox05b1s(client);
> +
> + return ox05b1s_power_on(sensor);
> +}
> +
> +static int ox05b1s_write_reg(struct ox05b1s *sensor, u16 reg, u8 val)
> +{
> + struct device *dev = &sensor->i2c_client->dev;
> + int ret;
> +
> + ret = regmap_write(sensor->regmap, reg, val);
> + if (ret < 0)
> + dev_err(dev, "Failed to write reg addr 0x%04x with 0x%02x\n", reg, val);
> +
> + return ret;
> +}
> +
> +static int ox05b1s_read_reg(struct ox05b1s *sensor, u16 reg, u8 *val)
> +{
> + struct device *dev = &sensor->i2c_client->dev;
> + int ret;
> +
> + ret = regmap_raw_read(sensor->regmap, reg, val, 1);
> + if (ret)
> + dev_err(dev, "Read reg error: reg=%x, val=%x\n", reg, *val);
> +
> + return ret;
> +}
> +
> +#define OX05B1S_MAX_REG_BULK 16
> +static int ox05b1s_write_reg_array(struct ox05b1s *sensor,
> + struct ox05b1s_reg *reg_array)
> +{
> + struct device *dev = &sensor->i2c_client->dev;
> + struct ox05b1s_reg *table = reg_array;
> + u8 vals[OX05B1S_MAX_REG_BULK];
> + int i;
> + int ret;
> +
> + while (table->addr) {
> + for (i = 0; i < OX05B1S_MAX_REG_BULK; i++) {
> + if (table[i].addr != (table[0].addr + i))
> + break;
> + vals[i] = table[i].data;
> + }
> + ret = regmap_bulk_write(sensor->regmap, table->addr, vals, i);
> + if (ret) {
> + dev_err(dev, "Failed to write reg addr=%x, count %d\n", table->addr, i);
> + return ret;
> + }
> + table += i;
> + }
> +
> + return 0;
> +}
> +
> +static int ox05b1s_set_hts(struct ox05b1s *sensor, u32 hts)
> +{
> + u8 values[2] = { (u8)(hts >> 8) & 0xff, (u8)(hts & 0xff) };
> +
> + return regmap_bulk_write(sensor->regmap, OX05B1S_REG_TIMING_HTS_H, values, 2);
> +}
> +
> +static int ox05b1s_set_vts(struct ox05b1s *sensor, u32 vts)
> +{
> + u8 values[2] = { (u8)(vts >> 8) & 0xff, (u8)(vts & 0xff) };
> +
> + return regmap_bulk_write(sensor->regmap, OX05B1S_REG_TIMING_VTS_H, values, 2);
> +}
> +
> +static int ox05b1s_set_exp(struct ox05b1s *sensor, u32 exp)
> +{
> + u8 values[2] = { (u8)(exp >> 8) & 0xff, (u8)(exp & 0xff) };
> +
> + return regmap_bulk_write(sensor->regmap, OX05B1S_REG_EXPOSURE_H, values, 2);
> +}
> +
> +static int ox05b1s_set_analog_gain(struct ox05b1s *sensor, u32 again)
> +{
> + u8 values[2] = { (u8)(again >> 8) & 0xff, (u8)(again & 0xff) };
> +
> + /* real gain */
> + return regmap_bulk_write(sensor->regmap, OX05B1S_REG_GAIN_H, values, 2);
> +}
> +
> +static inline struct v4l2_subdev *ctrl_to_sd(struct v4l2_ctrl *ctrl)
> +{
> + return &container_of(ctrl->handler, struct ox05b1s,
> + ctrls.handler)->subdev;
> +}
> +
> +static int ox05b1s_s_ctrl(struct v4l2_ctrl *ctrl)
> +{
> + struct v4l2_subdev *sd = ctrl_to_sd(ctrl);
> + struct i2c_client *client = v4l2_get_subdevdata(sd);
> + struct ox05b1s *sensor = client_to_ox05b1s(client);
> + u32 w = sensor->mode->width;
> + u32 h = sensor->mode->height;
> + int ret = 0;
> +
> + /* apply V4L2 controls values only if power is already up */
> + if (!pm_runtime_get_if_in_use(&client->dev))
> + return 0;
> +
> + /* s_ctrl holds sensor lock */
> + switch (ctrl->id) {
> + case V4L2_CID_VBLANK:
> + ret = ox05b1s_set_vts(sensor, h + ctrl->val);
> + break;
> + case V4L2_CID_HBLANK:
> + if (sensor->mode->h_bin)
> + ret = ox05b1s_set_hts(sensor, w + ctrl->val);
> + else
> + ret = ox05b1s_set_hts(sensor, (w + ctrl->val) / 2);
> + break;
> + case V4L2_CID_PIXEL_RATE:
> + /* Read-only, but we adjust it based on mode. */
> + break;
> + case V4L2_CID_ANALOGUE_GAIN:
> + ret = ox05b1s_set_analog_gain(sensor, ctrl->val);
> + break;
> + case V4L2_CID_EXPOSURE:
> + ret = ox05b1s_set_exp(sensor, ctrl->val);
> + break;
> + default:
> + ret = -EINVAL;
> + break;
> + }
> +
> + pm_runtime_put(&client->dev);
> +
> + return ret;
> +}
> +
> +static const struct v4l2_ctrl_ops ox05b1s_ctrl_ops = {
> + .s_ctrl = ox05b1s_s_ctrl,
> +};
> +
> +/*
> + * MIPI CSI-2 link frequencies.
> + * link_freq = (pixel_rate * bpp) / (2 * data_lanes)
> + */
> +static const s64 ox05b1s_csi2_link_freqs[] = {
> + 200000000,
> +};
> +
> +/* Link freq for default mode: 1080p RAW10, 4 data lanes 800 Mbps/lane. */
> +#define OX05B1S_DEFAULT_LINK_FREQ 0
> +
> +static int ox05b1s_init_controls(struct ox05b1s *sensor)
> +{
> + const struct v4l2_ctrl_ops *ops = &ox05b1s_ctrl_ops;
> + struct ox05b1s_ctrls *ctrls = &sensor->ctrls;
> + struct v4l2_ctrl_handler *hdl = &ctrls->handler;
> + struct device *dev = &sensor->i2c_client->dev;
> + struct v4l2_fwnode_device_properties props;
> + int ret;
> +
> + v4l2_ctrl_handler_init(hdl, 7);
> +
> + /* we can use our own mutex for the ctrl lock */
> + hdl->lock = &sensor->lock;
> +
> + /* Clock related controls */
> + ctrls->link_freq = v4l2_ctrl_new_int_menu(hdl, ops,
> + V4L2_CID_LINK_FREQ,
> + ARRAY_SIZE(ox05b1s_csi2_link_freqs) - 1,
> + OX05B1S_DEFAULT_LINK_FREQ,
> + ox05b1s_csi2_link_freqs);
> +
> + /* mode dependent, actual range set in ox05b1s_update_controls */
> + ctrls->pixel_rate = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_PIXEL_RATE,
> + 0, 0, 1, 0);
> +
> + ctrls->hblank = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_HBLANK,
> + 0, 0, 1, 0);
> +
> + ctrls->vblank = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_VBLANK,
> + 0, 0, 1, 0);
> +
> + ctrls->exposure = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_EXPOSURE,
> + 0, 0, 1, 0);
> +
> + ctrls->gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_ANALOGUE_GAIN,
> + 0, 0xFFFF, 1, 0x80);
> +
> + if (hdl->error) {
> + ret = hdl->error;
> + goto free_ctrls;
> + }
> +
> + ctrls->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> + ctrls->pixel_rate->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> +
> + ret = v4l2_fwnode_device_parse(dev, &props);
> + if (ret)
> + goto free_ctrls;
> +
> + ret = v4l2_ctrl_new_fwnode_properties(hdl, ops, &props);
> + if (ret)
> + goto free_ctrls;
> +
> + sensor->subdev.ctrl_handler = hdl;
> + return 0;
> +
> +free_ctrls:
> + dev_err(dev, "Failed to init controls\n");
> + v4l2_ctrl_handler_free(hdl);
> + return ret;
> +}
> +
> +static int ox05b1s_apply_current_mode(struct ox05b1s *sensor);
> +
> +static int ox05b1s_s_stream(struct v4l2_subdev *sd, int enable)
> +{
> + struct i2c_client *client = v4l2_get_subdevdata(sd);
> + struct ox05b1s *sensor = client_to_ox05b1s(client);
> + int ret = 0;
> +
> + if (enable) {
> + ret = pm_runtime_resume_and_get(&client->dev);
> + if (ret < 0)
> + return ret;
> + ret = ox05b1s_apply_current_mode(sensor);
> + if (!ret)
> + ret = ox05b1s_write_reg(sensor, OX05B1S_REG_SW_STB, 0x01);
> + } else {
> + ret = ox05b1s_write_reg(sensor, OX05B1S_REG_SW_STB, 0x00);
> + }
> +
> + sensor->stream_status = enable;
> +
> + if (!enable || ret) {
> + pm_runtime_mark_last_busy(&sensor->i2c_client->dev);
> + pm_runtime_put_autosuspend(&client->dev);
> + }
> +
> + return 0;
> +}
> +
> +static void ox05b1s_update_pad_format(struct ox05b1s *sensor,
> + const struct ox05b1s_mode *mode,
> + struct v4l2_mbus_framefmt *fmt)
> +{
> + fmt->code = mode->code;
> + fmt->width = mode->width;
> + fmt->height = mode->height;
> + fmt->field = V4L2_FIELD_NONE;
> + fmt->colorspace = V4L2_COLORSPACE_RAW;
> + fmt->quantization = V4L2_QUANTIZATION_FULL_RANGE;
> + fmt->xfer_func = V4L2_XFER_FUNC_NONE;
> +}
> +
> +static int ox05b1s_init_state(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state)
> +{
> + struct i2c_client *client = v4l2_get_subdevdata(sd);
> + struct ox05b1s *sensor = client_to_ox05b1s(client);
> + struct v4l2_mbus_framefmt *format;
> +
> + /* Initialize the format. */
> + format = v4l2_subdev_state_get_format(state, 0);
> + ox05b1s_update_pad_format(sensor, &sensor->model->supported_modes[0], format);
> +
> + return 0;
> +}
> +
> +static int ox05b1s_enum_mbus_code(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state,
> + struct v4l2_subdev_mbus_code_enum *code)
> +{
> + struct i2c_client *client = v4l2_get_subdevdata(sd);
> + struct ox05b1s *sensor = client_to_ox05b1s(client);
> + const struct ox05b1s_sizes *supported_codes = sensor->model->supported_codes;
> + int i = 0;
> +
> + while (i++ < code->index && supported_codes->code)
> + supported_codes++;
> + if (!supported_codes->code) /* code->index outside supported_codes[] */
> + return -EINVAL;
> +
> + code->code = supported_codes->code;
> +
> + return 0;
> +}
> +
> +static int ox05b1s_enum_frame_size(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *sd_state,
> + struct v4l2_subdev_frame_size_enum *fse)
> +{
> + struct i2c_client *client = v4l2_get_subdevdata(sd);
> + struct ox05b1s *sensor = client_to_ox05b1s(client);
> + const struct ox05b1s_sizes *supported_codes = sensor->model->supported_codes;
> + const struct v4l2_area *sizes;
> + int i = 0;
> +
> + if (fse->pad != 0)
> + return -EINVAL;
> +
> + while (supported_codes->code) {
> + if (supported_codes->code == fse->code)
> + break;
> + supported_codes++;
> + }
> +
> + if (!supported_codes->code) /* fse->code not in supported_codes[] */
> + return -EINVAL;
> +
> + sizes = supported_codes->sizes;
> + while (i++ < fse->index && sizes->width)
> + sizes++;
> + if (!sizes->width) /* fse->index outside sizes[] */
> + return -EINVAL;
> +
> + fse->min_width = sizes->width;
> + fse->max_width = fse->min_width;
> + fse->min_height = sizes->height;
> + fse->max_height = fse->min_height;
> +
> + return 0;
> +}
> +
> +/* Update control ranges based on current streaming mode, needs sensor lock */
> +static int ox05b1s_update_controls(struct ox05b1s *sensor)
> +{
> + int ret;
> + struct device *dev = &sensor->i2c_client->dev;
> + u32 hts = sensor->mode->hts;
> + u32 hblank;
> + u32 vts = sensor->mode->vts;
> + u32 vblank = vts - sensor->mode->height;
> + u32 fps = sensor->mode->fps;
> + u64 pixel_rate = (sensor->mode->h_bin) ? hts * vts * fps : 2 * hts * vts * fps;
Unless the sensor adjusts the pixel rate when you write the blanking
registers, this doesn't seem correct.
> + u32 min_exp = 8;
> + u32 max_exp = vts - 8;
> +
> + ret = __v4l2_ctrl_modify_range(sensor->ctrls.pixel_rate, pixel_rate,
> + pixel_rate, 1, pixel_rate);
> + if (ret) {
> + dev_err(dev, "Modify range for ctrl: pixel_rate %llu-%llu failed\n",
> + pixel_rate, pixel_rate);
> + goto out;
> + }
> +
> + if (sensor->mode->h_bin)
> + hblank = hts - sensor->mode->width;
> + else
> + hblank = 2 * hts - sensor->mode->width;
> +
> + ret = __v4l2_ctrl_modify_range(sensor->ctrls.hblank, hblank, hblank,
> + 1, hblank);
> + if (ret) {
> + dev_err(dev, "Modify range for ctrl: hblank %u-%u failed\n",
> + hblank, hblank);
> + goto out;
> + }
> + __v4l2_ctrl_s_ctrl(sensor->ctrls.hblank, sensor->ctrls.hblank->default_value);
> +
> + ret = __v4l2_ctrl_modify_range(sensor->ctrls.vblank, 0, vblank * 4,
> + 1, vblank);
> + if (ret) {
> + dev_err(dev, "Modify range for ctrl: vblank %u-%u failed\n",
> + vblank, vblank);
> + goto out;
> + }
> + __v4l2_ctrl_s_ctrl(sensor->ctrls.vblank, sensor->ctrls.vblank->default_value);
> +
> + ret = __v4l2_ctrl_modify_range(sensor->ctrls.exposure, min_exp, max_exp,
> + 1, max_exp / 2);
> + if (ret) {
> + dev_err(dev, "Modify range for ctrl: exposure %u-%u failed\n",
> + min_exp, max_exp);
> + goto out;
> + }
> + __v4l2_ctrl_s_ctrl(sensor->ctrls.exposure, sensor->ctrls.exposure->default_value);
> +
> +out:
> + return ret;
> +}
> +
> +/* needs sensor lock and power on */
> +static int ox05b1s_apply_current_mode(struct ox05b1s *sensor)
> +{
> + struct device *dev = &sensor->i2c_client->dev;
> + struct ox05b1s_reglist *reg_data = sensor->mode->reg_data;
> + int ret = 0;
> +
> + ox05b1s_write_reg(sensor, OX05B1S_REG_SW_RST, 0x01);
> +
> + while (reg_data->regs) {
> + ret = ox05b1s_write_reg_array(sensor, reg_data->regs);
> + if (ret)
> + goto out;
> + reg_data++;
> + }
> +
> + /* setup handler will write actual controls into sensor registers */
> + ret = __v4l2_ctrl_handler_setup(&sensor->ctrls.handler);
> +
> +out:
> + if (ret < 0)
> + dev_err(dev, "Failed to apply mode %dx%d,bpp=%d\n", sensor->mode->width,
> + sensor->mode->height, sensor->mode->bpp);
> +
> + return ret;
> +}
> +
> +/* similar with v4l2_find_nearest_size but filter for mbus code, needs sensor lock */
> +static const struct ox05b1s_mode *ox05b1s_nearest_size(const struct ox05b1s_mode *supported_modes,
> + struct v4l2_subdev_format *fmt)
> +{
> + u32 error, min_error = U32_MAX;
> + const struct ox05b1s_mode *best = NULL;
> +
> + if (!supported_modes)
> + return NULL;
> +
> + while (supported_modes->width) {
> + const u32 w = supported_modes->width;
> + const u32 h = supported_modes->height;
> +
> + if (supported_modes->code != fmt->format.code)
> + continue;
> +
> + error = abs(w - fmt->format.width) + abs(h - fmt->format.height);
> + if (error > min_error)
> + continue;
> +
> + min_error = error;
> + best = supported_modes;
> + if (!error)
> + break;
> +
> + supported_modes++;
> + }
> +
> + return best;
> +}
> +
> +/* get a valid mbus code for the model, either the requested one or the default one */
> +static u32 ox05b1s_find_code(const struct ox05b1s_plat_data *model, u32 code)
> +{
> + u32 found_code = 0;
> + const struct ox05b1s_sizes *supported_codes = model->supported_codes;
> +
> + while (supported_codes->code) {
> + if (supported_codes->code == code) {
> + found_code = code;
> + break;
> + }
> + supported_codes++;
> + }
> +
> + if (!supported_codes->code) /* code not in supported_codes[] */
> + found_code = model->supported_codes[model->default_mode_index].code;
> +
> + return found_code;
> +}
> +
> +static int ox05b1s_set_fmt(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state,
> + struct v4l2_subdev_format *fmt)
> +{
> + struct i2c_client *client = v4l2_get_subdevdata(sd);
> + struct ox05b1s *sensor = client_to_ox05b1s(client);
> + struct device *dev = &sensor->i2c_client->dev;
> + struct v4l2_mbus_framefmt *format;
> + const struct ox05b1s_mode *mode;
> +
> + /* if no matching mbus code is found, use the one from the default mode */
> + fmt->format.code = ox05b1s_find_code(sensor->model, fmt->format.code);
> + mode = ox05b1s_nearest_size(sensor->model->supported_modes, fmt);
> +
> + fmt->format.width = mode->width;
> + fmt->format.height = mode->height;
> + fmt->format.field = V4L2_FIELD_NONE;
> +
> + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
> + format = v4l2_subdev_state_get_format(state, 0);
> + *format = fmt->format;
> + return 0;
> + }
> +
> + sensor->mode = mode;
> +
> + /* update controls that depend on current mode */
> + ox05b1s_update_controls(sensor);
> +
> + dev_dbg(dev, "Set mode index=%d, %d x %d, code=0x%x\n", sensor->mode->index,
> + fmt->format.width, fmt->format.height, fmt->format.code);
> +
> + return 0;
> +}
> +
> +static u8 ox05b1s_code2dt(const u32 code)
> +{
> + switch (code) {
> + case MEDIA_BUS_FMT_SGRBG10_1X10:
> + return MIPI_CSI2_DT_RAW10;
> + default:
> + return MIPI_CSI2_DT_RAW10;
> + }
> +}
> +
> +static int ox05b1s_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad,
> + struct v4l2_mbus_frame_desc *fd)
> +{
> + struct i2c_client *client = v4l2_get_subdevdata(sd);
> + struct ox05b1s *sensor = client_to_ox05b1s(client);
> +
> + fd->type = V4L2_MBUS_FRAME_DESC_TYPE_CSI2;
> + fd->num_entries = 1;
> +
> + /* get sensor current code*/
> + mutex_lock(&sensor->lock);
> + fd->entry[0].pixelcode = sensor->mode->code;
> + mutex_unlock(&sensor->lock);
> +
> + fd->entry[0].bus.csi2.vc = 0;
> + fd->entry[0].bus.csi2.dt = ox05b1s_code2dt(fd->entry[0].pixelcode);
> +
> + return 0;
> +}
> +
> +static int ox05b1s_get_selection(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *sd_state,
> + struct v4l2_subdev_selection *sel)
> +{
> + struct i2c_client *client = v4l2_get_subdevdata(sd);
> + struct ox05b1s *sensor = client_to_ox05b1s(client);
> +
> + switch (sel->target) {
> + case V4L2_SEL_TGT_NATIVE_SIZE:
> + case V4L2_SEL_TGT_CROP_BOUNDS:
> + sel->r.top = 0;
> + sel->r.left = 0;
> + sel->r.width = sensor->model->native_width;
> + sel->r.height = sensor->model->native_height;
> + return 0;
> + case V4L2_SEL_TGT_CROP:
> + case V4L2_SEL_TGT_CROP_DEFAULT:
> + sel->r.top = sensor->model->active_top;
> + sel->r.left = sensor->model->active_left;
> + sel->r.width = sensor->model->active_width;
> + sel->r.height = sensor->model->active_height;
> + return 0;
> + }
> +
> + return -EINVAL;
> +}
> +
> +static const struct v4l2_subdev_video_ops ox05b1s_subdev_video_ops = {
> + .s_stream = ox05b1s_s_stream,
> +};
> +
> +static const struct v4l2_subdev_pad_ops ox05b1s_subdev_pad_ops = {
> + .set_fmt = ox05b1s_set_fmt,
> + .get_fmt = v4l2_subdev_get_fmt,
> + .get_frame_desc = ox05b1s_get_frame_desc,
> + .enum_mbus_code = ox05b1s_enum_mbus_code,
> + .enum_frame_size = ox05b1s_enum_frame_size,
> + .get_selection = ox05b1s_get_selection,
> +};
> +
> +static const struct v4l2_subdev_ops ox05b1s_subdev_ops = {
> + .video = &ox05b1s_subdev_video_ops,
> + .pad = &ox05b1s_subdev_pad_ops,
> +};
> +
> +static const struct v4l2_subdev_internal_ops ox05b1s_internal_ops = {
> + .init_state = ox05b1s_init_state,
> +};
> +
> +static void ox05b1s_get_gpios(struct ox05b1s *sensor)
> +{
> + struct device *dev = &sensor->i2c_client->dev;
> +
> + sensor->rst_gpio = devm_gpiod_get_optional(dev, "reset",
> + GPIOD_OUT_HIGH);
> + if (IS_ERR(sensor->rst_gpio))
> + dev_warn(dev, "No sensor reset pin available");
> +}
> +
> +static int ox05b1s_get_regulators(struct ox05b1s *sensor)
> +{
> + struct device *dev = &sensor->i2c_client->dev;
> + unsigned int i;
> +
> + for (i = 0; i < OX05B1S_NUM_SUPPLIES; i++)
> + sensor->supplies[i].supply = ox05b1s_supply_name[i];
> +
> + return devm_regulator_bulk_get(dev, OX05B1S_NUM_SUPPLIES, sensor->supplies);
> +}
> +
> +static int ox05b1s_read_chip_id(struct ox05b1s *sensor)
> +{
> + struct device *dev = &sensor->i2c_client->dev;
> + u32 chip_id = 0;
> + u8 reg_val = 0;
> + char *camera_name;
> + int ret = 0;
> +
> + ret = ox05b1s_read_reg(sensor, OX05B1S_REG_CHIP_ID_23_16, ®_val);
> + chip_id |= reg_val << 16;
> + ret |= ox05b1s_read_reg(sensor, OX05B1S_REG_CHIP_ID_15_8, ®_val);
> + chip_id |= reg_val << 8;
> + ret |= ox05b1s_read_reg(sensor, OX05B1S_REG_CHIP_ID_7_0, ®_val);
> + chip_id |= reg_val;
> + if (ret) {
> + dev_err(dev, "Camera chip_id read error\n");
> + return -ENODEV;
> + }
> +
> + switch (chip_id) {
> + case 0x580542:
> + camera_name = "ox05b1s";
> + break;
> + default:
> + camera_name = "unknown";
> + break;
> + }
> +
> + if (chip_id == sensor->model->chip_id) {
> + dev_info(dev, "Camera %s detected, chip_id=%x\n", camera_name, chip_id);
> + } else {
> + dev_err(dev, "Detected %s camera (chip_id=%x), but expected %s (chip_id=%x)\n",
> + camera_name, chip_id, sensor->model->name, sensor->model->chip_id);
> + ret = -ENODEV;
> + }
> +
> + return ret;
> +}
> +
> +static int ox05b1s_probe(struct i2c_client *client)
> +{
> + int retval;
> + struct device *dev = &client->dev;
> + struct v4l2_subdev *sd;
> + struct ox05b1s *sensor;
> +
> + sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL);
> + if (!sensor)
> + return -ENOMEM;
> +
> + sensor->regmap = devm_regmap_init_i2c(client, &ox05b1s_regmap_config);
> + if (IS_ERR(sensor->regmap))
> + return PTR_ERR(sensor->regmap);
> +
> + sensor->i2c_client = client;
> +
> + sensor->model = of_device_get_match_data(dev);
> +
> + ox05b1s_get_gpios(sensor);
> +
> + /* Get system clock, xvclk */
> + sensor->sensor_clk = devm_clk_get(dev, NULL);
> + if (IS_ERR(sensor->sensor_clk)) {
> + return dev_err_probe(dev, PTR_ERR(sensor->sensor_clk),
> + "Failed to get xvclk\n");
> + }
> +
> + retval = ox05b1s_get_regulators(sensor);
> + if (retval)
> + return dev_err_probe(dev, retval, "Failed to get regulators\n");
> +
> + sd = &sensor->subdev;
> + v4l2_i2c_subdev_init(sd, client, &ox05b1s_subdev_ops);
> + sd->internal_ops = &ox05b1s_internal_ops;
> + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
> + sd->dev = &client->dev;
> + sd->entity.function = MEDIA_ENT_F_CAM_SENSOR;
> + sensor->pads[OX05B1S_SENS_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
> + retval = media_entity_pads_init(&sd->entity, OX05B1S_SENS_PADS_NUM,
> + sensor->pads);
> + if (retval)
> + goto probe_out;
> +
> + mutex_init(&sensor->lock);
> +
> + retval = ox05b1s_init_controls(sensor);
> + if (retval)
> + goto probe_err_entity_cleanup;
> +
> + /* power on manually */
> + retval = ox05b1s_power_on(sensor);
> + if (retval) {
> + dev_err(dev, "Failed to power on\n");
> + goto probe_err_free_ctrls;
> + }
> +
> + pm_runtime_set_active(dev);
> + pm_runtime_get_noresume(dev);
> + pm_runtime_enable(dev);
> +
> + retval = ox05b1s_read_chip_id(sensor);
> + if (retval)
> + goto probe_err_pm_runtime;
> +
> + v4l2_i2c_subdev_set_name(sd, client, sensor->model->name, NULL);
> +
> + /* Centrally managed subdev active state */
> + sd->state_lock = &sensor->lock;
> + retval = v4l2_subdev_init_finalize(sd);
> + if (retval < 0) {
> + dev_err(dev, "Subdev init error: %d\n", retval);
> + goto probe_err_pm_runtime;
> + }
> +
> + retval = v4l2_async_register_subdev_sensor(sd);
> + if (retval < 0) {
> + dev_err(&client->dev, "Async register failed, ret=%d\n", retval);
> + goto probe_err_subdev_cleanup;
> + }
> +
> + sensor->mode = &sensor->model->supported_modes[0];
> + ox05b1s_update_controls(sensor);
> +
> + pm_runtime_set_autosuspend_delay(dev, 1000);
> + pm_runtime_use_autosuspend(dev);
> + pm_runtime_put_autosuspend(dev);
> +
> + return 0;
> +
> +probe_err_subdev_cleanup:
> + v4l2_subdev_cleanup(sd);
> +probe_err_pm_runtime:
> + pm_runtime_put_noidle(dev);
> + pm_runtime_disable(dev);
> + ox05b1s_runtime_suspend(dev);
> +probe_err_free_ctrls:
> + v4l2_ctrl_handler_free(&sensor->ctrls.handler);
> +probe_err_entity_cleanup:
> + media_entity_cleanup(&sd->entity);
> +probe_out:
> + return retval;
> +}
> +
> +static void ox05b1s_remove(struct i2c_client *client)
> +{
> + struct v4l2_subdev *sd = i2c_get_clientdata(client);
> + struct ox05b1s *sensor = client_to_ox05b1s(client);
> + struct device *dev = &client->dev;
> +
> + pm_runtime_disable(dev);
> + if (!pm_runtime_status_suspended(dev))
> + ox05b1s_runtime_suspend(dev);
> + pm_runtime_set_suspended(dev);
> + v4l2_async_unregister_subdev(sd);
> + v4l2_subdev_cleanup(sd);
> + media_entity_cleanup(&sd->entity);
> + v4l2_ctrl_handler_free(&sensor->ctrls.handler);
> + mutex_destroy(&sensor->lock);
> +}
> +
> +static DEFINE_RUNTIME_DEV_PM_OPS(ox05b1s_pm_ops, ox05b1s_runtime_suspend,
> + ox05b1s_runtime_resume, NULL);
> +
> +static const struct ox05b1s_plat_data ox05b1s_data = {
> + .name = "ox05b1s",
> + .chip_id = 0x580542,
> + .native_width = 2608, /* 8 dummy + 2592 active pixels + 8 dummy */
> + .native_height = 1960, /* 8 dummy + 1944 active lines + 8 dummy */
> + .active_top = 8,
> + .active_left = 8,
> + .active_width = 2592,
> + .active_height = 1944,
> + .supported_modes = ox05b1s_supported_modes,
> + .default_mode_index = 0,
> + .supported_codes = ox05b1s_supported_codes,
> +};
> +
> +static const struct of_device_id ox05b1s_of_match[] = {
> + {
> + .compatible = "ovti,ox05b1s",
> + .data = &ox05b1s_data,
> + },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, ox05b1s_of_match);
> +
> +static struct i2c_driver ox05b1s_i2c_driver = {
> + .driver = {
> + .name = "ox05b1s",
> + .pm = pm_ptr(&ox05b1s_pm_ops),
> + .of_match_table = ox05b1s_of_match,
> + },
> + .probe = ox05b1s_probe,
> + .remove = ox05b1s_remove,
> +};
> +
> +module_i2c_driver(ox05b1s_i2c_driver);
> +MODULE_DESCRIPTION("Omnivision OX05B1S MIPI Camera Subdev Driver");
> +MODULE_AUTHOR("Mirela Rabulea <mirela.rabulea@xxxxxxx>");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/media/i2c/ox05b1s/ox05b1s_modes.c b/drivers/media/i2c/ox05b1s/ox05b1s_modes.c
> new file mode 100644
> index 000000000000..1830e9a9cc35
> --- /dev/null
> +++ b/drivers/media/i2c/ox05b1s/ox05b1s_modes.c
> @@ -0,0 +1,1171 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Register configurations for all sensor supported modes
> + * Copyright (C) 2024, NXP
> + * Copyright (C) 2024, Omnivision
> + * Copyright (C) 2024, Verisilicon
> + *
> + */
> +
> +#include "ox05b1s.h"
> +
> +/*
> + * Register configuration for Omnivision OX05B1S raw camera
> + * 2592X1944_30FPS_FULL_RGBIr 2592 1944
> + */
> +struct ox05b1s_reg ovx5b_init_setting_2592x1944[] = {
This is a very large table, with lots of writes for consecutive
registers. I expect it will take a significant time to be applied.
Writing the register address each time essentially triples the I2C write
time for writes to consecutive registers. Could the table be compacted
to make use of the address auto-increment ?
I'm also surprised by the large amount of registers that need to be
written here. Are you sure that all those values differ from the
sensor's defaults ? Can't a significant portion of the table be ommitted
otherwise ?
> + {0x0100, 0x00},
Please use register macros for the registers that are documented.
> + {0x0107, 0x01}, /* reserved */
> + {0x0104, 0x00},
> + {0x0301, 0x1a},
> + {0x0304, 0x01},
> + {0x0305, 0xe0},
> + {0x0306, 0x04},
> + {0x0307, 0x02}, /* reset 0x01 */
> + {0x0321, 0x03},
> + {0x0324, 0x01},
> + {0x0325, 0x80},
> + {0x0341, 0x03},
> + {0x0344, 0x01},
> + {0x0345, 0xb0},
> + {0x0347, 0x07},
> + {0x034a, 0x05}, /* reset 0x03 */
> + {0x034b, 0x06},
> + {0x0360, 0x80}, /* PLL_CTRL_REG60 bit7 mipi_enable */
> + {0x0400, 0xe8},
> + {0x0401, 0x00},
> + {0x0402, 0x2b},
> + {0x0403, 0x32},
> + {0x0404, 0x3a},
> + {0x0405, 0x00},
> + {0x0406, 0x0c},
> + {0x0407, 0xe8},
> + {0x0408, 0x00},
> + {0x0409, 0x2b},
> + {0x040a, 0x32},
> + {0x040b, 0x5c}, /* reset 0x30 */
> + {0x040c, 0xcd}, /* reset 0x00 */
> + {0x040d, 0x0c},
> + {0x040e, 0xe7},
> + {0x040f, 0xff},
> + {0x0410, 0x2b},
> + {0x0411, 0x32},
> + {0x0412, 0x33},
> + {0x0413, 0x8f},
> + {0x0414, 0x0c},
> + {0x2000, 0x04},
> + {0x2805, 0xff},
> + {0x2806, 0x0f},
> + {0x3000, 0x00},
> + {0x3001, 0x00},
> + {0x3002, 0x10},
> + {0x3004, 0x00},
> + {0x3009, 0x2e},
> + {0x3010, 0x41}, /* SC_CMMN_REG10 mipi_lane_num = 4, phy_mode = 1 */
> + {0x3015, 0xf0},
> + {0x3016, 0xf0},
> + {0x3017, 0xf0},
> + {0x3018, 0xf0}, /* SC_CMMN_REG18 */
> + {0x301a, 0x78},
> + {0x301b, 0xb4},
> + {0x301f, 0xe9},
> + {0x3024, 0x80},
> + {0x3039, 0x00},
> + {0x3044, 0x70},
> + {0x3101, 0x32},
> + {0x3182, 0x10},
> + {0x3187, 0xff},
> + {0x320a, 0x00},
> + {0x320b, 0x00},
> + {0x320c, 0x00},
> + {0x320d, 0x00},
> + {0x320e, 0x00},
> + {0x320f, 0x00},
> + {0x3211, 0x61},
> + {0x3212, 0x00},
> + {0x3215, 0xcc},
> + {0x3218, 0x06},
> + {0x3219, 0x08},
> + {0x3251, 0x00},
> + {0x3252, 0xe4},
> + {0x3253, 0x00},
> + {0x3304, 0x11},
> + {0x3305, 0x00},
> + {0x3306, 0x01},
> + {0x3307, 0x00},
> + {0x3308, 0x02},
> + {0x3309, 0x00},
> + {0x330a, 0x02},
> + {0x330b, 0x00},
> + {0x330c, 0x02},
> + {0x330d, 0x00},
> + {0x330e, 0x02},
> + {0x330f, 0x00},
> + {0x3310, 0x02},
> + {0x3311, 0x00},
> + {0x3312, 0x02},
> + {0x3313, 0x00},
> + {0x3314, 0x02},
> + {0x3315, 0x00},
> + {0x3316, 0x02},
> + {0x3317, 0x11},
> + {0x3400, 0x0c},
> + {0x3421, 0x00},
> + {0x3422, 0x00},
> + {0x3423, 0x00},
> + {0x3424, 0x00},
> + {0x3425, 0x00},
> + {0x3426, 0x00},
> + {0x3427, 0x00},
> + {0x3428, 0x00},
> + {0x3429, 0x40},
> + {0x342a, 0x55},
> + {0x342b, 0x05},
> + {0x342c, 0x00},
> + {0x342d, 0x00},
> + {0x342e, 0x00},
> + {0x3500, 0x00},
> + {0x3501, 0x00},
> + {0x3502, 0x08},
> + {0x3503, 0xa8},
> + {0x3504, 0x08},
> + {0x3505, 0x00},
> + {0x3506, 0x00},
> + {0x3507, 0x00},
> + {0x3508, 0x01},
> + {0x3509, 0x00},
> + {0x350a, 0x01},
> + {0x350b, 0x00},
> + {0x350c, 0x00},
> + {0x3541, 0x00},
> + {0x3542, 0x08},
> + {0x3603, 0x65},
> + {0x3604, 0x24},
> + {0x3608, 0x08},
> + {0x3610, 0x00},
> + {0x3612, 0x00},
> + {0x3619, 0x09},
> + {0x361a, 0x27},
> + {0x3620, 0x40},
> + {0x3622, 0x15},
> + {0x3623, 0x0e},
> + {0x3624, 0x1f},
> + {0x3625, 0x1f},
> + {0x362a, 0x01}, /* ANA_REG2A mipi_pk_0 */
> + {0x362b, 0x00}, /* ANA_REG2B mipi_pk_1 */
> + {0x3633, 0x88},
> + {0x3634, 0x86},
> + {0x3636, 0x80},
> + {0x3638, 0x3b},
> + {0x363a, 0x00},
> + {0x363b, 0x22},
> + {0x363c, 0x07},
> + {0x363d, 0x11},
> + {0x363e, 0x21},
> + {0x363f, 0x24},
> + {0x3640, 0xd3},
> + {0x3641, 0x00},
> + {0x3650, 0xe4},
> + {0x3651, 0x80},
> + {0x3652, 0xff},
> + {0x3653, 0x00},
> + {0x3654, 0x05},
> + {0x3655, 0xf8},
> + {0x3656, 0x00},
> + {0x3660, 0x00},
> + {0x3664, 0x00},
> + {0x366a, 0x80},
> + {0x366b, 0x00},
> + {0x3670, 0x00},
> + {0x3674, 0x00},
> + {0x367b, 0x50},
> + {0x3684, 0x6d},
> + {0x3685, 0x6d},
> + {0x3686, 0x6d},
> + {0x3687, 0x6d},
> + {0x368c, 0x07},
> + {0x368d, 0x07},
> + {0x368e, 0x07},
> + {0x368f, 0x00},
> + {0x3690, 0x04},
> + {0x3691, 0x04},
> + {0x3692, 0x04},
> + {0x3693, 0x04},
> + {0x3698, 0x00},
> + {0x369e, 0x1f},
> + {0x369f, 0x19},
> + {0x36a0, 0x05},
> + {0x36a2, 0x16},
> + {0x36a3, 0x03},
> + {0x36a4, 0x07},
> + {0x36a5, 0x24},
> + {0x36a6, 0x00},
> + {0x36a7, 0x80},
> + {0x36e3, 0x09},
> + {0x3700, 0x07},
> + {0x3701, 0x1b},
> + {0x3702, 0x0a},
> + {0x3703, 0x21},
> + {0x3704, 0x19},
> + {0x3705, 0x07},
> + {0x3706, 0x36},
> + {0x370a, 0x1c},
> + {0x370b, 0x02},
> + {0x370c, 0x00},
> + {0x370d, 0x6e},
> + {0x370f, 0x80},
> + {0x3710, 0x10},
> + {0x3712, 0x09},
> + {0x3714, 0x42},
> + {0x3715, 0x00},
> + {0x3716, 0x02},
> + {0x3717, 0xa2},
> + {0x3718, 0x41},
> + {0x371a, 0x80},
> + {0x371b, 0x0a},
> + {0x371c, 0x0a},
> + {0x371d, 0x08},
> + {0x371e, 0x01},
> + {0x371f, 0x20},
> + {0x3720, 0x0e},
> + {0x3721, 0x22},
> + {0x3722, 0x0c},
> + {0x3727, 0x84},
> + {0x3728, 0x03},
> + {0x3729, 0x64},
> + {0x372a, 0x0c},
> + {0x372b, 0x14},
> + {0x372d, 0x50},
> + {0x372e, 0x14},
> + {0x3731, 0x11},
> + {0x3732, 0x24},
> + {0x3733, 0x00},
> + {0x3734, 0x00},
> + {0x3735, 0x12},
> + {0x3736, 0x00},
> + {0x373b, 0x0b},
> + {0x373c, 0x14},
> + {0x373f, 0x3e},
> + {0x3740, 0x12},
> + {0x3741, 0x12},
> + {0x3753, 0x80},
> + {0x3754, 0x01},
> + {0x3756, 0x11},
> + {0x375c, 0x0f},
> + {0x375d, 0x35},
> + {0x375e, 0x0f},
> + {0x375f, 0x37},
> + {0x3760, 0x0f},
> + {0x3761, 0x27},
> + {0x3762, 0x3f},
> + {0x3763, 0x5d},
> + {0x3764, 0x01},
> + {0x3765, 0x17},
> + {0x3766, 0x02},
> + {0x3768, 0x52},
> + {0x376a, 0x30},
> + {0x376b, 0x02},
> + {0x376c, 0x08},
> + {0x376d, 0x2a},
> + {0x376e, 0x00},
> + {0x376f, 0x18},
> + {0x3770, 0x2c},
> + {0x3771, 0x0c},
> + {0x3772, 0x71},
> + {0x3776, 0xc0},
> + {0x3778, 0x00},
> + {0x3779, 0x80},
> + {0x377a, 0x00},
> + {0x377d, 0x14},
> + {0x377e, 0x0c},
> + {0x379c, 0x25},
> + {0x379f, 0x00},
> + {0x37a3, 0x40},
> + {0x37a4, 0x03},
> + {0x37a5, 0x10},
> + {0x37a6, 0x02},
> + {0x37a7, 0x0e},
> + {0x37a9, 0x00},
> + {0x37aa, 0x08},
> + {0x37ab, 0x08},
> + {0x37ac, 0x36},
> + {0x37ad, 0x40},
> + {0x37b0, 0x48},
> + {0x37d0, 0x00},
> + {0x37d1, 0x0b},
> + {0x37d2, 0x0c},
> + {0x37d3, 0x10},
> + {0x37d4, 0x10},
> + {0x37d5, 0x10},
> + {0x37d8, 0x0e},
> + {0x37d9, 0x0e},
> + {0x37da, 0x3c},
> + {0x37db, 0x52},
> + {0x37dc, 0x50},
> + {0x37dd, 0x00},
> + {0x37de, 0x55},
> + {0x37df, 0x7d},
> + {0x37e5, 0x88},
> + {0x37e7, 0x68},
> + {0x37e8, 0x07},
> + {0x37f0, 0x00},
> + {0x37f1, 0x0e},
> + {0x37f2, 0x35},
> + {0x37f3, 0x14},
> + {0x37f4, 0x0c},
> + {0x37f5, 0x14},
> + {0x37f6, 0x0c},
> + {0x37f7, 0x35},
> + {0x37f8, 0x35},
> + {0x37f9, 0x37},
> + {0x37fa, 0x37},
> + {0x37fb, 0x37},
> + {0x3800, 0x00},
> + {0x3801, 0x00},
> + {0x3802, 0x00},
> + {0x3803, 0x00},
> + {0x3804, 0x0a},
> + {0x3805, 0x2f},
> + {0x3806, 0x07},
> + {0x3807, 0xa7},
> + {0x3808, 0x0a}, /* width 2592 = 0xa20 */
> + {0x3809, 0x20}, /* width */
> + {0x380a, 0x07}, /* height 1944 = 0x798 */
> + {0x380b, 0x98}, /* height */
Please make a reasonable effort to calculate register values related to
timings instead of hardcoding them.
> + {0x380c, 0x02},
> + {0x380d, 0xf0},
> + {0x380e, 0x08},
> + {0x380f, 0x50},
Why are HTS and VTS initialized in this table, given that they will be
written by the HBLANK and VBLANK controls through
__v4l2_ctrl_handler_setup() ?
> + {0x3810, 0x00},
> + {0x3811, 0x08},
> + {0x3812, 0x00},
> + {0x3813, 0x08},
> + {0x3814, 0x11},
> + {0x3815, 0x11},
> + {0x3820, 0x40},
> + {0x3821, 0x04}, /* TIMING_CTRL_REG21 bit[2] = mirror */
> + {0x3822, 0x10},
> + {0x3823, 0x00},
> + {0x3826, 0x00},
> + {0x3827, 0x00},
> + {0x382b, 0x03},
> + {0x382c, 0x0c},
> + {0x382d, 0x15},
> + {0x382e, 0x01},
> + {0x3830, 0x00},
> + {0x3838, 0x00},
> + {0x383b, 0x00},
> + {0x3840, 0x00},
> + {0x384a, 0xa2},
> + {0x3858, 0x00},
> + {0x3859, 0x00},
> + {0x3860, 0x00},
> + {0x3861, 0x00},
> + {0x3866, 0x10},
> + {0x3867, 0x07},
> + {0x3868, 0x01},
> + {0x3869, 0x01},
> + {0x386a, 0x01},
> + {0x386b, 0x01},
> + {0x386c, 0x46},
> + {0x386d, 0x08},
> + {0x386e, 0x7b},
> + {0x3871, 0x01},
> + {0x3872, 0x01},
> + {0x3873, 0x01},
> + {0x3874, 0x01},
> + {0x3880, 0x00},
> + {0x3881, 0x00},
> + {0x3882, 0x00},
> + {0x3883, 0x00},
> + {0x3884, 0x00},
> + {0x3885, 0x00},
> + {0x3886, 0x00},
> + {0x3887, 0x00},
> + {0x3888, 0x00},
> + {0x3889, 0x00},
> + {0x3900, 0x13},
> + {0x3901, 0x19},
> + {0x3902, 0x05},
> + {0x3903, 0x00},
> + {0x3904, 0x00},
> + {0x3908, 0x00},
> + {0x3909, 0x18},
> + {0x390a, 0x00},
> + {0x390b, 0x11},
> + {0x390c, 0x15},
> + {0x390d, 0x84},
> + {0x390f, 0x88},
> + {0x3910, 0x00},
> + {0x3911, 0x00},
> + {0x3912, 0x03},
> + {0x3913, 0x62},
> + {0x3914, 0x00},
> + {0x3915, 0x06},
> + {0x3916, 0x0c},
> + {0x3917, 0x81},
> + {0x3918, 0xc8},
> + {0x3919, 0x94},
> + {0x391a, 0x17},
> + {0x391b, 0x05},
> + {0x391c, 0x81},
> + {0x391d, 0x05},
> + {0x391e, 0x81},
> + {0x391f, 0x05},
> + {0x3920, 0x81},
> + {0x3921, 0x14},
> + {0x3922, 0x0b},
> + {0x3929, 0x00},
> + {0x392a, 0x00},
> + {0x392b, 0xc8},
> + {0x392c, 0x81},
> + {0x392f, 0x00},
> + {0x3930, 0x00},
> + {0x3931, 0x00},
> + {0x3932, 0x00},
> + {0x3933, 0x00},
> + {0x3934, 0x1b},
> + {0x3935, 0xc0},
> + {0x3936, 0x1c},
> + {0x3937, 0x21},
> + {0x3938, 0x0d},
> + {0x3939, 0x92},
> + {0x393a, 0x85},
> + {0x393b, 0x8a},
> + {0x393c, 0x06},
> + {0x393d, 0x8b},
> + {0x393e, 0x0f},
> + {0x393f, 0x14},
> + {0x3940, 0x0f},
> + {0x3941, 0x14},
> + {0x3945, 0xc0},
> + {0x3946, 0x05},
> + {0x3947, 0xc0},
> + {0x3948, 0x01},
> + {0x3949, 0x00},
> + {0x394a, 0x00},
> + {0x394b, 0x0b},
> + {0x394c, 0x0c},
> + {0x394d, 0x0b},
> + {0x394e, 0x09},
> + {0x3951, 0xc7},
> + {0x3952, 0x0f},
> + {0x3953, 0x0f},
> + {0x3954, 0x0f},
> + {0x3955, 0x00},
> + {0x3956, 0x27},
> + {0x3957, 0x27},
> + {0x3958, 0x27},
> + {0x3959, 0x01},
> + {0x395a, 0x02},
> + {0x395b, 0x14},
> + {0x395c, 0x36},
> + {0x395e, 0xc0},
> + {0x3964, 0x55},
> + {0x3965, 0x55},
> + {0x3966, 0x88},
> + {0x3967, 0x88},
> + {0x3968, 0x66},
> + {0x3969, 0x66},
> + {0x396d, 0x80},
> + {0x396e, 0xff},
> + {0x396f, 0x10},
> + {0x3970, 0x80},
> + {0x3971, 0x80},
> + {0x3972, 0x00},
> + {0x397a, 0x55},
> + {0x397b, 0x10},
> + {0x397c, 0x10},
> + {0x397d, 0x10},
> + {0x397e, 0x10},
> + {0x3980, 0xfc},
> + {0x3981, 0xfc},
> + {0x3982, 0x66},
> + {0x3983, 0xfc},
> + {0x3984, 0xfc},
> + {0x3985, 0x66},
> + {0x3986, 0x00},
> + {0x3987, 0x00},
> + {0x3988, 0x00},
> + {0x3989, 0x00},
> + {0x398a, 0x00},
> + {0x398b, 0x00},
> + {0x398c, 0x00},
> + {0x398d, 0x00},
> + {0x398e, 0x00},
> + {0x398f, 0x00},
> + {0x3990, 0x00},
> + {0x3991, 0x00},
> + {0x3992, 0x00},
> + {0x3993, 0x00},
> + {0x3994, 0x00},
> + {0x3995, 0x00},
> + {0x3996, 0x00},
> + {0x3997, 0x0f},
> + {0x3998, 0x0c},
> + {0x3999, 0x0c},
> + {0x399a, 0x0c},
> + {0x399b, 0xf0},
> + {0x399c, 0x14},
> + {0x399d, 0x0d},
> + {0x399e, 0x00},
> + {0x399f, 0x0c},
> + {0x39a0, 0x0c},
> + {0x39a1, 0x0c},
> + {0x39a2, 0x00},
> + {0x39a3, 0x0f},
> + {0x39a4, 0x0c},
> + {0x39a5, 0x0c},
> + {0x39a6, 0x0c},
> + {0x39a7, 0x0c},
> + {0x39a8, 0x0f},
> + {0x39a9, 0xff},
> + {0x39aa, 0xbf},
> + {0x39ab, 0x3f},
> + {0x39ac, 0x7e},
> + {0x39ad, 0xff},
> + {0x39ae, 0x00},
> + {0x39af, 0x00},
> + {0x39b0, 0x00},
> + {0x39b1, 0x00},
> + {0x39b2, 0x00},
> + {0x39b3, 0x00},
> + {0x39b4, 0x00},
> + {0x39b5, 0x00},
> + {0x39b6, 0x00},
> + {0x39b7, 0x00},
> + {0x39b8, 0x00},
> + {0x39b9, 0x00},
> + {0x39ba, 0x00},
> + {0x39bb, 0x00},
> + {0x39bc, 0x00},
> + {0x39c2, 0x00},
> + {0x39c3, 0x00},
> + {0x39c4, 0x00},
> + {0x39c5, 0x00},
> + {0x39c7, 0x00},
> + {0x39c8, 0x00},
> + {0x39c9, 0x00},
> + {0x39ca, 0x01},
> + {0x39cb, 0x00},
> + {0x39cc, 0x85},
> + {0x39cd, 0x09},
> + {0x39cf, 0x04},
> + {0x39d0, 0x85},
> + {0x39d1, 0x09},
> + {0x39d2, 0x04},
> + {0x39d4, 0x02},
> + {0x39d5, 0x0e},
> + {0x39db, 0x00},
> + {0x39dc, 0x01},
> + {0x39dd, 0x0c},
> + {0x39e5, 0xff},
> + {0x39e6, 0xff},
> + {0x39fa, 0x38},
> + {0x39fb, 0x07},
> + {0x39ff, 0x00},
> + {0x3a05, 0x00},
> + {0x3a06, 0x07},
> + {0x3a07, 0x0d},
> + {0x3a08, 0x08},
> + {0x3a09, 0xb2},
> + {0x3a0a, 0x0a},
> + {0x3a0b, 0x3c},
> + {0x3a0c, 0x0b},
> + {0x3a0d, 0xe1},
> + {0x3a0e, 0x03},
> + {0x3a0f, 0x85},
> + {0x3a10, 0x0b},
> + {0x3a11, 0xff},
> + {0x3a12, 0x00},
> + {0x3a13, 0x01},
> + {0x3a14, 0x0c},
> + {0x3a15, 0x04},
> + {0x3a17, 0x09},
> + {0x3a18, 0x20},
> + {0x3a19, 0x09},
> + {0x3a1a, 0x9d},
> + {0x3a1b, 0x09},
> + {0x3a1e, 0x34},
> + {0x3a1f, 0x09},
> + {0x3a20, 0x89},
> + {0x3a21, 0x09},
> + {0x3a48, 0xbe},
> + {0x3a52, 0x00},
> + {0x3a53, 0x01},
> + {0x3a54, 0x0c},
> + {0x3a55, 0x04},
> + {0x3a58, 0x0c},
> + {0x3a59, 0x04},
> + {0x3a5a, 0x01},
> + {0x3a5b, 0x00},
> + {0x3a5c, 0x01},
> + {0x3a5d, 0xe8},
> + {0x3a62, 0x03},
> + {0x3a63, 0x86},
> + {0x3a64, 0x0b},
> + {0x3a65, 0xbe},
> + {0x3a6a, 0xdc},
> + {0x3a6b, 0x0b},
> + {0x3a6c, 0x1a},
> + {0x3a6d, 0x06},
> + {0x3a6e, 0x01},
> + {0x3a6f, 0x04},
> + {0x3a70, 0xdc},
> + {0x3a71, 0x0b},
> + {0x3a83, 0x10},
> + {0x3a84, 0x00},
> + {0x3a85, 0x08},
> + {0x3a87, 0x00},
> + {0x3a88, 0x6b},
> + {0x3a89, 0x01},
> + {0x3a8a, 0x53},
> + {0x3a8f, 0x00},
> + {0x3a90, 0x00},
> + {0x3a91, 0x00},
> + {0x3a92, 0x00},
> + {0x3a93, 0x60},
> + {0x3a94, 0xea},
> + {0x3a98, 0x00},
> + {0x3a99, 0x31},
> + {0x3a9a, 0x01},
> + {0x3a9b, 0x04},
> + {0x3a9c, 0xdc},
> + {0x3a9d, 0x0b},
> + {0x3aa4, 0x0f},
> + {0x3aad, 0x00},
> + {0x3aae, 0x3e},
> + {0x3aaf, 0x02},
> + {0x3ab0, 0x77},
> + {0x3ab2, 0x00},
> + {0x3ab3, 0x08},
> + {0x3ab6, 0x0b},
> + {0x3ab7, 0xff},
> + {0x3aba, 0x0b},
> + {0x3abb, 0xfa},
> + {0x3abd, 0x05},
> + {0x3abe, 0x09},
> + {0x3abf, 0x1e},
> + {0x3ac0, 0x00},
> + {0x3ac1, 0x63},
> + {0x3ac2, 0x01},
> + {0x3ac3, 0x55},
> + {0x3ac8, 0x00},
> + {0x3ac9, 0x2a},
> + {0x3aca, 0x01},
> + {0x3acb, 0x36},
> + {0x3acc, 0x00},
> + {0x3acd, 0x6f},
> + {0x3ad0, 0x00},
> + {0x3ad1, 0x79},
> + {0x3ad2, 0x02},
> + {0x3ad3, 0x59},
> + {0x3ad4, 0x06},
> + {0x3ad5, 0x5a},
> + {0x3ad6, 0x08},
> + {0x3ad7, 0x3a},
> + {0x3ad8, 0x00},
> + {0x3ad9, 0x79},
> + {0x3ada, 0x02},
> + {0x3adb, 0x59},
> + {0x3adc, 0x09},
> + {0x3add, 0x89},
> + {0x3ade, 0x0b},
> + {0x3adf, 0x69},
> + {0x3ae0, 0x03},
> + {0x3ae1, 0xc1},
> + {0x3ae2, 0x0b},
> + {0x3ae3, 0xaf},
> + {0x3ae4, 0x00},
> + {0x3ae5, 0x3e},
> + {0x3ae6, 0x02},
> + {0x3ae7, 0x77},
> + {0x3ae8, 0x00},
> + {0x3aea, 0x0b},
> + {0x3aeb, 0xbe},
> + {0x3aee, 0x08},
> + {0x3aef, 0x80},
> + {0x3af0, 0x09},
> + {0x3af1, 0x70},
> + {0x3af2, 0x08},
> + {0x3af3, 0x94},
> + {0x3af4, 0x09},
> + {0x3af5, 0x5c},
> + {0x3af6, 0x03},
> + {0x3af7, 0x85},
> + {0x3af8, 0x08},
> + {0x3af9, 0x80},
> + {0x3afa, 0x0b},
> + {0x3afb, 0xaf},
> + {0x3afc, 0x01},
> + {0x3afd, 0x5a},
> + {0x3b1e, 0x00},
> + {0x3b20, 0xa5},
> + {0x3b21, 0x00},
> + {0x3b22, 0x00},
> + {0x3b23, 0x00},
> + {0x3b24, 0x05},
> + {0x3b25, 0x00},
> + {0x3b26, 0x00},
> + {0x3b27, 0x00},
> + {0x3b28, 0x1a},
> + {0x3b2f, 0x40},
> + {0x3b40, 0x08},
> + {0x3b41, 0x70},
> + {0x3b42, 0x05},
> + {0x3b43, 0xf0},
> + {0x3b44, 0x01},
> + {0x3b45, 0x54},
> + {0x3b46, 0x01},
> + {0x3b47, 0x54},
> + {0x3b56, 0x08},
> + {0x3b80, 0x00},
> + {0x3b81, 0x00},
> + {0x3b82, 0x64},
> + {0x3b83, 0x00},
> + {0x3b84, 0x00},
> + {0x3b85, 0x64},
> + {0x3b9d, 0x61},
> + {0x3ba8, 0x38},
> + {0x3c11, 0x33},
> + {0x3c12, 0x3d},
> + {0x3c13, 0x00},
> + {0x3c14, 0xbe},
> + {0x3c15, 0x0b},
> + {0x3c16, 0xa8},
> + {0x3c17, 0x03},
> + {0x3c18, 0x9c},
> + {0x3c19, 0x0b},
> + {0x3c1a, 0x0f},
> + {0x3c1b, 0x97},
> + {0x3c1c, 0x00},
> + {0x3c1d, 0x3c},
> + {0x3c1e, 0x02},
> + {0x3c1f, 0x78},
> + {0x3c20, 0x06},
> + {0x3c21, 0x80},
> + {0x3c22, 0x08},
> + {0x3c23, 0x0f},
> + {0x3c24, 0x97},
> + {0x3c25, 0x00},
> + {0x3c26, 0x3c},
> + {0x3c27, 0x02},
> + {0x3c28, 0xa7},
> + {0x3c29, 0x09},
> + {0x3c2a, 0xaf},
> + {0x3c2b, 0x0b},
> + {0x3c2c, 0x38},
> + {0x3c2d, 0xf9},
> + {0x3c2e, 0x0b},
> + {0x3c2f, 0xfd},
> + {0x3c30, 0x05},
> + {0x3c35, 0x8c},
> + {0x3c3e, 0xc3},
> + {0x3c43, 0xcb},
> + {0x3c44, 0x00},
> + {0x3c45, 0xff},
> + {0x3c46, 0x0b},
> + {0x3c48, 0x3b},
> + {0x3c49, 0x40},
> + {0x3c4a, 0x00},
> + {0x3c4b, 0x5b},
> + {0x3c4c, 0x02},
> + {0x3c4d, 0x02},
> + {0x3c4e, 0x00},
> + {0x3c4f, 0x04},
> + {0x3c50, 0x0c},
> + {0x3c51, 0x00},
> + {0x3c52, 0x3b},
> + {0x3c53, 0x3a},
> + {0x3c54, 0x07},
> + {0x3c55, 0x9e},
> + {0x3c56, 0x07},
> + {0x3c57, 0x9e},
> + {0x3c58, 0x07},
> + {0x3c59, 0xe8},
> + {0x3c5a, 0x03},
> + {0x3c5b, 0x33},
> + {0x3c5c, 0xa8},
> + {0x3c5d, 0x07},
> + {0x3c5e, 0xd0},
> + {0x3c5f, 0x07},
> + {0x3c60, 0x32},
> + {0x3c61, 0x00},
> + {0x3c62, 0xd0},
> + {0x3c63, 0x07},
> + {0x3c64, 0x80},
> + {0x3c65, 0x80},
> + {0x3c66, 0x3f},
> + {0x3c67, 0x01},
> + {0x3c68, 0x00},
> + {0x3c69, 0xd0},
> + {0x3c6a, 0x07},
> + {0x3c6b, 0x01},
> + {0x3c6c, 0x00},
> + {0x3c6d, 0xcd},
> + {0x3c6e, 0x07},
> + {0x3c6f, 0xd1},
> + {0x3c70, 0x07},
> + {0x3c71, 0x01},
> + {0x3c72, 0x00},
> + {0x3c73, 0xc3},
> + {0x3c74, 0x01},
> + {0x3c75, 0x00},
> + {0x3c76, 0xcd},
> + {0x3c77, 0x07},
> + {0x3c78, 0xea},
> + {0x3c79, 0x03},
> + {0x3c7a, 0xcd},
> + {0x3c7b, 0x07},
> + {0x3c7c, 0x08},
> + {0x3c7d, 0x06},
> + {0x3c7e, 0x03},
> + {0x3c85, 0x3a},
> + {0x3c86, 0x08},
> + {0x3c87, 0x69},
> + {0x3c88, 0x0b},
> + {0x3c8f, 0xb2},
> + {0x3c90, 0x08},
> + {0x3c91, 0xe1},
> + {0x3c92, 0x0b},
> + {0x3c93, 0x06},
> + {0x3c94, 0x03},
> + {0x3c9b, 0x35},
> + {0x3c9c, 0x08},
> + {0x3c9d, 0x64},
> + {0x3c9e, 0x0b},
> + {0x3ca5, 0xb7},
> + {0x3ca6, 0x08},
> + {0x3ca7, 0xe6},
> + {0x3ca8, 0x0b},
> + {0x3ca9, 0x83},
> + {0x3caa, 0x3c},
> + {0x3cab, 0x01},
> + {0x3cac, 0x00},
> + {0x3cad, 0x9e},
> + {0x3cae, 0x07},
> + {0x3caf, 0x85},
> + {0x3cb0, 0x03},
> + {0x3cb1, 0xbc},
> + {0x3cb2, 0x0b},
> + {0x3cb7, 0x3c},
> + {0x3cb8, 0x01},
> + {0x3cb9, 0x00},
> + {0x3cba, 0xbc},
> + {0x3cbb, 0x07},
> + {0x3cbc, 0xa3},
> + {0x3cbd, 0x03},
> + {0x3cbe, 0x9e},
> + {0x3cbf, 0x0b},
> + {0x3cc4, 0x66},
> + {0x3cc5, 0xe6},
> + {0x3cc6, 0x99},
> + {0x3cc7, 0xe9},
> + {0x3cc8, 0x33},
> + {0x3cc9, 0x03},
> + {0x3cca, 0x33},
> + {0x3ccb, 0x03},
> + {0x3cce, 0x66},
> + {0x3ccf, 0x66},
> + {0x3cd0, 0x00},
> + {0x3cd1, 0x04},
> + {0x3cd2, 0xf4},
> + {0x3cd3, 0xb7},
> + {0x3cd4, 0x03},
> + {0x3cd5, 0x10},
> + {0x3cd6, 0x06},
> + {0x3cd7, 0x30},
> + {0x3cd8, 0x08},
> + {0x3cd9, 0x5f},
> + {0x3cda, 0x0b},
> + {0x3cdd, 0x88},
> + {0x3cde, 0x88},
> + {0x3cdf, 0x08},
> + {0x3ce0, 0x00},
> + {0x3ce1, 0x00},
> + {0x3ce3, 0x00},
> + {0x3ce4, 0x00},
> + {0x3ce5, 0x00},
> + {0x3ce6, 0x00},
> + {0x3ce7, 0x00},
> + {0x3ce8, 0x00},
> + {0x3ce9, 0x00},
> + {0x3cea, 0x00},
> + {0x3ceb, 0x00},
> + {0x3cec, 0x00},
> + {0x3ced, 0x00},
> + {0x3cee, 0x00},
> + {0x3cef, 0x85},
> + {0x3cf0, 0x03},
> + {0x3cf1, 0xaf},
> + {0x3cf2, 0x0b},
> + {0x3cf3, 0x03},
> + {0x3cf4, 0x2c},
> + {0x3cf5, 0x00},
> + {0x3cf6, 0x42},
> + {0x3cf7, 0x00},
> + {0x3cf8, 0x03},
> + {0x3cf9, 0x2c},
> + {0x3cfa, 0x00},
> + {0x3cfb, 0x42},
> + {0x3cfc, 0x00},
> + {0x3cfd, 0x03},
> + {0x3cfe, 0x01},
> + {0x3d81, 0x00},
> + {0x3e94, 0x0f},
> + {0x3e95, 0x5f},
> + {0x3e96, 0x02},
> + {0x3e97, 0x3c},
> + {0x3e98, 0x00},
> + {0x3e9f, 0x00},
> + {0x3f00, 0x00},
> + {0x3f05, 0x03},
> + {0x3f07, 0x01},
> + {0x3f08, 0x55},
> + {0x3f09, 0x25},
> + {0x3f0a, 0x35},
> + {0x3f0b, 0x20},
> + {0x3f11, 0x05},
> + {0x3f12, 0x05},
> + {0x3f40, 0x00},
> + {0x3f41, 0x03},
> + {0x3f43, 0x10},
> + {0x3f44, 0x02},
> + {0x3f45, 0xe6},
> + {0x4000, 0xf9},
> + {0x4001, 0x2b},
> + {0x4008, 0x04},
> + {0x4009, 0x1b},
> + {0x400a, 0x03},
> + {0x400e, 0x10},
> + {0x4010, 0x04},
> + {0x4011, 0xf7},
> + {0x4032, 0x3e},
> + {0x4033, 0x02},
> + {0x4050, 0x02},
> + {0x4051, 0x0d},
> + {0x40b0, 0x0f},
> + {0x40f9, 0x00},
> + {0x4200, 0x00},
> + {0x4204, 0x00},
> + {0x4205, 0x00},
> + {0x4206, 0x00},
> + {0x4207, 0x00},
> + {0x4208, 0x00},
> + {0x4244, 0x00},
> + {0x4300, 0x00},
> + {0x4301, 0xff},
> + {0x4302, 0xf0},
> + {0x4303, 0x00},
> + {0x4304, 0xff},
> + {0x4305, 0xf0},
> + {0x4306, 0x00},
> + {0x4307, 0x06},
> + {0x4308, 0x00},
> + {0x430a, 0x90}, /* reset 0x10 emb_dt */
> + {0x430b, 0x11},
> + {0x4310, 0x00},
> + {0x4316, 0x00},
> + {0x431c, 0x00},
> + {0x431e, 0x00},
> + {0x431f, 0x0a},
> + {0x4320, 0x20},
> + {0x4410, 0x08},
> + {0x4433, 0x08},
> + {0x4434, 0xf8},
> + {0x4508, 0x80},
> + {0x4509, 0x10},
> + {0x450b, 0x83},
> + {0x4511, 0x00},
> + {0x4580, 0x09},
> + {0x4587, 0x00},
> + {0x458c, 0x00},
> + {0x4640, 0x00},
> + {0x4641, 0xc1},
> + {0x4642, 0x00},
> + {0x4643, 0x00},
> + {0x4649, 0x00},
> + {0x4681, 0x04},
> + {0x4682, 0x10},
> + {0x4683, 0xa0},
> + {0x4698, 0x07},
> + {0x4699, 0xf0},
> + {0x4700, 0xe0},
> + {0x4710, 0x00},
> + {0x4718, 0x04},
> + {0x4802, 0x00}, /* MIPI_CORE_REG00 */
> + {0x481b, 0x3c}, /* MIPI_CORE_REG1B */
> + {0x4837, 0x19}, /* MIPI_CORE_REG37 pclk_period[7:0] */
> + {0x4860, 0x00},
> + {0x4883, 0x00},
> + {0x4884, 0x09},
> + {0x4885, 0x80},
> + {0x4886, 0x00},
> + {0x4888, 0x10},
> + {0x488b, 0x00},
> + {0x488c, 0x10},
> + {0x4980, 0x03},
> + {0x4981, 0x06},
> + {0x4984, 0x00},
> + {0x4985, 0x00},
> + {0x4a14, 0x04},
> + {0x4b01, 0x44},
> + {0x4b03, 0x80},
> + {0x4d06, 0xc8},
> + {0x4d09, 0xdf},
> + {0x4d12, 0x80},
> + {0x4d15, 0x7d},
> + {0x4d34, 0x7d},
> + {0x4d3c, 0x7d},
> + {0x4d5a, 0x14},
> + {0x4e03, 0x06},
> + {0x4e04, 0xb9},
> + {0x4e05, 0x08},
> + {0x4e06, 0x36},
> + {0x4e07, 0x04},
> + {0x4e08, 0x52},
> + {0x4e09, 0x05},
> + {0x4e0a, 0x47},
> + {0x4e0b, 0x02},
> + {0x4e0c, 0xe2},
> + {0x4e0d, 0x03},
> + {0x4e0e, 0x85},
> + {0x4e18, 0xf3},
> + {0x4e19, 0x0f},
> + {0x4e1b, 0x08},
> + {0x4e1c, 0x04},
> + {0x4f00, 0x7f},
> + {0x4f01, 0xff},
> + {0x4f03, 0x00},
> + {0x4f04, 0x18},
> + {0x4f05, 0x13},
> + {0x5000, 0x6e},
> + {0x5001, 0x00},
> + {0x500a, 0x00},
> + {0x5080, 0x00},
> + {0x5081, 0x00},
> + {0x5082, 0x00},
> + {0x5083, 0x00},
> + {0x5100, 0x00},
> + {0x5103, 0x00},
> + {0x5180, 0x70},
> + {0x5181, 0x70},
> + {0x5182, 0x73},
> + {0x5183, 0xff},
> + {0x5240, 0x73},
> + {0x5249, 0x06},
> + {0x524a, 0x44},
> + {0x524b, 0x44},
> + {0x524c, 0x44},
> + {0x524e, 0x66},
> + {0x524f, 0x06},
> + {0x5250, 0x00},
> + {0x5281, 0x18},
> + {0x5282, 0x08},
> + {0x5283, 0x08},
> + {0x5284, 0x18},
> + {0x5285, 0x18},
> + {0x5286, 0x08},
> + {0x5287, 0x08},
> + {0x5288, 0x18},
> + {0x5289, 0x2d},
> + {0x6000, 0x40},
> + {0x6001, 0x40},
> + {0x6002, 0x00},
> + {0x6003, 0x00},
> + {0x6004, 0x00},
> + {0x6005, 0x00},
> + {0x6006, 0x00},
> + {0x6007, 0x00},
> + {0x6008, 0x00},
> + {0x6009, 0x00},
> + {0x600a, 0x00},
> + {0x600b, 0x00},
> + {0x600c, 0x02},
> + {0x600d, 0x00},
> + {0x600e, 0x04},
> + {0x600f, 0x00},
> + {0x6010, 0x06},
> + {0x6011, 0x00},
> + {0x6012, 0x00},
> + {0x6013, 0x00},
> + {0x6014, 0x02},
> + {0x6015, 0x00},
> + {0x6016, 0x04},
> + {0x6017, 0x00},
> + {0x6018, 0x06},
> + {0x6019, 0x00},
> + {0x601a, 0x01},
> + {0x601b, 0x00},
> + {0x601c, 0x01},
> + {0x601d, 0x00},
> + {0x601e, 0x01},
> + {0x601f, 0x00},
> + {0x6020, 0x01},
> + {0x6021, 0x00},
> + {0x6022, 0x01},
> + {0x6023, 0x00},
> + {0x6024, 0x01},
> + {0x6025, 0x00},
> + {0x6026, 0x01},
> + {0x6027, 0x00},
> + {0x6028, 0x01},
> + {0x6029, 0x00},
> +
> + {0x3501, 0x08},
> + {0x3502, 0x32},
> +
> + /* PLL 6G */
> + {0x0307, 0x01}, /* pll1_divm */
> + {0x304a, 0x03},
> + {0x4837, 0x10}, /* MIPI_CORE_REG37 pclk_period[7:0] */
> +
> + /* Ficosa specific */
What's Ficosa ?
> + {0x3503, 0xa8}, /* AEC enable */
> + {0x3501, 0x00}, /* AEC expusure time 0x3501, 0x3502 */
> + {0x3502, 0x40},
> + {0x3508, 0x01}, /* AEC gain 0x3508, 0x3509 */
> + {0x3509, 0x00},
> + {0x3002, 0x6f}, /* I/O */ /* SC_CMMN_REG02 io_pad_oen[7:0] */
> + {0x3005, 0x6a}, /* SC_CMMN_REG05 io_pad_out[7:0] */
> + {0x3008, 0x6a}, /* SC_CMMN_REG08 io_pad_sel[7:0] */
> + {0x3b20, 0xff}, /* Strobe */ /* STOBE_REG20 stobe_pattern[7:0] */
> + {0x3a9f, 0x08}, /* GLOBAL_SHUTTER_REG9F */
> + {0x3aa0, 0x00}, /* GLOBAL_SHUTTER_REGA0 */
> + {0x3aa1, 0x00}, /* GLOBAL_SHUTTER_REGA1 */
> + {0x3b21, 0x00},
> + {0x3b22, 0x00},
> + {0x3b23, 0x00},
> + {0x3b24, 0x00},
> + {0x3b25, 0x00},
> + {0x3b26, 0x00},
> + {0x3b27, 0x00},
> + {0x3b28, 0x10},
> + {0x3b2f, 0x4a},
> + {0x3b2d, 0x01},
> + {0x3b2e, 0x78},
> + {0x3b1e, 0x01},
> + {0x3b1f, 0x05},
> +
> + {0x4e04, 0x06},
> + {0x4e04, 0xee},
> + {0x4e05, 0x08},
> + {0x4e06, 0x88},
> + {0x4e07, 0x04},
> + {0x4e08, 0x0d},
> + {0x4e09, 0x09},
> + {0x4e0a, 0xae},
> + {0x4e0b, 0x02},
> + {0x4e0c, 0x44},
> + {0x4e0d, 0x03},
> + {0x4e0e, 0x55},
> + { /* sentinel*/ },
> +};
> +
> +struct ox05b1s_reglist ox05b1s_reglist_2592x1944[] = {
> + {
> + .regs = ovx5b_init_setting_2592x1944
> + }, {
> + /* sentinel */
> + }
> +};
--
Regards,
Laurent Pinchart
