> Am 21.11.2024 um 11:52 schrieb H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>: > > Seems to be a 30 pin and called J17. Schematics fortunately > shows pin assignment of an up to 4 lane CSI camera: > > https://web.archive.org/web/20161024203005/http://pandaboard.org/sites/default/files/board_reference/pandaboard-es-b/panda-es-b-schematic.pdf > > And there are some gpios for control. I just had the inspiration to look into the OMAP5 EVM schematics. It has a connector J2 with the same pin assignment for a camera module. Just using a diffferent FREFCLK number and different gpios. Therefore, a camera for the Panda(ES) should also work on the OMAP5 EVM. AFAIK the ISS hardware and required driver is also the same betweeen omap4 and omap5. > But no documentation about the connector or the adapter board for a Well, in the EVM schematics it is marked "111-1003200" and I could not find that. But the reference guide (SWCU130) says: Samtec TFM-115-32-S-D-A This looks from a photo like the one populated on the OMAP5 EVM. So we at least know now, which connector to add to a PandaBoard. BR, Nikolaus
