Since GCE has been moved to mminfra in MT8196, all transactions from
mminfra to DRAM will have their addresses adjusted by subtracting a
mminfra offset.
This information should be handled inside the CMDQ driver, allowing
CMDQ users to call CMDQ APIs as usual.
Therefore, CMDQ driver needs to use the mbox API to get the
mminfra_offset value of the SoC, and then add it to the DRAM address
when generating instructions to ensure GCE accesses the correct DRAM
address.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@xxxxxxxxxxxx>
---
drivers/soc/mediatek/mtk-cmdq-helper.c | 43 +++++++++++++++++++++++++-
1 file changed, 42 insertions(+), 1 deletion(-)
diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index ffdf3cecf6fe..bd2aa9152afc 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -222,6 +222,9 @@ int cmdq_pkt_write(struct cmdq_pkt *pkt, u8 subsys, u32 pa_base, u16 offset, u32
if (cmdq_subsys_is_valid(cl->chan, subsys)) {
err = cmdq_pkt_append_command(pkt, inst);
} else {
+ if (cmdq_addr_need_offset(cl->chan, pa_base))
+ pa_base += cmdq_get_offset_pa(cl->chan);
+
err = cmdq_pkt_assign(pkt, 0, CMDQ_ADDR_HIGH(pa_base));
if (err < 0)
return err;
@@ -255,12 +258,16 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys, u32 pa_base,
}
err = cmdq_pkt_write(pkt, subsys, pa_base, offset_mask, value);
} else {
+ if (cmdq_addr_need_offset(cl->chan, pa_base))
+ pa_base += cmdq_get_offset_pa(cl->chan);
+
err = cmdq_pkt_assign(pkt, 0, CMDQ_ADDR_HIGH(pa_base));
if (err < 0)
return err;
err = cmdq_pkt_write_s_mask_value(pkt, 0, CMDQ_ADDR_LOW(offset), value, mask);
}
+
return err;
}
EXPORT_SYMBOL(cmdq_pkt_write_mask);
@@ -347,10 +354,22 @@ EXPORT_SYMBOL(cmdq_pkt_write_s_mask_value);
int cmdq_pkt_mem_move(struct cmdq_pkt *pkt, dma_addr_t src_addr, dma_addr_t dst_addr)
{
+ struct cmdq_client *cl = (struct cmdq_client *)pkt->cl;
const u16 high_addr_reg_idx = CMDQ_THR_SPR_IDX0;
const u16 value_reg_idx = CMDQ_THR_SPR_IDX1;
int ret;
+ if (!cl) {
+ pr_err("%s %d: pkt->cl is NULL!\n", __func__, __LINE__);
+ return -EINVAL;
+ }
+
+ if (cmdq_addr_need_offset(cl->chan, src_addr))
+ src_addr += cmdq_get_offset_pa(cl->chan);
+
+ if (cmdq_addr_need_offset(cl->chan, dst_addr))
+ dst_addr += cmdq_get_offset_pa(cl->chan);
+
/* read the value of src_addr into high_addr_reg_idx */
ret = cmdq_pkt_assign(pkt, high_addr_reg_idx, CMDQ_ADDR_HIGH(src_addr));
if (ret < 0)
@@ -450,6 +469,9 @@ int cmdq_pkt_poll(struct cmdq_pkt *pkt, u8 subsys, u32 pa_base,
}
if (!cmdq_subsys_is_valid(cl->chan, subsys)) {
+ if (cmdq_addr_need_offset(cl->chan, pa_base))
+ pa_base += cmdq_get_offset_pa(cl->chan);
+
err = cmdq_pkt_assign(pkt, CMDQ_POLL_ADDR_GPR, pa_base);
if (err < 0)
return err;
@@ -480,10 +502,19 @@ EXPORT_SYMBOL(cmdq_pkt_poll_mask);
int cmdq_pkt_poll_addr(struct cmdq_pkt *pkt, dma_addr_t addr, u32 value, u32 mask)
{
+ struct cmdq_client *cl = (struct cmdq_client *)pkt->cl;
struct cmdq_instruction inst = { {0} };
u8 use_mask = 0;
int ret;
+ if (!cl) {
+ pr_err("%s %d: pkt->cl is NULL!\n", __func__, __LINE__);
+ return -EINVAL;
+ }
+
+ if (cmdq_addr_need_offset(cl->chan, addr))
+ addr += cmdq_get_offset_pa(cl->chan);
+
/*
* Append an MASK instruction to set the mask for following POLL instruction
* which enables use_mask bit.
@@ -561,11 +592,21 @@ EXPORT_SYMBOL(cmdq_pkt_assign);
int cmdq_pkt_jump_abs(struct cmdq_pkt *pkt, dma_addr_t addr, u8 shift_pa)
{
+ struct cmdq_client *cl = (struct cmdq_client *)pkt->cl;
struct cmdq_instruction inst = {
.op = CMDQ_CODE_JUMP,
.offset = CMDQ_JUMP_ABSOLUTE,
- .value = addr >> shift_pa
};
+
+ if (!cl) {
+ pr_err("%s %d: pkt->cl is NULL!\n", __func__, __LINE__);
+ return -EINVAL;
+ }
+
+ if (cmdq_addr_need_offset(cl->chan, addr))
+ addr += cmdq_get_offset_pa(cl->chan);
+
+ inst.value = addr >> shift_pa;
return cmdq_pkt_append_command(pkt, inst);
}
EXPORT_SYMBOL(cmdq_pkt_jump_abs);
--
2.43.0
