Re: [PATCH] media: i2c: imx412: Add missing newline to prints

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon Nov 18, 2024 at 10:45 PM CET, Luca Weiss wrote:
> Add trailing \n to dev_dbg and dev_err prints where missing.
>

Forgot to add:

Fixes: 9214e86c0cc1 ("media: i2c: Add imx412 camera sensor driver")
Cc: stable@xxxxxxxxxxxxxxx

> Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
> ---
>  drivers/media/i2c/imx412.c | 42 +++++++++++++++++++++---------------------
>  1 file changed, 21 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/media/i2c/imx412.c b/drivers/media/i2c/imx412.c
> index 0bfe3046fcc8726ef4e484d0fbf980422343fccc..c74097a59c42853ff2a1b600f28ff5aacedb1c6b 100644
> --- a/drivers/media/i2c/imx412.c
> +++ b/drivers/media/i2c/imx412.c
> @@ -547,7 +547,7 @@ static int imx412_update_exp_gain(struct imx412 *imx412, u32 exposure, u32 gain)
>  
>  	lpfr = imx412->vblank + imx412->cur_mode->height;
>  
> -	dev_dbg(imx412->dev, "Set exp %u, analog gain %u, lpfr %u",
> +	dev_dbg(imx412->dev, "Set exp %u, analog gain %u, lpfr %u\n",
>  		exposure, gain, lpfr);
>  
>  	ret = imx412_write_reg(imx412, IMX412_REG_HOLD, 1, 1);
> @@ -594,7 +594,7 @@ static int imx412_set_ctrl(struct v4l2_ctrl *ctrl)
>  	case V4L2_CID_VBLANK:
>  		imx412->vblank = imx412->vblank_ctrl->val;
>  
> -		dev_dbg(imx412->dev, "Received vblank %u, new lpfr %u",
> +		dev_dbg(imx412->dev, "Received vblank %u, new lpfr %u\n",
>  			imx412->vblank,
>  			imx412->vblank + imx412->cur_mode->height);
>  
> @@ -613,7 +613,7 @@ static int imx412_set_ctrl(struct v4l2_ctrl *ctrl)
>  		exposure = ctrl->val;
>  		analog_gain = imx412->again_ctrl->val;
>  
> -		dev_dbg(imx412->dev, "Received exp %u, analog gain %u",
> +		dev_dbg(imx412->dev, "Received exp %u, analog gain %u\n",
>  			exposure, analog_gain);
>  
>  		ret = imx412_update_exp_gain(imx412, exposure, analog_gain);
> @@ -622,7 +622,7 @@ static int imx412_set_ctrl(struct v4l2_ctrl *ctrl)
>  
>  		break;
>  	default:
> -		dev_err(imx412->dev, "Invalid control %d", ctrl->id);
> +		dev_err(imx412->dev, "Invalid control %d\n", ctrl->id);
>  		ret = -EINVAL;
>  	}
>  
> @@ -803,14 +803,14 @@ static int imx412_start_streaming(struct imx412 *imx412)
>  	ret = imx412_write_regs(imx412, reg_list->regs,
>  				reg_list->num_of_regs);
>  	if (ret) {
> -		dev_err(imx412->dev, "fail to write initial registers");
> +		dev_err(imx412->dev, "fail to write initial registers\n");
>  		return ret;
>  	}
>  
>  	/* Setup handler will write actual exposure and gain */
>  	ret =  __v4l2_ctrl_handler_setup(imx412->sd.ctrl_handler);
>  	if (ret) {
> -		dev_err(imx412->dev, "fail to setup handler");
> +		dev_err(imx412->dev, "fail to setup handler\n");
>  		return ret;
>  	}
>  
> @@ -821,7 +821,7 @@ static int imx412_start_streaming(struct imx412 *imx412)
>  	ret = imx412_write_reg(imx412, IMX412_REG_MODE_SELECT,
>  			       1, IMX412_MODE_STREAMING);
>  	if (ret) {
> -		dev_err(imx412->dev, "fail to start streaming");
> +		dev_err(imx412->dev, "fail to start streaming\n");
>  		return ret;
>  	}
>  
> @@ -895,7 +895,7 @@ static int imx412_detect(struct imx412 *imx412)
>  		return ret;
>  
>  	if (val != IMX412_ID) {
> -		dev_err(imx412->dev, "chip id mismatch: %x!=%x",
> +		dev_err(imx412->dev, "chip id mismatch: %x!=%x\n",
>  			IMX412_ID, val);
>  		return -ENXIO;
>  	}
> @@ -927,7 +927,7 @@ static int imx412_parse_hw_config(struct imx412 *imx412)
>  	imx412->reset_gpio = devm_gpiod_get_optional(imx412->dev, "reset",
>  						     GPIOD_OUT_LOW);
>  	if (IS_ERR(imx412->reset_gpio)) {
> -		dev_err(imx412->dev, "failed to get reset gpio %ld",
> +		dev_err(imx412->dev, "failed to get reset gpio %ld\n",
>  			PTR_ERR(imx412->reset_gpio));
>  		return PTR_ERR(imx412->reset_gpio);
>  	}
> @@ -935,13 +935,13 @@ static int imx412_parse_hw_config(struct imx412 *imx412)
>  	/* Get sensor input clock */
>  	imx412->inclk = devm_clk_get(imx412->dev, NULL);
>  	if (IS_ERR(imx412->inclk)) {
> -		dev_err(imx412->dev, "could not get inclk");
> +		dev_err(imx412->dev, "could not get inclk\n");
>  		return PTR_ERR(imx412->inclk);
>  	}
>  
>  	rate = clk_get_rate(imx412->inclk);
>  	if (rate != IMX412_INCLK_RATE) {
> -		dev_err(imx412->dev, "inclk frequency mismatch");
> +		dev_err(imx412->dev, "inclk frequency mismatch\n");
>  		return -EINVAL;
>  	}
>  
> @@ -966,14 +966,14 @@ static int imx412_parse_hw_config(struct imx412 *imx412)
>  
>  	if (bus_cfg.bus.mipi_csi2.num_data_lanes != IMX412_NUM_DATA_LANES) {
>  		dev_err(imx412->dev,
> -			"number of CSI2 data lanes %d is not supported",
> +			"number of CSI2 data lanes %d is not supported\n",
>  			bus_cfg.bus.mipi_csi2.num_data_lanes);
>  		ret = -EINVAL;
>  		goto done_endpoint_free;
>  	}
>  
>  	if (!bus_cfg.nr_of_link_frequencies) {
> -		dev_err(imx412->dev, "no link frequencies defined");
> +		dev_err(imx412->dev, "no link frequencies defined\n");
>  		ret = -EINVAL;
>  		goto done_endpoint_free;
>  	}
> @@ -1034,7 +1034,7 @@ static int imx412_power_on(struct device *dev)
>  
>  	ret = clk_prepare_enable(imx412->inclk);
>  	if (ret) {
> -		dev_err(imx412->dev, "fail to enable inclk");
> +		dev_err(imx412->dev, "fail to enable inclk\n");
>  		goto error_reset;
>  	}
>  
> @@ -1145,7 +1145,7 @@ static int imx412_init_controls(struct imx412 *imx412)
>  		imx412->hblank_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
>  
>  	if (ctrl_hdlr->error) {
> -		dev_err(imx412->dev, "control init failed: %d",
> +		dev_err(imx412->dev, "control init failed: %d\n",
>  			ctrl_hdlr->error);
>  		v4l2_ctrl_handler_free(ctrl_hdlr);
>  		return ctrl_hdlr->error;
> @@ -1183,7 +1183,7 @@ static int imx412_probe(struct i2c_client *client)
>  
>  	ret = imx412_parse_hw_config(imx412);
>  	if (ret) {
> -		dev_err(imx412->dev, "HW configuration is not supported");
> +		dev_err(imx412->dev, "HW configuration is not supported\n");
>  		return ret;
>  	}
>  
> @@ -1191,14 +1191,14 @@ static int imx412_probe(struct i2c_client *client)
>  
>  	ret = imx412_power_on(imx412->dev);
>  	if (ret) {
> -		dev_err(imx412->dev, "failed to power-on the sensor");
> +		dev_err(imx412->dev, "failed to power-on the sensor\n");
>  		goto error_mutex_destroy;
>  	}
>  
>  	/* Check module identity */
>  	ret = imx412_detect(imx412);
>  	if (ret) {
> -		dev_err(imx412->dev, "failed to find sensor: %d", ret);
> +		dev_err(imx412->dev, "failed to find sensor: %d\n", ret);
>  		goto error_power_off;
>  	}
>  
> @@ -1208,7 +1208,7 @@ static int imx412_probe(struct i2c_client *client)
>  
>  	ret = imx412_init_controls(imx412);
>  	if (ret) {
> -		dev_err(imx412->dev, "failed to init controls: %d", ret);
> +		dev_err(imx412->dev, "failed to init controls: %d\n", ret);
>  		goto error_power_off;
>  	}
>  
> @@ -1222,14 +1222,14 @@ static int imx412_probe(struct i2c_client *client)
>  	imx412->pad.flags = MEDIA_PAD_FL_SOURCE;
>  	ret = media_entity_pads_init(&imx412->sd.entity, 1, &imx412->pad);
>  	if (ret) {
> -		dev_err(imx412->dev, "failed to init entity pads: %d", ret);
> +		dev_err(imx412->dev, "failed to init entity pads: %d\n", ret);
>  		goto error_handler_free;
>  	}
>  
>  	ret = v4l2_async_register_subdev_sensor(&imx412->sd);
>  	if (ret < 0) {
>  		dev_err(imx412->dev,
> -			"failed to register async subdev: %d", ret);
> +			"failed to register async subdev: %d\n", ret);
>  		goto error_media_entity;
>  	}
>  
>
> ---
> base-commit: ae58226b89ac0cffa05ba7357733776542e40216
> change-id: 20241118-imx412-newlines-3b0321da960d
>
> Best regards,






[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux