On Tue, Nov 19, 2024 at 01:10:35PM +0000, Bryan O'Donoghue wrote:
> Add dtsi to describe the xe180100 CAMSS block
>
> 4 x CSIPHY
> 2 x CSID
> 2 x CSID Lite
> 2 x IFE
> 2 x IFE Lite
>
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/x1e80100.dtsi | 180 +++++++++++++++++++++++++++++++++
> 1 file changed, 180 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
> index c19754fdc7e0fa4f674ce19f813db77fe2615cf3..f23352493cb270c0fdc3c42add032286601db1e9 100644
> --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
> +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
> @@ -4730,6 +4730,186 @@ cci1_i2c1: i2c-bus@1 {
> };
> };
>
> + camss: camss@ac62000 {
> + compatible = "qcom,x1e80100-camss";
> +
> + reg = <0 0x0acb7000 0 0x2000>,
It does not look like you tested the DTS against bindings. Please run
'make dtbs_check W=1' (see
Documentation/devicetree/bindings/writing-schema.rst or
https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
for instructions).
Best regards,
Krzysztof
