Add bindings for OX05B1S sensor driver Signed-off-by: Mirela Rabulea <mirela.rabulea@xxxxxxx> --- .../bindings/media/i2c/ovti,ox05b1s.yaml | 109 ++++++++++++++++++ 1 file changed, 109 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ox05b1s.yaml diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ox05b1s.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ox05b1s.yaml new file mode 100644 index 000000000000..d47e1950f24d --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ox05b1s.yaml @@ -0,0 +1,109 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (C) 2024, NXP +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ovti,ox05b1s.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Omnivision OX05B1S Image Sensor + +maintainers: + - Mirela Rabulea <mirela.rabulea@xxxxxxx> + +description: |- + The Omnivision OX05B1S is a 1/2.5-Inch CMOS image sensor with an active array size + of 2592 x 1944. It is programmable through I2C interface. + The sensor output is available via CSI-2 serial data output. + +properties: + compatible: + items: + - enum: + - ovti,ox05b1s + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + description: Input clock (24 MHz) + items: + - const: csi_mclk + + assigned-clocks: + maxItems: 1 + + assigned-clock-parents: + maxItems: 1 + + assigned-clock-rates: + maxItems: 1 + + reset-gpios: + description: Reference to the GPIO connected to the XSHUTDOWN pin. Active low. + maxItems: 1 + + orientation: true + rotation: true + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + description: MIPI CSI-2 transmitter port + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + anyOf: + - items: + - const: 1 + - const: 2 + - items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + required: + - data-lanes + + required: + - endpoint + +required: + - compatible + - reg + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ox05b1s: ox05b1s@36 { + compatible = "ovti,ox05b1s"; + reg = <0x36>; + reset-gpios = <&i2c3_gpio_expander_20 2 GPIO_ACTIVE_LOW>; + orientation = <2>; + rotation = <0>; + status = "okay"; + + port { + ox05b1s_mipi_0_ep: endpoint { + remote-endpoint = <&mipi_csi0_ep>; + data-lanes = <1 2 3 4>; + }; + }; + }; + }; +... -- 2.25.1
