Am 14.12.2010 18:23, schrieb Julian Scheel:
Am 07.12.2010 14:01, schrieb Andy Walls:
It appears to be in the media_tree.git repository on the
staging/for_v2.6.37-rc1 branch:
http://git.linuxtv.org/media_tree.git?a=tree;f=drivers/media/video/saa7164;h=0acaa4ada45ae6881bfbb19447ae9db43f06ef9b;hb=staging/for_v2.6.37-rc1
saa7164-cards.c appears to have analog entries added for HVR-2200's and
saa7164-encoder.c has a number of V4L ioctl()'s for MPEG streams.
Is there any reason, why the additional card-information found here:
http://www.kernellabs.com/hg/~stoth/saa7164-dev/
is not yet in the kernel tree?
Actually after manually adding this changeset into linux-26.37-rc5 tree
the card is detected and dmesg says:
[ 3.653289] saa7164 driver loaded
[ 3.653340] saa7164 0000:02:00.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 3.654909] CORE saa7164[0]: subsystem: 0070:8940, board: Hauppauge
WinTV-HVR2200 [card=9,autodetected]
[ 3.654914] saa7164[0]/0: found at 0000:02:00.0, rev: 129, irq: 16,
latency: 0, mmio: 0xfb000000
[ 3.654919] saa7164 0000:02:00.0: setting latency timer to 64
[ 3.813647] saa7164_downloadfirmware() no first image
[ 3.814781] saa7164_downloadfirmware() Waiting for firmware upload
(NXP7164-2010-03-10.1.fw)
[ 3.839841] saa7164_downloadfirmware() firmware read 4019072 bytes.
[ 3.839843] saa7164_downloadfirmware() firmware loaded.
[ 3.839844] Firmware file header part 1:
[ 3.839846] .FirmwareSize = 0x0
[ 3.839847] .BSLSize = 0x0
[ 3.839848] .Reserved = 0x3d538
[ 3.839849] .Version = 0x3
[ 3.839850] saa7164_downloadfirmware() SecBootLoader.FileSize = 4019072
[ 3.839856] saa7164_downloadfirmware() FirmwareSize = 0x1fd6
[ 3.839857] saa7164_downloadfirmware() BSLSize = 0x0
[ 3.839858] saa7164_downloadfirmware() Reserved = 0x0
[ 3.839860] saa7164_downloadfirmware() Version = 0x1661c00
[ 10.693325] saa7164_downloadimage() Image downloaded, booting...
[ 10.797316] saa7164_downloadimage() Image booted successfully.
[ 10.797332] starting firmware download(2)
[ 13.425188] saa7164_downloadimage() Image downloaded, booting...
[ 15.089109] saa7164_downloadimage() Image booted successfully.
[ 15.089128] firmware download complete.
[ 15.129700] tveeprom 1-0000: Hauppauge model 89619, rev D3F2, serial#
7259796
[ 15.129703] tveeprom 1-0000: MAC address is 00:0d:fe:6e:c6:94
[ 15.129704] tveeprom 1-0000: tuner model is NXP 18271C2_716x (idx
152, type 4)
[ 15.129707] tveeprom 1-0000: TV standards PAL(B/G) NTSC(M) PAL(I)
SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc)
[ 15.129709] tveeprom 1-0000: audio processor is SAA7164 (idx 43)
[ 15.129710] tveeprom 1-0000: decoder processor is SAA7164 (idx 40)
[ 15.129711] tveeprom 1-0000: has radio
[ 15.129712] saa7164[0]: Hauppauge eeprom: model=89619
[ 15.189491] tda18271 2-0060: creating new instance
[ 15.194156] TDA18271HD/C2 detected @ 2-0060
[ 15.446842] DVB: registering new adapter (saa7164)
[ 15.446845] DVB: registering adapter 0 frontend 0 (NXP TDA10048HN
DVB-T)...
[ 15.477568] tda18271 3-0060: creating new instance
[ 15.482514] TDA18271HD/C2 detected @ 3-0060
[ 15.733973] tda18271: performing RF tracking filter calibration
[ 18.082962] tda18271: RF tracking filter calibration complete
[ 18.083552] DVB: registering new adapter (saa7164)
[ 18.083554] DVB: registering adapter 1 frontend 0 (NXP TDA10048HN
DVB-T)...
dvb-devices are registered, but no video-devices. Any thoughts?
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
