Hi Prabhakar, Thanks this series. On Fri, Oct 18, 2024 at 04:32:20PM +0100, Prabhakar wrote: > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> > > Hi All, > > This patch series aims to add the below features, > - Support subdev active state > - Support for streams > - Support for virtual channel > - Code cleanup > > Note, these patches are dependent on below: > 1] https://patchwork.kernel.org/project/linux-media/patch/20240416193319.778192-27-sakari.ailus@xxxxxxxxxxxxxxx/ > 2] https://patchwork.kernel.org/project/linux-media/patch/20240416193319.778192-26-sakari.ailus@xxxxxxxxxxxxxxx/ I thinks also: 3] https://patchwork.kernel.org/project/linux-media/patch/20240416193319.778192-45-sakari.ailus@xxxxxxxxxxxxxxx/ > > v2->v3 > - Fixed review commments from Laurent > - Included RB tags from Laurent > - Dropped patch "media: i2c: ov5645: Enable runtime PM after v4l2_async_register_subdev()" > - Fixed checkpatch issues (ie used --max-line-length=80) > > RFC->v2 > - Dropped setting of VC using routes > - Defaulted the native format to MEDIA_BUS_FMT_SBGGR8_1X8 > - Fixed ov5645_enum_frame_size and ov5645_enum_mbus_code > for internal image pad > > RFC patch, > Link: https://lore.kernel.org/all/20240904210719.52466-1-prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx/ > > Test logs: > ==================================== > root@smarc-rzg2l:~# media-ctl -p > ...... > - entity 4: ov5645 0-003c (2 pads, 1 link, 1 route) > type V4L2 subdev subtype Sensor flags 0 > device node name /dev/v4l-subdev1 > routes: > 1/0 -> 0/0 [ACTIVE] > pad0: SOURCE > [stream:0 fmt:UYVY8_1X16/1280x960 field:none colorspace:srgb xfer:srgb ycbcr:601 quantization:lim-range > crop:(0,0)/1280x960] > -> "csi-10830400.csi2":0 [ENABLED,IMMUTABLE] > pad1: SINK,0x8 > [stream:0 fmt:SBGGR8_1X8/2592x1944 field:none colorspace:srgb xfer:srgb ycbcr:601 quantization:lim-range > crop:(0,0)/1280x960] > ...... > > root@smarc-rzg2l:~# v4l2-ctl --device /dev/v4l-subdev1 --list-subdev-mbus-codes pad=0 > ioctl: VIDIOC_SUBDEV_ENUM_MBUS_CODE (pad=0,stream=0) > 0x200f: MEDIA_BUS_FMT_UYVY8_1X16 > root@smarc-rzg2l:~# v4l2-ctl --device /dev/v4l-subdev1 --list-subdev-mbus-codes pad=1 > ioctl: VIDIOC_SUBDEV_ENUM_MBUS_CODE (pad=1,stream=0) > 0x3001: MEDIA_BUS_FMT_SBGGR8_1X8 > root@smarc-rzg2l:~# v4l2-ctl --device /dev/v4l-subdev1 --list-subdev-framesizes pad=1,code=0x3001 > ioctl: VIDIOC_SUBDEV_ENUM_FRAME_SIZE (pad=1,stream=0) > Size Range: 2592x1944 - 2592x1944 > root@smarc-rzg2l:~# v4l2-ctl --device /dev/v4l-subdev1 --list-subdev-framesizes pad=0,code=0x200f > ioctl: VIDIOC_SUBDEV_ENUM_FRAME_SIZE (pad=0,stream=0) > Size Range: 1280x960 - 1280x960 > Size Range: 1920x1080 - 1920x1080 > Size Range: 2592x1944 - 2592x1944 > root@smarc-rzg2l:~# v4l2-compliance -u /dev/v4l-subdev1 > v4l2-compliance 1.28.1-5233, 64 bits, 64-bit time_t > v4l2-compliance SHA: fc15e229d9d3 2024-07-23 19:22:15 > > Compliance test for device /dev/v4l-subdev1: > > Driver Info: > Driver version : 6.12.0 > Capabilities : 0x00000002 > Streams Support > Client Capabilities: 0x00000[ 2429.125325] ov5645 0-003c: ================= START STATUS ================= > 00000000003 > streams int[ 2429.134589] ov5645 0-003c: ================== END STATUS ================== > erval-uses-which > Required ioctls: > test VIDIOC_SUDBEV_QUERYCAP: OK > test invalid ioctls: OK > > Allow for multiple opens: > test second /dev/v4l-subdev1 open: OK > test VIDIOC_SUBDEV_QUERYCAP: OK > test for unlimited opens: OK > > Debug ioctls: > test VIDIOC_LOG_STATUS: OK (Not Supported) > > Input ioctls: > test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) > test VIDIOC_ENUMAUDIO: OK (Not Supported) > test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) > test VIDIOC_G/S_AUDIO: OK (Not Supported) > Inputs: 0 Audio Inputs: 0 Tuners: 0 > > Output ioctls: > test VIDIOC_G/S_MODULATOR: OK (Not Supported) > test VIDIOC_G/S_FREQUENCY: OK (Not Supported) > test VIDIOC_ENUMAUDOUT: OK (Not Supported) > test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) > test VIDIOC_G/S_AUDOUT: OK (Not Supported) > Outputs: 0 Audio Outputs: 0 Modulators: 0 > > Input/Output configuration ioctls: > test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) > test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) > test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) > test VIDIOC_G/S_EDID: OK (Not Supported) > > Sub-Device routing ioctls: > test Try VIDIOC_SUBDEV_G_ROUTING/VIDIOC_SUBDEV_S_ROUTING: OK > test Active VIDIOC_SUBDEV_G_ROUTING/VIDIOC_SUBDEV_S_ROUTING: OK > > Control ioctls: > test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK > test VIDIOC_QUERYCTRL: OK > test VIDIOC_G/S_CTRL: OK > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK > test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) > Standard Controls: 12 Private Controls: 0 > > Format ioctls: > test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported) > test VIDIOC_G/S_PARM: OK (Not Supported) > test VIDIOC_G_FBUF: OK (Not Supported) > test VIDIOC_G_FMT: OK (Not Supported) > test VIDIOC_TRY_FMT: OK (Not Supported) > test VIDIOC_S_FMT: OK (Not Supported) > test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) > test Cropping: OK (Not Supported) > test Composing: OK (Not Supported) > test Scaling: OK (Not Supported) > > Codec ioctls: > test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) > test VIDIOC_G_ENC_INDEX: OK (Not Supported) > test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) > > Buffer ioctls: > test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported) > test CREATE_BUFS maximum buffers: OK > test VIDIOC_REMOVE_BUFS: OK > test VIDIOC_EXPBUF: OK (Not Supported) > test Requests: OK (Not Supported) > > Total for device /dev/v4l-subdev1: 47, Succeeded: 47, Failed: 0, Warnings: 0 > ------------------------------------------------------------ > > Lad Prabhakar (10): > media: i2c: ov5645: Add V4L2_SUBDEV_FL_HAS_EVENTS and subscribe hooks > media: i2c: ov5645: Use local `dev` pointer for subdev device > assignment > media: i2c: ov5645: Replace dev_err with dev_err_probe in probe > function > media: i2c: ov5645: Use v4l2_async_register_subdev_sensor() > media: i2c: ov5645: Drop `power_lock` mutex > media: i2c: ov5645: Use subdev active state > media: i2c: ov5645: Switch to {enable,disable}_streams > media: i2c: ov5645: Report streams using frame descriptors > media: i2c: ov5645: Add internal image sink pad > media: i2c: ov5645: Report internal routes to userspace > > drivers/media/i2c/ov5645.c | 435 +++++++++++++++++++++---------------- > 1 file changed, 246 insertions(+), 189 deletions(-) > > -- > 2.43.0 > > Same result here. Tested on rzg2l-smarc evk. Tested-by: Tommaso Merciai <tomm.merciai@xxxxxxxxx> Thanks & Regards, Tommaso
