Add RGB24 and RAW8 and RAW10 bayer formats. RGB24 is mostly for TPG
purposes, but RAW8 and RAW10 are widely used by sensors.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
---
drivers/media/i2c/ds90ub960.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/media/i2c/ds90ub960.c b/drivers/media/i2c/ds90ub960.c
index 5238088e23e2..09a19553ec53 100644
--- a/drivers/media/i2c/ds90ub960.c
+++ b/drivers/media/i2c/ds90ub960.c
@@ -580,11 +580,23 @@ struct ub960_format_info {
};
static const struct ub960_format_info ub960_formats[] = {
+ { .code = MEDIA_BUS_FMT_RGB888_1X24, .bpp = 24, .datatype = MIPI_CSI2_DT_RGB888, },
+
{ .code = MEDIA_BUS_FMT_YUYV8_1X16, .bpp = 16, .datatype = MIPI_CSI2_DT_YUV422_8B, },
{ .code = MEDIA_BUS_FMT_UYVY8_1X16, .bpp = 16, .datatype = MIPI_CSI2_DT_YUV422_8B, },
{ .code = MEDIA_BUS_FMT_VYUY8_1X16, .bpp = 16, .datatype = MIPI_CSI2_DT_YUV422_8B, },
{ .code = MEDIA_BUS_FMT_YVYU8_1X16, .bpp = 16, .datatype = MIPI_CSI2_DT_YUV422_8B, },
+ { .code = MEDIA_BUS_FMT_SBGGR8_1X8, .bpp = 8, .datatype = MIPI_CSI2_DT_RAW8, },
+ { .code = MEDIA_BUS_FMT_SGBRG8_1X8, .bpp = 8, .datatype = MIPI_CSI2_DT_RAW8, },
+ { .code = MEDIA_BUS_FMT_SGRBG8_1X8, .bpp = 8, .datatype = MIPI_CSI2_DT_RAW8, },
+ { .code = MEDIA_BUS_FMT_SRGGB8_1X8, .bpp = 8, .datatype = MIPI_CSI2_DT_RAW8, },
+
+ { .code = MEDIA_BUS_FMT_SBGGR10_1X10, .bpp = 10, .datatype = MIPI_CSI2_DT_RAW10, },
+ { .code = MEDIA_BUS_FMT_SGBRG10_1X10, .bpp = 10, .datatype = MIPI_CSI2_DT_RAW10, },
+ { .code = MEDIA_BUS_FMT_SGRBG10_1X10, .bpp = 10, .datatype = MIPI_CSI2_DT_RAW10, },
+ { .code = MEDIA_BUS_FMT_SRGGB10_1X10, .bpp = 10, .datatype = MIPI_CSI2_DT_RAW10, },
+
{ .code = MEDIA_BUS_FMT_SBGGR12_1X12, .bpp = 12, .datatype = MIPI_CSI2_DT_RAW12, },
{ .code = MEDIA_BUS_FMT_SGBRG12_1X12, .bpp = 12, .datatype = MIPI_CSI2_DT_RAW12, },
{ .code = MEDIA_BUS_FMT_SGRBG12_1X12, .bpp = 12, .datatype = MIPI_CSI2_DT_RAW12, },
--
2.43.0
