From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> Move the RZ/G2L CRU register definitions from `rzg2l-video.c` to a dedicated header file, `rzg2l-cru-regs.h`. Separating these definitions into their own file improves the readability of the code. Suggested-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> --- v2->v3 - New patch --- .../renesas/rzg2l-cru/rzg2l-cru-regs.h | 79 +++++++++++++++++++ .../platform/renesas/rzg2l-cru/rzg2l-video.c | 69 +--------------- 2 files changed, 80 insertions(+), 68 deletions(-) create mode 100644 drivers/media/platform/renesas/rzg2l-cru/rzg2l-cru-regs.h diff --git a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-cru-regs.h b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-cru-regs.h new file mode 100644 index 000000000000..458f7452e5d3 --- /dev/null +++ b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-cru-regs.h @@ -0,0 +1,79 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * rzg2l-cru-regs.h--RZ/G2L (and alike SoCs) CRU Registers Definitions + * + * Copyright (C) 2024 Renesas Electronics Corp. + */ + +#ifndef __RZG2L_CRU_REGS_H__ +#define __RZG2L_CRU_REGS_H__ + +/* HW CRU Registers Definition */ + +/* CRU Control Register */ +#define CRUnCTRL 0x0 +#define CRUnCTRL_VINSEL(x) ((x) << 0) + +/* CRU Interrupt Enable Register */ +#define CRUnIE 0x4 +#define CRUnIE_EFE BIT(17) + +/* CRU Interrupt Status Register */ +#define CRUnINTS 0x8 +#define CRUnINTS_SFS BIT(16) + +/* CRU Reset Register */ +#define CRUnRST 0xc +#define CRUnRST_VRESETN BIT(0) + +/* Memory Bank Base Address (Lower) Register for CRU Image Data */ +#define AMnMBxADDRL(x) (0x100 + ((x) * 8)) + +/* Memory Bank Base Address (Higher) Register for CRU Image Data */ +#define AMnMBxADDRH(x) (0x104 + ((x) * 8)) + +/* Memory Bank Enable Register for CRU Image Data */ +#define AMnMBVALID 0x148 +#define AMnMBVALID_MBVALID(x) GENMASK(x, 0) + +/* Memory Bank Status Register for CRU Image Data */ +#define AMnMBS 0x14c +#define AMnMBS_MBSTS 0x7 + +/* AXI Master Transfer Setting Register for CRU Image Data */ +#define AMnAXIATTR 0x158 +#define AMnAXIATTR_AXILEN_MASK GENMASK(3, 0) +#define AMnAXIATTR_AXILEN (0xf) + +/* AXI Master FIFO Pointer Register for CRU Image Data */ +#define AMnFIFOPNTR 0x168 +#define AMnFIFOPNTR_FIFOWPNTR GENMASK(7, 0) +#define AMnFIFOPNTR_FIFORPNTR_Y GENMASK(23, 16) + +/* AXI Master Transfer Stop Register for CRU Image Data */ +#define AMnAXISTP 0x174 +#define AMnAXISTP_AXI_STOP BIT(0) + +/* AXI Master Transfer Stop Status Register for CRU Image Data */ +#define AMnAXISTPACK 0x178 +#define AMnAXISTPACK_AXI_STOP_ACK BIT(0) + +/* CRU Image Processing Enable Register */ +#define ICnEN 0x200 +#define ICnEN_ICEN BIT(0) + +/* CRU Image Processing Main Control Register */ +#define ICnMC 0x208 +#define ICnMC_CSCTHR BIT(5) +#define ICnMC_INF(x) ((x) << 16) +#define ICnMC_VCSEL(x) ((x) << 22) +#define ICnMC_INF_MASK GENMASK(21, 16) + +/* CRU Module Status Register */ +#define ICnMS 0x254 +#define ICnMS_IA BIT(2) + +/* CRU Data Output Mode Register */ +#define ICnDMR 0x26c + +#endif /* __RZG2L_CRU_REGS_H__ */ diff --git a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-video.c b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-video.c index c3d10b001b7c..d7c82c7b9044 100644 --- a/drivers/media/platform/renesas/rzg2l-cru/rzg2l-video.c +++ b/drivers/media/platform/renesas/rzg2l-cru/rzg2l-video.c @@ -20,74 +20,7 @@ #include <media/videobuf2-dma-contig.h> #include "rzg2l-cru.h" - -/* HW CRU Registers Definition */ - -/* CRU Control Register */ -#define CRUnCTRL 0x0 -#define CRUnCTRL_VINSEL(x) ((x) << 0) - -/* CRU Interrupt Enable Register */ -#define CRUnIE 0x4 -#define CRUnIE_EFE BIT(17) - -/* CRU Interrupt Status Register */ -#define CRUnINTS 0x8 -#define CRUnINTS_SFS BIT(16) - -/* CRU Reset Register */ -#define CRUnRST 0xc -#define CRUnRST_VRESETN BIT(0) - -/* Memory Bank Base Address (Lower) Register for CRU Image Data */ -#define AMnMBxADDRL(x) (0x100 + ((x) * 8)) - -/* Memory Bank Base Address (Higher) Register for CRU Image Data */ -#define AMnMBxADDRH(x) (0x104 + ((x) * 8)) - -/* Memory Bank Enable Register for CRU Image Data */ -#define AMnMBVALID 0x148 -#define AMnMBVALID_MBVALID(x) GENMASK(x, 0) - -/* Memory Bank Status Register for CRU Image Data */ -#define AMnMBS 0x14c -#define AMnMBS_MBSTS 0x7 - -/* AXI Master Transfer Setting Register for CRU Image Data */ -#define AMnAXIATTR 0x158 -#define AMnAXIATTR_AXILEN_MASK GENMASK(3, 0) -#define AMnAXIATTR_AXILEN (0xf) - -/* AXI Master FIFO Pointer Register for CRU Image Data */ -#define AMnFIFOPNTR 0x168 -#define AMnFIFOPNTR_FIFOWPNTR GENMASK(7, 0) -#define AMnFIFOPNTR_FIFORPNTR_Y GENMASK(23, 16) - -/* AXI Master Transfer Stop Register for CRU Image Data */ -#define AMnAXISTP 0x174 -#define AMnAXISTP_AXI_STOP BIT(0) - -/* AXI Master Transfer Stop Status Register for CRU Image Data */ -#define AMnAXISTPACK 0x178 -#define AMnAXISTPACK_AXI_STOP_ACK BIT(0) - -/* CRU Image Processing Enable Register */ -#define ICnEN 0x200 -#define ICnEN_ICEN BIT(0) - -/* CRU Image Processing Main Control Register */ -#define ICnMC 0x208 -#define ICnMC_CSCTHR BIT(5) -#define ICnMC_INF(x) ((x) << 16) -#define ICnMC_VCSEL(x) ((x) << 22) -#define ICnMC_INF_MASK GENMASK(21, 16) - -/* CRU Module Status Register */ -#define ICnMS 0x254 -#define ICnMS_IA BIT(2) - -/* CRU Data Output Mode Register */ -#define ICnDMR 0x26c +#include "rzg2l-cru-regs.h" #define RZG2L_TIMEOUT_MS 100 #define RZG2L_RETRIES 10 -- 2.43.0
