Re: [PATCH v4 0/7] Add SDM670 camera subsystem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Sep 06, 2024 at 04:00:32PM +0300, Vladimir Zapolskiy wrote:
> Hi Bryan, Richard,
> 
> On 9/6/24 15:19, Bryan O'Donoghue wrote:
> > On 06/09/2024 03:36, Richard Acayan wrote:
> > > On Thu, Sep 05, 2024 at 10:09:34PM +0200, Andi Shyti wrote:
> > > > Hi Richard,
> > > > 
> > > > On Tue, Sep 03, 2024 at 10:04:49PM GMT, Richard Acayan wrote:
> > > > > This adds support for the camera subsystem on the Snapdragon 670.
> > > > > 
> > > > > As of next-20240902, camss seems to be a bit broken, but the same series
> > > > > works on stable (although it is much less reliable now that the CCI clock
> > > > > frequency is not being assigned).
> > > > 
> > > > I am not understanding this bit: is this series making it better
> > > > or not? Can you please clarify what is broken, what is less
> > > > reliable and what works?
> > > 
> > > When applying this camss series and some camera sensor patches on
> > > linux-next, the Pixel 3a seems to hang when camera capture starts.
> > > 
> > > When applying the same patches on stable, the camera does not cause the
> > > Pixel 3a to hang.
> > 
> > Right so -next isn't stable that's not exactly a revelation.
> > 
> > 
> > > When these device tree properties from the previous series were removed:
> > > 
> > > 			assigned-clocks = <&camcc CAM_CC_CCI_CLK>;
> > > 			assigned-clock-rates = <37500000>;
> > > 
> > > the CCI would sometimes fail to probe with the error:
> > 
> > Right, we don't have clk_set_rate in the cci driver.
> > 
> > Maybe just leave the assigned clock for this submission and we can do a
> > sweep of fixes to CCI at a later stage including setting the clock
> > instead of having it be assigned.
> 
> first of all it would be nice to confirm that the setting of a particular
> clock frequency is actually needed.
> 
> Fortunately it's pretty trivial to check it in runtime with a temporary
> modification in the board dts file, namely disable CAMSS in board dts file,
> but keep CCI enabled, then simply scan the bus with a regular "i2cdetect"
> tool in runtime.
> 
> If i2cdetect on the CCI bus works only for 37.5MHz clock frequency, then it
> is needed, otherwise (and this is my expectation) it is not needed neither
> in the dtsi files nor in the driver.
> 
> > > 
> > > 	[   51.572732] i2c-qcom-cci ac4a000.cci: deferred probe timeout, ignoring dependency
> > > 	[   51.572769] i2c-qcom-cci ac4a000.cci: probe with driver i2c-qcom-cci failed with error -110
> > > 
> > > On further testing, the rate can be set to 19.2 MHz, and there would be
> > > no failure (or rather, it wouldn't happen often enough for me to witness
> > > it).
> > 
> > That's expected 19.2 and 37.5 MHz are supported by CAMCC for your part.
> > 
> 
> I read it as the setting of 37.5MHz clock frequency is not needed, please
> correct me.

It is not. My test setup just needs specific EPROBE_DEFER behaviour
(my setup being postmarketOS with a full-disk encryption password prompt
and camcc-sdm845 loaded after mounting the root filesystem).

In drivers/base/platform.c, the platform_probe() function calls
of_clk_set_defaults() then dev_pm_domain_attach() prior to probing the
driver:

	static int platform_probe(struct device *_dev)
	{
		...
		ret = of_clk_set_defaults(_dev->of_node, false);
		if (ret < 0)
			return ret;
	
		ret = dev_pm_domain_attach(_dev, true);
		if (ret)
			goto out;
	
		if (drv->probe) {
			ret = drv->probe(dev);
			if (ret)
				dev_pm_domain_detach(_dev, true);
		}
		...
	}

When handling the assigned-clock-rates property,
of_clk_get_hw_from_clkspec() eventually returns ERR_PTR(-EPROBE_DEFER),
being propagated all the way.

When handling the power-domains property (if not avoided by deferring
with the assigned clock), __genpd_dev_pm_attach() returns a value
returned by driver_deferred_probe_check_state(), which is immediately
-ETIMEDOUT.




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux