Re: [RFC PATCH 0/4] Linaro restricted heap

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 9/23/24 1:33 AM, Dmitry Baryshkov wrote:
Hi,

On Fri, Aug 30, 2024 at 09:03:47AM GMT, Jens Wiklander wrote:
Hi,

This patch set is based on top of Yong Wu's restricted heap patch set [1].
It's also a continuation on Olivier's Add dma-buf secure-heap patch set [2].

The Linaro restricted heap uses genalloc in the kernel to manage the heap
carvout. This is a difference from the Mediatek restricted heap which
relies on the secure world to manage the carveout.

I've tried to adress the comments on [2], but [1] introduces changes so I'm
afraid I've had to skip some comments.

I know I have raised the same question during LPC (in connection to
Qualcomm's dma-heap implementation). Is there any reason why we are
using generic heaps instead of allocating the dma-bufs on the device
side?

In your case you already have TEE device, you can use it to allocate and
export dma-bufs, which then get imported by the V4L and DRM drivers.


This goes to the heart of why we have dma-heaps in the first place.
We don't want to burden userspace with having to figure out the right
place to get a dma-buf for a given use-case on a given hardware.
That would be very non-portable, and fail at the core purpose of
a kernel: to abstract hardware specifics away.

Worse, the actual interface for dma-buf exporting changes from
framework to framework (getting a dma-buf from DRM is different
than V4L, and there would be yet another API for TEE, etc..)

Most subsystem don't need an allocator, they work just fine
simply being only dma-bufs importers. Recent example being the
IIO subsystem[0], for which some early posting included an
allocator, but in the end, all that was needed was to consume
buffers.

For devices that don't actually contain memory there is no
reason to be an exporter. What most want is just to consume
normal system memory. Or system memory with some constraints
(e.g. contiguous, coherent, restricted, etc..).

I have a feeling (I might be completely wrong here) that by using
generic dma-buf heaps we can easily end up in a situation when the
userspace depends heavily on the actual platform being used (to map the
platform to heap names). I think we should instead depend on the
existing devices (e.g. if there is a TEE device, use an IOCTL to
allocate secured DMA BUF from it, otherwise check for QTEE device,
otherwise check for some other vendor device).

The mental experiment to check if the API is correct is really simple:
Can you use exactly the same rootfs on several devices without
any additional tuning (e.g. your QEMU, HiKey, a Mediatek board, Qualcomm
laptop, etc)?


This is a great north star to follow. And exactly the reason we should
*not* be exposing device specific constraints to userspace. The constrains
change based on the platform. So a userspace would have to also pick
a different set of constraints based on each platform.

Userspace knows which subsystems it will attach a buffer, and the
kernel knows what constraints those devices have on a given platform.
Ideal case is then allocate from the one exporter, attach to various
devices, and have the constraints solved at map time by the exporter
based on the set of attached devices.

For example, on one platform the display needs contiguous buffers,
but on a different platform the display can scatter-gather. So
what heap should our generic application allocate from when it
wants a buffer consumable by the display, CMA or System?
Answer *should* be always use the generic exporter, and that
exporter then picks the right backing type based on the platform.

Userspace shouldn't be dealing with any of these constraints
(looking back, adding the CMA heap was probably incorrect,
and the System heap should have been the only one. Idea back
then was a userspace helper would show up to do the constraint
solving and pick the right heap. That has yet to materialize and
folks are still just hardcoding which heap to use..).

Same for this restricted heap, I'd like to explore if we can
enhance the System heap such that when attached to the TEE framework,
the backing memory is either made restricted by fire-walling,
or allocating from a TEE carveout (based on platform).

This will mean more inter-subsystem coordination, but we can
iterate on these in kernel interfaces. We cannot iterate on
userspace interfaces, those have to be correct the first time.

Andrew

[0] https://www.kernel.org/doc/html/next/iio/iio_dmabuf_api.html


This can be tested on QEMU with the following steps:
repo init -u https://github.com/jenswi-linaro/manifest.git -m qemu_v8.xml \
         -b prototype/sdp-v1
repo sync -j8
cd build
make toolchains -j4
make all -j$(nproc)
make run-only
# login and at the prompt:
xtest --sdp-basic

https://optee.readthedocs.io/en/latest/building/prerequisites.html
list dependencies needed to build the above.

The tests are pretty basic, mostly checking that a Trusted Application in
the secure world can access and manipulate the memory.

- Can we test that the system doesn't crash badly if user provides
   non-secured memory to the users which expect a secure buffer?

- At the same time corresponding entities shouldn't decode data to the
   buffers accessible to the rest of the sytem.


Cheers,
Jens

[1] https://lore.kernel.org/dri-devel/20240515112308.10171-1-yong.wu@xxxxxxxxxxxx/
[2] https://lore.kernel.org/lkml/20220805135330.970-1-olivier.masse@xxxxxxx/

Changes since Olivier's post [2]:
* Based on Yong Wu's post [1] where much of dma-buf handling is done in
   the generic restricted heap
* Simplifications and cleanup
* New commit message for "dma-buf: heaps: add Linaro restricted dmabuf heap
   support"
* Replaced the word "secure" with "restricted" where applicable

Etienne Carriere (1):
   tee: new ioctl to a register tee_shm from a dmabuf file descriptor

Jens Wiklander (2):
   dma-buf: heaps: restricted_heap: add no_map attribute
   dma-buf: heaps: add Linaro restricted dmabuf heap support

Olivier Masse (1):
   dt-bindings: reserved-memory: add linaro,restricted-heap

  .../linaro,restricted-heap.yaml               |  56 ++++++
  drivers/dma-buf/heaps/Kconfig                 |  10 ++
  drivers/dma-buf/heaps/Makefile                |   1 +
  drivers/dma-buf/heaps/restricted_heap.c       |  17 +-
  drivers/dma-buf/heaps/restricted_heap.h       |   2 +
  .../dma-buf/heaps/restricted_heap_linaro.c    | 165 ++++++++++++++++++
  drivers/tee/tee_core.c                        |  38 ++++
  drivers/tee/tee_shm.c                         | 104 ++++++++++-
  include/linux/tee_drv.h                       |  11 ++
  include/uapi/linux/tee.h                      |  29 +++
  10 files changed, 426 insertions(+), 7 deletions(-)
  create mode 100644 Documentation/devicetree/bindings/reserved-memory/linaro,restricted-heap.yaml
  create mode 100644 drivers/dma-buf/heaps/restricted_heap_linaro.c

--
2.34.1






[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux