[PATCH v3 2/9] media: platform: Add c3 mipi csi2 driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Keke Li <keke.li@xxxxxxxxxxx>

This driver is used to receive mipi data from image sensor.

Reviewed-by: Daniel Scally <dan.scally@xxxxxxxxxxxxxxxx>
Signed-off-by: Keke Li <keke.li@xxxxxxxxxxx>
---
 MAINTAINERS                                        |   7 +
 drivers/media/platform/amlogic/Kconfig             |   1 +
 drivers/media/platform/amlogic/Makefile            |   2 +
 .../media/platform/amlogic/c3-mipi-csi2/Kconfig    |  16 +
 .../media/platform/amlogic/c3-mipi-csi2/Makefile   |   3 +
 .../platform/amlogic/c3-mipi-csi2/c3-mipi-csi2.c   | 910 +++++++++++++++++++++
 6 files changed, 939 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 2cdd7cacec86..9e75874a6e69 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1209,6 +1209,13 @@ F:	Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml
 F:	drivers/perf/amlogic/
 F:	include/soc/amlogic/
 
+AMLOGIC MIPI CSI2 DRIVER
+M:	Keke Li <keke.li@xxxxxxxxxxx>
+L:	linux-media@xxxxxxxxxxxxxxx
+S:	Maintained
+F:	Documentation/devicetree/bindings/media/amlogic,c3-mipi-csi2.yaml
+F:	drivers/media/platform/amlogic/c3-mipi-csi2/
+
 AMPHENOL CHIPCAP 2 HUMIDITY-TEMPERATURE IIO DRIVER
 M:	Javier Carrasco <javier.carrasco.cruz@xxxxxxxxx>
 L:	linux-hwmon@xxxxxxxxxxxxxxx
diff --git a/drivers/media/platform/amlogic/Kconfig b/drivers/media/platform/amlogic/Kconfig
index 5014957404e9..b7c2de14848b 100644
--- a/drivers/media/platform/amlogic/Kconfig
+++ b/drivers/media/platform/amlogic/Kconfig
@@ -2,4 +2,5 @@
 
 comment "Amlogic media platform drivers"
 
+source "drivers/media/platform/amlogic/c3-mipi-csi2/Kconfig"
 source "drivers/media/platform/amlogic/meson-ge2d/Kconfig"
diff --git a/drivers/media/platform/amlogic/Makefile b/drivers/media/platform/amlogic/Makefile
index d3cdb8fa4ddb..4f571ce5d13e 100644
--- a/drivers/media/platform/amlogic/Makefile
+++ b/drivers/media/platform/amlogic/Makefile
@@ -1,2 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
+
+obj-y += c3-mipi-csi2/
 obj-y += meson-ge2d/
diff --git a/drivers/media/platform/amlogic/c3-mipi-csi2/Kconfig b/drivers/media/platform/amlogic/c3-mipi-csi2/Kconfig
new file mode 100644
index 000000000000..0d7b2e203273
--- /dev/null
+++ b/drivers/media/platform/amlogic/c3-mipi-csi2/Kconfig
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+config VIDEO_C3_MIPI_CSI2
+	tristate "Amlogic C3 MIPI CSI-2 receiver"
+	depends on ARCH_MESON || COMPILE_TEST
+	depends on VIDEO_DEV
+	depends on OF
+	select MEDIA_CONTROLLER
+	select V4L2_FWNODE
+	select VIDEO_V4L2_SUBDEV_API
+	help
+	  Video4Linux2 driver for Amlogic C3 MIPI CSI-2 receiver.
+	  C3 MIPI CSI-2 receiver is used to receive MIPI data from
+	  image sensor.
+
+	  To compile this driver as a module choose m here.
diff --git a/drivers/media/platform/amlogic/c3-mipi-csi2/Makefile b/drivers/media/platform/amlogic/c3-mipi-csi2/Makefile
new file mode 100644
index 000000000000..cc08fc722bfd
--- /dev/null
+++ b/drivers/media/platform/amlogic/c3-mipi-csi2/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+obj-$(CONFIG_VIDEO_C3_MIPI_CSI2) += c3-mipi-csi2.o
diff --git a/drivers/media/platform/amlogic/c3-mipi-csi2/c3-mipi-csi2.c b/drivers/media/platform/amlogic/c3-mipi-csi2/c3-mipi-csi2.c
new file mode 100644
index 000000000000..6ac60d5b26a8
--- /dev/null
+++ b/drivers/media/platform/amlogic/c3-mipi-csi2/c3-mipi-csi2.c
@@ -0,0 +1,910 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright (C) 2024 Amlogic, Inc. All rights reserved
+ */
+
+#include <linux/cleanup.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+#include <media/v4l2-async.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-fwnode.h>
+#include <media/v4l2-mc.h>
+#include <media/v4l2-subdev.h>
+
+/* C3 CSI-2 submodule definition */
+enum {
+	SUBMD_APHY,
+	SUBMD_DPHY,
+	SUBMD_HOST,
+};
+
+#define CSI2_SUBMD_MASK             GENMASK(17, 16)
+#define CSI2_SUBMD_SHIFT            16
+#define CSI2_SUBMD(x)               (((x) & (CSI2_SUBMD_MASK)) >> (CSI2_SUBMD_SHIFT))
+#define CSI2_REG_ADDR_MASK          GENMASK(15, 0)
+#define CSI2_REG_ADDR(x)            ((x) & (CSI2_REG_ADDR_MASK))
+#define CSI2_REG_A(x)               ((SUBMD_APHY << CSI2_SUBMD_SHIFT) | (x))
+#define CSI2_REG_D(x)               ((SUBMD_DPHY << CSI2_SUBMD_SHIFT) | (x))
+#define CSI2_REG_H(x)               ((SUBMD_HOST << CSI2_SUBMD_SHIFT) | (x))
+
+#define MIPI_CSI2_CLOCK_NUM_MAX     3
+#define MIPI_CSI2_SUBDEV_NAME       "mipi-csi2"
+
+/* C3 CSI-2 APHY register */
+#define MIPI_CSI_2M_PHY2_CNTL1      CSI2_REG_A(0x44)
+#define MIPI_APHY_NORMAL_CNTL1      0x3f425C00
+
+#define MIPI_CSI_2M_PHY2_CNTL2      CSI2_REG_A(0x48)
+#define MIPI_APHY_4LANES_CNTL2      0x033a0000
+#define MIPI_APHY_NORMAL_CNTL2      0x333a0000
+
+#define MIPI_CSI_2M_PHY2_CNTL3      CSI2_REG_A(0x4c)
+#define MIPI_APHY_2LANES_CNTL3      0x03800000
+
+/* C3 CSI-2 DPHY register */
+#define MIPI_PHY_CTRL	            CSI2_REG_D(0x00)
+#define MIPI_DPHY_LANES_ENABLE      0x0
+
+#define MIPI_PHY_CLK_LANE_CTRL	    CSI2_REG_D(0x04)
+#define MIPI_DPHY_CLK_CONTINUE_MODE 0x3d8
+
+#define MIPI_PHY_DATA_LANE_CTRL     CSI2_REG_D(0x08)
+#define MIPI_DPHY_LANE_CTRL_DISABLE 0x0
+
+#define MIPI_PHY_DATA_LANE_CTRL1    CSI2_REG_D(0x0c)
+#define MIPI_DPHY_INSERT_ERRESC     BIT(0)
+#define MIPI_DPHY_HS_SYNC_CHECK     BIT(1)
+#define MIPI_DPHY_FIVE_HS_PIPE      GENMASK(6, 2)
+#define MIPI_DPHY_FIVE_HS_PIPE_SHIFT           2
+#define MIPI_DPHY_DATA_PIPE_SELECT  GENMASK(9, 7)
+#define MIPI_DPHY_DATA_PIPE_SELECT_SHIFT       7
+
+#define MIPI_PHY_TCLK_MISS	    CSI2_REG_D(0x10)
+#define MIPI_DPHY_CLK_MISS          0x9
+
+#define MIPI_PHY_TCLK_SETTLE	    CSI2_REG_D(0x14)
+#define MIPI_DPHY_CLK_SETTLE        0x1F
+
+#define MIPI_PHY_THS_EXIT	    CSI2_REG_D(0x18)
+#define MIPI_DPHY_HS_EXIT           0x8
+
+#define MIPI_PHY_THS_SKIP	    CSI2_REG_D(0x1c)
+#define MIPI_DPHY_HS_SKIP           0xa
+
+#define MIPI_PHY_THS_SETTLE	    CSI2_REG_D(0x20)
+#define MIPI_PHY_TINIT	            CSI2_REG_D(0x24)
+#define MIPI_DPHY_INIT_CYCLES       0x4e20
+
+#define MIPI_PHY_TULPS_C	    CSI2_REG_D(0x28)
+#define MIPI_DPHY_ULPS_CHECK_CYCLES 0x1000
+
+#define MIPI_PHY_TULPS_S	    CSI2_REG_D(0x2c)
+#define MIPI_DPHY_ULPS_START_CYCLES 0x100
+
+#define MIPI_PHY_TMBIAS             CSI2_REG_D(0x30)
+#define MIPI_DPHY_MBIAS_CYCLES      0x100
+
+#define MIPI_PHY_TLP_EN_W           CSI2_REG_D(0x34)
+#define MIPI_DPHY_ULPS_STOP_CYCLES  0xC
+
+#define MIPI_PHY_TLPOK	            CSI2_REG_D(0x38)
+#define MIPI_DPHY_POWER_UP_CYCLES   0x100
+
+#define MIPI_PHY_TWD_INIT	    CSI2_REG_D(0x3c)
+#define MIPI_DPHY_INIT_WATCH_DOG    0x400000
+
+#define MIPI_PHY_TWD_HS             CSI2_REG_D(0x40)
+#define MIPI_DPHY_HS_WATCH_DOG      0x400000
+
+#define MIPI_PHY_MUX_CTRL0	    CSI2_REG_D(0x284)
+#define MIPI_DPHY_LANE3_SELECT      GENMASK(3, 0)
+#define MIPI_DPHY_LANE2_SELECT      GENMASK(7, 4)
+#define MIPI_DPHY_LANE2_SELECT_SHIFT           4
+#define MIPI_DPHY_LANE1_SELECT      GENMASK(11, 8)
+#define MIPI_DPHY_LANE1_SELECT_SHIFT            8
+#define MIPI_DPHY_LANE0_SELECT      GENMASK(14, 12)
+
+#define MIPI_PHY_MUX_CTRL1	    CSI2_REG_D(0x288)
+#define MIPI_DPHY_LANE3_CTRL_SIGNAL GENMASK(3, 0)
+#define MIPI_DPHY_LANE2_CTRL_SIGNAL GENMASK(7, 4)
+#define MIPI_DPHY_LANE2_CTRL_SIGNAL_SHIFT      4
+#define MIPI_DPHY_LANE1_CTRL_SIGNAL GENMASK(11, 8)
+#define MIPI_DPHY_LANE1_CTRL_SIGNAL_SHIFT       8
+#define MIPI_DPHY_LANE0_CTRL_SIGNAL GENMASK(14, 12)
+#define MIPI_DPHY_CLK_SELECT        BIT(17)
+
+/* C3 CSI-2 HOST register */
+#define CSI2_HOST_N_LANES           CSI2_REG_H(0x04)
+#define CSI2_HOST_CSI2_RESETN       CSI2_REG_H(0x10)
+#define CSI2_HOST_RESETN_DEFAULT    0x0
+#define CSI2_HOST_RESETN_RST_VALUE  BIT(0)
+
+#define CSI2_HOST_MASK1             CSI2_REG_H(0x28)
+#define CSI2_HOST_ERROR_MASK1       GENMASK(28, 0)
+
+#define MIPI_CSI2_MAX_WIDTH         2888
+#define MIPI_CSI2_MIN_WIDTH         160
+#define MIPI_CSI2_MAX_HEIGHT        2240
+#define MIPI_CSI2_MIN_HEIGHT        120
+#define MIPI_CSI2_DEFAULT_WIDTH     1920
+#define MIPI_CSI2_DEFAULT_HEIGHT    1080
+#define MIPI_CSI2_DEFAULT_FMT       MEDIA_BUS_FMT_SRGGB10_1X10
+
+/* C3 CSI-2 pad list */
+enum {
+	MIPI_CSI2_PAD_SINK,
+	MIPI_CSI2_PAD_SRC,
+	MIPI_CSI2_PAD_MAX
+};
+
+/**
+ * struct csi_info - MIPI CSI2 information
+ *
+ * @clocks: array of MIPI CSI2 clock names
+ * @clock_rates: array of MIPI CSI2 clock rate
+ * @clock_num: actual clock number
+ */
+struct csi_info {
+	char *clocks[MIPI_CSI2_CLOCK_NUM_MAX];
+	u32 clock_rates[MIPI_CSI2_CLOCK_NUM_MAX];
+	u32 clock_num;
+};
+
+/**
+ * struct csi_device - MIPI CSI2 platform device
+ *
+ * @dev: pointer to the struct device
+ * @aphy: MIPI CSI2 aphy register address
+ * @dphy: MIPI CSI2 dphy register address
+ * @host: MIPI CSI2 host register address
+ * @clks: array of MIPI CSI2 clocks
+ * @sd: MIPI CSI2 sub-device
+ * @pads: MIPI CSI2 sub-device pads
+ * @notifier: notifier to register on the v4l2-async API
+ * @src_sd: source sub-device
+ * @bus: MIPI CSI2 bus information
+ * @src_sd_pad: source sub-device pad
+ * @lock: protect MIPI CSI2 device
+ * @info: version-specific MIPI CSI2 information
+ */
+struct csi_device {
+	struct device *dev;
+	void __iomem *aphy;
+	void __iomem *dphy;
+	void __iomem *host;
+	struct clk_bulk_data clks[MIPI_CSI2_CLOCK_NUM_MAX];
+
+	struct v4l2_subdev sd;
+	struct media_pad pads[MIPI_CSI2_PAD_MAX];
+	struct v4l2_async_notifier notifier;
+	struct v4l2_subdev *src_sd;
+	struct v4l2_mbus_config_mipi_csi2 bus;
+
+	u16 src_sd_pad;
+	struct mutex lock; /* Protect csi device */
+	const struct csi_info *info;
+};
+
+static const u32 c3_mipi_csi_formats[] = {
+	MEDIA_BUS_FMT_SBGGR10_1X10,
+	MEDIA_BUS_FMT_SGBRG10_1X10,
+	MEDIA_BUS_FMT_SGRBG10_1X10,
+	MEDIA_BUS_FMT_SRGGB10_1X10,
+	MEDIA_BUS_FMT_SBGGR12_1X12,
+	MEDIA_BUS_FMT_SGBRG12_1X12,
+	MEDIA_BUS_FMT_SGRBG12_1X12,
+	MEDIA_BUS_FMT_SRGGB12_1X12,
+};
+
+/* Hardware configuration */
+
+static void c3_mipi_csi_write(struct csi_device *csi, u32 reg, u32 val)
+{
+	void __iomem *addr;
+
+	switch (CSI2_SUBMD(reg)) {
+	case SUBMD_APHY:
+		addr = csi->aphy + CSI2_REG_ADDR(reg);
+		break;
+	case SUBMD_DPHY:
+		addr = csi->dphy + CSI2_REG_ADDR(reg);
+		break;
+	case SUBMD_HOST:
+		addr = csi->host + CSI2_REG_ADDR(reg);
+		break;
+	default:
+		dev_err(csi->dev, "Invalid sub-module: %lu\n", CSI2_SUBMD(reg));
+		return;
+	}
+
+	writel(val, addr);
+}
+
+static void c3_mipi_csi_update_bits(struct csi_device *csi, u32 reg,
+				    u32 mask, u32 val)
+{
+	void __iomem *addr;
+	u32 orig, tmp;
+
+	switch (CSI2_SUBMD(reg)) {
+	case SUBMD_APHY:
+		addr = csi->aphy + CSI2_REG_ADDR(reg);
+		break;
+	case SUBMD_DPHY:
+		addr = csi->dphy + CSI2_REG_ADDR(reg);
+		break;
+	case SUBMD_HOST:
+		addr = csi->host + CSI2_REG_ADDR(reg);
+		break;
+	default:
+		dev_err(csi->dev, "Invalid sub-module: %lu\n", CSI2_SUBMD(reg));
+		return;
+	}
+
+	orig = readl(addr);
+	tmp = orig & ~mask;
+	tmp |= val & mask;
+
+	if (tmp != orig)
+		writel(tmp, addr);
+}
+
+static void c3_mipi_csi_cfg_aphy(struct csi_device *csi, u32 lanes)
+{
+	c3_mipi_csi_write(csi, MIPI_CSI_2M_PHY2_CNTL1, MIPI_APHY_NORMAL_CNTL1);
+
+	if (lanes == 4)
+		c3_mipi_csi_write(csi, MIPI_CSI_2M_PHY2_CNTL2, MIPI_APHY_4LANES_CNTL2);
+	else
+		c3_mipi_csi_write(csi, MIPI_CSI_2M_PHY2_CNTL2, MIPI_APHY_NORMAL_CNTL2);
+
+	if (lanes == 2)
+		c3_mipi_csi_write(csi, MIPI_CSI_2M_PHY2_CNTL3, MIPI_APHY_2LANES_CNTL3);
+}
+
+static void c3_mipi_csi_2lanes_setting(struct csi_device *csi)
+{
+	/* Disable lane 2 and lane 3 */
+	c3_mipi_csi_update_bits(csi, MIPI_PHY_MUX_CTRL0, MIPI_DPHY_LANE3_SELECT, 0xf);
+	c3_mipi_csi_update_bits(csi, MIPI_PHY_MUX_CTRL0, MIPI_DPHY_LANE2_SELECT,
+				0xf << MIPI_DPHY_LANE2_SELECT_SHIFT);
+	/* Select analog data lane 1 */
+	c3_mipi_csi_update_bits(csi, MIPI_PHY_MUX_CTRL0, MIPI_DPHY_LANE1_SELECT,
+				0x1 << MIPI_DPHY_LANE1_SELECT_SHIFT);
+	/* Select analog data lane 0 */
+	c3_mipi_csi_update_bits(csi, MIPI_PHY_MUX_CTRL0, MIPI_DPHY_LANE0_SELECT, 0x0);
+
+	/* Disable lane 2 and lane 3 control signal */
+	c3_mipi_csi_update_bits(csi, MIPI_PHY_MUX_CTRL1, MIPI_DPHY_LANE3_CTRL_SIGNAL, 0xf);
+	c3_mipi_csi_update_bits(csi, MIPI_PHY_MUX_CTRL1, MIPI_DPHY_LANE2_CTRL_SIGNAL,
+				0xf << MIPI_DPHY_LANE2_CTRL_SIGNAL_SHIFT);
+	/* Select lane 1 signal */
+	c3_mipi_csi_update_bits(csi, MIPI_PHY_MUX_CTRL1, MIPI_DPHY_LANE1_CTRL_SIGNAL,
+				0x1 << MIPI_DPHY_LANE1_CTRL_SIGNAL_SHIFT);
+	/* Select lane 0 signal */
+	c3_mipi_csi_update_bits(csi, MIPI_PHY_MUX_CTRL1, MIPI_DPHY_LANE0_CTRL_SIGNAL, 0x0);
+	/* Select input 0 as clock */
+	c3_mipi_csi_update_bits(csi, MIPI_PHY_MUX_CTRL1, MIPI_DPHY_CLK_SELECT,
+				MIPI_DPHY_CLK_SELECT);
+}
+
+static void c3_mipi_csi_4lanes_setting(struct csi_device *csi)
+{
+	/* Select analog data lane 3 */
+	c3_mipi_csi_update_bits(csi, MIPI_PHY_MUX_CTRL0, MIPI_DPHY_LANE3_SELECT, 0x3);
+	/* Select analog data lane 2 */
+	c3_mipi_csi_update_bits(csi, MIPI_PHY_MUX_CTRL0, MIPI_DPHY_LANE2_SELECT,
+				0x2 << MIPI_DPHY_LANE2_SELECT_SHIFT);
+	/* Select analog data lane 1 */
+	c3_mipi_csi_update_bits(csi, MIPI_PHY_MUX_CTRL0, MIPI_DPHY_LANE1_SELECT,
+				0x1 << MIPI_DPHY_LANE1_SELECT_SHIFT);
+	/* Select analog data lane 0 */
+	c3_mipi_csi_update_bits(csi, MIPI_PHY_MUX_CTRL0, MIPI_DPHY_LANE0_SELECT, 0x0);
+
+	/* Select lane 3 signal */
+	c3_mipi_csi_update_bits(csi, MIPI_PHY_MUX_CTRL1, MIPI_DPHY_LANE3_CTRL_SIGNAL, 0x3);
+	/* Select lane 2 signal */
+	c3_mipi_csi_update_bits(csi, MIPI_PHY_MUX_CTRL1, MIPI_DPHY_LANE2_CTRL_SIGNAL,
+				0x2 << MIPI_DPHY_LANE2_CTRL_SIGNAL_SHIFT);
+	/* Select lane 1 signal */
+	c3_mipi_csi_update_bits(csi, MIPI_PHY_MUX_CTRL1, MIPI_DPHY_LANE1_CTRL_SIGNAL,
+				0x1 << MIPI_DPHY_LANE1_CTRL_SIGNAL_SHIFT);
+	/* Select lane 0 signal */
+	c3_mipi_csi_update_bits(csi, MIPI_PHY_MUX_CTRL1, MIPI_DPHY_LANE0_CTRL_SIGNAL, 0x0);
+	/* Select input 0 as clock */
+	c3_mipi_csi_update_bits(csi, MIPI_PHY_MUX_CTRL1, MIPI_DPHY_CLK_SELECT,
+				MIPI_DPHY_CLK_SELECT);
+}
+
+static void c3_mipi_csi_cfg_dphy(struct csi_device *csi, u32 lanes, s64 rate)
+{
+	u32 val;
+	u32 settle;
+
+	/* Calculate the high speed settle */
+	val = DIV_ROUND_UP(1000000000, rate);
+	settle = (16 * val + 230) / 10;
+
+	c3_mipi_csi_write(csi, MIPI_PHY_CLK_LANE_CTRL, MIPI_DPHY_CLK_CONTINUE_MODE);
+	c3_mipi_csi_write(csi, MIPI_PHY_TCLK_MISS, MIPI_DPHY_CLK_MISS);
+	c3_mipi_csi_write(csi, MIPI_PHY_TCLK_SETTLE, MIPI_DPHY_CLK_SETTLE);
+	c3_mipi_csi_write(csi, MIPI_PHY_THS_EXIT, MIPI_DPHY_HS_EXIT);
+	c3_mipi_csi_write(csi, MIPI_PHY_THS_SKIP, MIPI_DPHY_HS_SKIP);
+	c3_mipi_csi_write(csi, MIPI_PHY_THS_SETTLE, settle);
+	c3_mipi_csi_write(csi, MIPI_PHY_TINIT, MIPI_DPHY_INIT_CYCLES);
+	c3_mipi_csi_write(csi, MIPI_PHY_TMBIAS, MIPI_DPHY_MBIAS_CYCLES);
+	c3_mipi_csi_write(csi, MIPI_PHY_TULPS_C, MIPI_DPHY_ULPS_CHECK_CYCLES);
+	c3_mipi_csi_write(csi, MIPI_PHY_TULPS_S, MIPI_DPHY_ULPS_START_CYCLES);
+	c3_mipi_csi_write(csi, MIPI_PHY_TLP_EN_W, MIPI_DPHY_ULPS_STOP_CYCLES);
+	c3_mipi_csi_write(csi, MIPI_PHY_TLPOK, MIPI_DPHY_POWER_UP_CYCLES);
+	c3_mipi_csi_write(csi, MIPI_PHY_TWD_INIT, MIPI_DPHY_INIT_WATCH_DOG);
+	c3_mipi_csi_write(csi, MIPI_PHY_TWD_HS, MIPI_DPHY_HS_WATCH_DOG);
+	c3_mipi_csi_write(csi, MIPI_PHY_DATA_LANE_CTRL, MIPI_DPHY_LANE_CTRL_DISABLE);
+
+	c3_mipi_csi_update_bits(csi, MIPI_PHY_DATA_LANE_CTRL1, MIPI_DPHY_INSERT_ERRESC,
+				MIPI_DPHY_INSERT_ERRESC);
+	c3_mipi_csi_update_bits(csi, MIPI_PHY_DATA_LANE_CTRL1, MIPI_DPHY_HS_SYNC_CHECK,
+				MIPI_DPHY_HS_SYNC_CHECK);
+	/*
+	 * Set 5 pipe lines to the same high speed.
+	 * Each bit for one pipe line.
+	 */
+	c3_mipi_csi_update_bits(csi, MIPI_PHY_DATA_LANE_CTRL1, MIPI_DPHY_FIVE_HS_PIPE,
+				0x1f << MIPI_DPHY_FIVE_HS_PIPE_SHIFT);
+
+	/* Output data with pipe line data. */
+	c3_mipi_csi_update_bits(csi, MIPI_PHY_DATA_LANE_CTRL1, MIPI_DPHY_DATA_PIPE_SELECT,
+				0x3 << MIPI_DPHY_DATA_PIPE_SELECT_SHIFT);
+	if (lanes == 2)
+		c3_mipi_csi_2lanes_setting(csi);
+	else
+		c3_mipi_csi_4lanes_setting(csi);
+
+	/* Enable digital data and clock lanes */
+	c3_mipi_csi_write(csi, MIPI_PHY_CTRL, MIPI_DPHY_LANES_ENABLE);
+}
+
+static void c3_mipi_csi_cfg_host(struct csi_device *csi, u32 lanes)
+{
+	/* Reset CSI-2 controller output */
+	c3_mipi_csi_write(csi, CSI2_HOST_CSI2_RESETN, CSI2_HOST_RESETN_DEFAULT);
+	c3_mipi_csi_write(csi, CSI2_HOST_CSI2_RESETN, CSI2_HOST_RESETN_RST_VALUE);
+
+	/* Set data lane number */
+	c3_mipi_csi_write(csi, CSI2_HOST_N_LANES, lanes - 1);
+
+	/* Enable error mask */
+	c3_mipi_csi_write(csi, CSI2_HOST_MASK1, CSI2_HOST_ERROR_MASK1);
+}
+
+static int c3_mipi_csi_start_stream(struct csi_device *csi)
+{
+	s64 link_freq;
+	s64 lane_rate;
+
+	link_freq = v4l2_get_link_freq(csi->src_sd->ctrl_handler, 0, 0);
+	if (link_freq < 0) {
+		dev_err(csi->dev, "Unable to obtain link frequency: %lld\n", link_freq);
+		return link_freq;
+	}
+
+	lane_rate = link_freq * 2;
+	if (lane_rate > 1500000000)
+		return -EINVAL;
+
+	c3_mipi_csi_cfg_aphy(csi, csi->bus.num_data_lanes);
+	c3_mipi_csi_cfg_dphy(csi, csi->bus.num_data_lanes, lane_rate);
+	c3_mipi_csi_cfg_host(csi, csi->bus.num_data_lanes);
+
+	return 0;
+}
+
+static int c3_mipi_csi_enable_streams(struct v4l2_subdev *sd,
+				      struct v4l2_subdev_state *state,
+				      u32 pad, u64 streams_mask)
+{
+	struct csi_device *csi = v4l2_get_subdevdata(sd);
+	u64 sink_streams;
+	int ret;
+
+	guard(mutex)(&csi->lock);
+
+	pm_runtime_resume_and_get(csi->dev);
+
+	c3_mipi_csi_start_stream(csi);
+
+	sink_streams = v4l2_subdev_state_xlate_streams(state, pad,
+						       MIPI_CSI2_PAD_SINK,
+						       &streams_mask);
+	ret = v4l2_subdev_enable_streams(csi->src_sd,
+					 csi->src_sd_pad,
+					 sink_streams);
+	if (ret) {
+		pm_runtime_put(csi->dev);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int c3_mipi_csi_disable_streams(struct v4l2_subdev *sd,
+				       struct v4l2_subdev_state *state,
+				       u32 pad, u64 streams_mask)
+{
+	struct csi_device *csi = v4l2_get_subdevdata(sd);
+	u64 sink_streams;
+	int ret;
+
+	guard(mutex)(&csi->lock);
+
+	sink_streams = v4l2_subdev_state_xlate_streams(state, pad,
+						       MIPI_CSI2_PAD_SINK,
+						       &streams_mask);
+	ret = v4l2_subdev_disable_streams(csi->src_sd,
+					  csi->src_sd_pad,
+					  sink_streams);
+	if (ret)
+		dev_err(csi->dev, "Failed to disable %s\n", csi->src_sd->name);
+
+	pm_runtime_put(csi->dev);
+
+	return ret;
+}
+
+static int c3_mipi_csi_cfg_routing(struct v4l2_subdev *sd,
+				   struct v4l2_subdev_state *state,
+				   struct v4l2_subdev_krouting *routing)
+{
+	static const struct v4l2_mbus_framefmt format = {
+		.width = MIPI_CSI2_DEFAULT_WIDTH,
+		.height = MIPI_CSI2_DEFAULT_HEIGHT,
+		.code = MIPI_CSI2_DEFAULT_FMT,
+		.field = V4L2_FIELD_NONE,
+		.colorspace = V4L2_COLORSPACE_RAW,
+		.ycbcr_enc = V4L2_YCBCR_ENC_601,
+		.quantization = V4L2_QUANTIZATION_LIM_RANGE,
+		.xfer_func = V4L2_XFER_FUNC_NONE,
+	};
+	int ret;
+
+	ret = v4l2_subdev_routing_validate(sd, routing,
+					   V4L2_SUBDEV_ROUTING_ONLY_1_TO_1);
+	if (ret)
+		return ret;
+
+	ret = v4l2_subdev_set_routing_with_fmt(sd, state, routing, &format);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int c3_mipi_csi_init_routing(struct v4l2_subdev *sd,
+				    struct v4l2_subdev_state *state)
+{
+	struct v4l2_subdev_route routes;
+	struct v4l2_subdev_krouting routing;
+
+	routes.sink_pad = MIPI_CSI2_PAD_SINK;
+	routes.sink_stream = 0;
+	routes.source_pad = MIPI_CSI2_PAD_SRC;
+	routes.source_stream = 0;
+	routes.flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE;
+
+	routing.num_routes = 1;
+	routing.routes = &routes;
+
+	return c3_mipi_csi_cfg_routing(sd, state, &routing);
+}
+
+static int c3_mipi_csi_set_routing(struct v4l2_subdev *sd,
+				   struct v4l2_subdev_state *state,
+				   enum v4l2_subdev_format_whence which,
+				   struct v4l2_subdev_krouting *routing)
+{
+	bool is_streaming = v4l2_subdev_is_streaming(sd);
+
+	if (which == V4L2_SUBDEV_FORMAT_ACTIVE && is_streaming)
+		return -EBUSY;
+
+	return c3_mipi_csi_cfg_routing(sd, state, routing);
+}
+
+static int c3_mipi_csi_enum_mbus_code(struct v4l2_subdev *sd,
+				      struct v4l2_subdev_state *state,
+				      struct v4l2_subdev_mbus_code_enum *code)
+{
+	switch (code->pad) {
+	case MIPI_CSI2_PAD_SINK:
+		if (code->index >= ARRAY_SIZE(c3_mipi_csi_formats))
+			return -EINVAL;
+
+		code->code = c3_mipi_csi_formats[code->index];
+		break;
+	case MIPI_CSI2_PAD_SRC:
+		struct v4l2_mbus_framefmt *fmt;
+
+		if (code->index > 0)
+			return -EINVAL;
+
+		fmt = v4l2_subdev_state_get_format(state, code->pad);
+		code->code = fmt->code;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int c3_mipi_csi_set_fmt(struct v4l2_subdev *sd,
+			       struct v4l2_subdev_state *state,
+			       struct v4l2_subdev_format *format)
+{
+	struct v4l2_mbus_framefmt *fmt;
+	unsigned int i;
+
+	if (format->pad != MIPI_CSI2_PAD_SINK)
+		return v4l2_subdev_get_fmt(sd, state, format);
+
+	fmt = v4l2_subdev_state_get_format(state, format->pad);
+
+	for (i = 0; i < ARRAY_SIZE(c3_mipi_csi_formats); i++)
+		if (format->format.code == c3_mipi_csi_formats[i])
+			break;
+
+	if (i == ARRAY_SIZE(c3_mipi_csi_formats))
+		fmt->code = c3_mipi_csi_formats[0];
+	else
+		fmt->code = c3_mipi_csi_formats[i];
+
+	fmt->width = clamp_t(u32, format->format.width,
+			     MIPI_CSI2_MIN_WIDTH, MIPI_CSI2_MAX_WIDTH);
+	fmt->height = clamp_t(u32, format->format.height,
+			      MIPI_CSI2_MIN_HEIGHT, MIPI_CSI2_MAX_HEIGHT);
+
+	format->format = *fmt;
+
+	/* Synchronize the format to source pad */
+	fmt = v4l2_subdev_state_get_format(state, MIPI_CSI2_PAD_SRC);
+	*fmt = format->format;
+
+	return 0;
+}
+
+static int c3_mipi_csi_init_state(struct v4l2_subdev *sd,
+				  struct v4l2_subdev_state *state)
+{
+	struct v4l2_mbus_framefmt *sink_fmt;
+	struct v4l2_mbus_framefmt *src_fmt;
+
+	sink_fmt = v4l2_subdev_state_get_format(state, MIPI_CSI2_PAD_SINK);
+	src_fmt = v4l2_subdev_state_get_format(state, MIPI_CSI2_PAD_SRC);
+
+	sink_fmt->width = MIPI_CSI2_DEFAULT_WIDTH;
+	sink_fmt->height = MIPI_CSI2_DEFAULT_HEIGHT;
+	sink_fmt->field = V4L2_FIELD_NONE;
+	sink_fmt->code = MIPI_CSI2_DEFAULT_FMT;
+	sink_fmt->colorspace = V4L2_COLORSPACE_RAW;
+	sink_fmt->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(sink_fmt->colorspace);
+	sink_fmt->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(sink_fmt->colorspace);
+	sink_fmt->quantization =
+		V4L2_MAP_QUANTIZATION_DEFAULT(false, sink_fmt->colorspace,
+					      sink_fmt->ycbcr_enc);
+	*src_fmt = *sink_fmt;
+
+	return c3_mipi_csi_init_routing(sd, state);
+}
+
+static const struct v4l2_subdev_pad_ops c3_mipi_csi_pad_ops = {
+	.enum_mbus_code = c3_mipi_csi_enum_mbus_code,
+	.get_fmt = v4l2_subdev_get_fmt,
+	.set_fmt = c3_mipi_csi_set_fmt,
+	.set_routing = c3_mipi_csi_set_routing,
+	.enable_streams = c3_mipi_csi_enable_streams,
+	.disable_streams = c3_mipi_csi_disable_streams,
+};
+
+static const struct v4l2_subdev_ops c3_mipi_csi_subdev_ops = {
+	.pad = &c3_mipi_csi_pad_ops,
+};
+
+static const struct v4l2_subdev_internal_ops c3_mipi_csi_internal_ops = {
+	.init_state = c3_mipi_csi_init_state,
+};
+
+/* Media entity operations */
+static const struct media_entity_operations c3_mipi_csi_entity_ops = {
+	.link_validate = v4l2_subdev_link_validate,
+};
+
+/* PM runtime */
+
+static int __maybe_unused c3_mipi_csi_runtime_suspend(struct device *dev)
+{
+	struct csi_device *csi = dev_get_drvdata(dev);
+
+	clk_bulk_disable_unprepare(csi->info->clock_num, csi->clks);
+
+	return 0;
+}
+
+static int __maybe_unused c3_mipi_csi_runtime_resume(struct device *dev)
+{
+	struct csi_device *csi = dev_get_drvdata(dev);
+
+	return clk_bulk_prepare_enable(csi->info->clock_num, csi->clks);
+}
+
+static const struct dev_pm_ops c3_mipi_csi_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				pm_runtime_force_resume)
+	SET_RUNTIME_PM_OPS(c3_mipi_csi_runtime_suspend,
+			   c3_mipi_csi_runtime_resume, NULL)
+};
+
+/* Probe/remove & platform driver */
+
+static int c3_mipi_csi_subdev_init(struct csi_device *csi)
+{
+	struct v4l2_subdev *sd = &csi->sd;
+	int ret;
+
+	v4l2_subdev_init(sd, &c3_mipi_csi_subdev_ops);
+	sd->owner = THIS_MODULE;
+	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+	sd->internal_ops = &c3_mipi_csi_internal_ops;
+	snprintf(sd->name, sizeof(sd->name), "%s", MIPI_CSI2_SUBDEV_NAME);
+
+	sd->entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
+	sd->entity.ops = &c3_mipi_csi_entity_ops;
+
+	sd->dev = csi->dev;
+	v4l2_set_subdevdata(sd, csi);
+
+	csi->pads[MIPI_CSI2_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
+	csi->pads[MIPI_CSI2_PAD_SRC].flags = MEDIA_PAD_FL_SOURCE;
+	ret = media_entity_pads_init(&sd->entity, MIPI_CSI2_PAD_MAX, csi->pads);
+	if (ret)
+		return ret;
+
+	ret = v4l2_subdev_init_finalize(sd);
+	if (ret) {
+		media_entity_cleanup(&sd->entity);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void c3_mipi_csi_subdev_deinit(struct csi_device *csi)
+{
+	v4l2_subdev_cleanup(&csi->sd);
+	media_entity_cleanup(&csi->sd.entity);
+}
+
+/* Subdev notifier register */
+static int c3_mipi_csi_notify_bound(struct v4l2_async_notifier *notifier,
+				    struct v4l2_subdev *sd,
+				    struct v4l2_async_connection *asc)
+{
+	struct csi_device *csi = v4l2_get_subdevdata(notifier->sd);
+	struct media_pad *sink = &csi->sd.entity.pads[MIPI_CSI2_PAD_SINK];
+	int ret;
+
+	ret = media_entity_get_fwnode_pad(&sd->entity,
+					  sd->fwnode, MEDIA_PAD_FL_SOURCE);
+	if (ret < 0) {
+		dev_err(csi->dev, "Failed to find pad for %s\n", sd->name);
+		return ret;
+	}
+
+	csi->src_sd = sd;
+	csi->src_sd_pad = ret;
+
+	return v4l2_create_fwnode_links_to_pad(sd, sink, MEDIA_LNK_FL_ENABLED |
+					       MEDIA_LNK_FL_IMMUTABLE);
+}
+
+static const struct v4l2_async_notifier_operations c3_mipi_csi_notify_ops = {
+	.bound = c3_mipi_csi_notify_bound,
+};
+
+static int c3_mipi_csi_async_register(struct csi_device *csi)
+{
+	struct v4l2_fwnode_endpoint vep = {
+		.bus_type = V4L2_MBUS_CSI2_DPHY,
+	};
+	struct v4l2_async_connection *asc;
+	struct fwnode_handle *ep;
+	int ret;
+
+	v4l2_async_subdev_nf_init(&csi->notifier, &csi->sd);
+
+	ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(csi->dev), 0, 0,
+					     FWNODE_GRAPH_ENDPOINT_NEXT);
+	if (!ep)
+		return -ENOTCONN;
+
+	ret = v4l2_fwnode_endpoint_parse(ep, &vep);
+	if (ret)
+		goto err_put_handle;
+
+	csi->bus = vep.bus.mipi_csi2;
+	if (csi->bus.num_data_lanes != 2 && csi->bus.num_data_lanes != 4)
+		goto err_put_handle;
+
+	asc = v4l2_async_nf_add_fwnode_remote(&csi->notifier, ep,
+					      struct v4l2_async_connection);
+	if (IS_ERR(asc)) {
+		ret = PTR_ERR(asc);
+		goto err_put_handle;
+	}
+
+	csi->notifier.ops = &c3_mipi_csi_notify_ops;
+	ret = v4l2_async_nf_register(&csi->notifier);
+	if (ret)
+		goto err_cleanup_nf;
+
+	ret = v4l2_async_register_subdev(&csi->sd);
+	if (ret)
+		goto err_unregister_nf;
+
+	fwnode_handle_put(ep);
+
+	return 0;
+
+err_unregister_nf:
+	v4l2_async_nf_unregister(&csi->notifier);
+err_cleanup_nf:
+	v4l2_async_nf_cleanup(&csi->notifier);
+err_put_handle:
+	fwnode_handle_put(ep);
+	return ret;
+}
+
+static void c3_mipi_csi_async_unregister(struct csi_device *csi)
+{
+	v4l2_async_unregister_subdev(&csi->sd);
+	v4l2_async_nf_unregister(&csi->notifier);
+	v4l2_async_nf_cleanup(&csi->notifier);
+}
+
+static int c3_mipi_csi_ioremap_resource(struct csi_device *csi)
+{
+	struct device *dev = csi->dev;
+	struct platform_device *pdev = to_platform_device(dev);
+
+	csi->aphy = devm_platform_ioremap_resource_byname(pdev, "aphy");
+	if (IS_ERR(csi->aphy))
+		return PTR_ERR(csi->aphy);
+
+	csi->dphy = devm_platform_ioremap_resource_byname(pdev, "dphy");
+	if (IS_ERR(csi->dphy))
+		return PTR_ERR(csi->dphy);
+
+	csi->host = devm_platform_ioremap_resource_byname(pdev, "host");
+	if (IS_ERR(csi->host))
+		return PTR_ERR(csi->host);
+
+	return 0;
+}
+
+static int c3_mipi_csi_configure_clocks(struct csi_device *csi)
+{
+	const struct csi_info *info = csi->info;
+	int ret;
+	u32 i;
+
+	for (i = 0; i < info->clock_num; i++)
+		csi->clks[i].id = info->clocks[i];
+
+	ret = devm_clk_bulk_get(csi->dev, info->clock_num, csi->clks);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < info->clock_num; i++) {
+		if (!info->clock_rates[i])
+			continue;
+		ret = clk_set_rate(csi->clks[i].clk, info->clock_rates[i]);
+		if (ret) {
+			dev_err(csi->dev, "Failed to set %s rate %u\n", info->clocks[i],
+				info->clock_rates[i]);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int c3_mipi_csi_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct csi_device *csi;
+	int ret;
+
+	csi = devm_kzalloc(dev, sizeof(*csi), GFP_KERNEL);
+	if (!csi)
+		return -ENOMEM;
+
+	csi->info = of_device_get_match_data(dev);
+	csi->dev = dev;
+
+	ret = c3_mipi_csi_ioremap_resource(csi);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to ioremap resource\n");
+
+	ret = c3_mipi_csi_configure_clocks(csi);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to configure clocks\n");
+
+	platform_set_drvdata(pdev, csi);
+
+	mutex_init(&csi->lock);
+	pm_runtime_enable(dev);
+
+	ret = c3_mipi_csi_subdev_init(csi);
+	if (ret)
+		goto err_disable_runtime_pm;
+
+	ret = c3_mipi_csi_async_register(csi);
+	if (ret)
+		goto err_deinit_subdev;
+
+	return 0;
+
+err_deinit_subdev:
+	c3_mipi_csi_subdev_deinit(csi);
+err_disable_runtime_pm:
+	pm_runtime_disable(dev);
+	mutex_destroy(&csi->lock);
+	return ret;
+};
+
+static void c3_mipi_csi_remove(struct platform_device *pdev)
+{
+	struct csi_device *csi = platform_get_drvdata(pdev);
+
+	c3_mipi_csi_async_unregister(csi);
+	c3_mipi_csi_subdev_deinit(csi);
+
+	pm_runtime_disable(&pdev->dev);
+	mutex_destroy(&csi->lock);
+};
+
+static const struct csi_info c3_mipi_csi_info = {
+	.clocks = {"vapb", "phy0"},
+	.clock_rates = {0, 200000000},
+	.clock_num = 2
+};
+
+static const struct of_device_id c3_mipi_csi_of_match[] = {
+	{ .compatible = "amlogic,c3-mipi-csi2",
+	  .data = &c3_mipi_csi_info,
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, c3_mipi_csi_of_match);
+
+static struct platform_driver c3_mipi_csi_driver = {
+	.probe = c3_mipi_csi_probe,
+	.remove = c3_mipi_csi_remove,
+	.driver = {
+		.name = "c3-mipi-csi2",
+		.of_match_table = c3_mipi_csi_of_match,
+		.pm = &c3_mipi_csi_pm_ops,
+	},
+};
+
+module_platform_driver(c3_mipi_csi_driver);
+
+MODULE_AUTHOR("Keke Li <keke.li@xxxxxxxxxxx>");
+MODULE_DESCRIPTION("Amlogic C3 MIPI CSI-2 receiver");
+MODULE_LICENSE("GPL");

-- 
2.46.1






[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux