On Fri, 13 Sep 2024 13:42:10 +0100
Adrián Larumbe <adrian.larumbe@xxxxxxxxxxxxx> wrote:
> In order to support UM in calculating rates of GPU utilisation, the current
> operating and maximum GPU clock frequencies must be recorded during device
> initialisation, and also during OPP state transitions.
>
> Signed-off-by: Adrián Larumbe <adrian.larumbe@xxxxxxxxxxxxx>
Reviewed-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
> ---
> drivers/gpu/drm/panthor/panthor_devfreq.c | 18 +++++++++++++++++-
> drivers/gpu/drm/panthor/panthor_device.h | 6 ++++++
> 2 files changed, 23 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/panthor/panthor_devfreq.c b/drivers/gpu/drm/panthor/panthor_devfreq.c
> index c6d3c327cc24..9d0f891b9b53 100644
> --- a/drivers/gpu/drm/panthor/panthor_devfreq.c
> +++ b/drivers/gpu/drm/panthor/panthor_devfreq.c
> @@ -62,14 +62,20 @@ static void panthor_devfreq_update_utilization(struct panthor_devfreq *pdevfreq)
> static int panthor_devfreq_target(struct device *dev, unsigned long *freq,
> u32 flags)
> {
> + struct panthor_device *ptdev = dev_get_drvdata(dev);
> struct dev_pm_opp *opp;
> + int err;
>
> opp = devfreq_recommended_opp(dev, freq, flags);
> if (IS_ERR(opp))
> return PTR_ERR(opp);
> dev_pm_opp_put(opp);
>
> - return dev_pm_opp_set_rate(dev, *freq);
> + err = dev_pm_opp_set_rate(dev, *freq);
> + if (!err)
> + ptdev->current_frequency = *freq;
> +
> + return err;
> }
>
> static void panthor_devfreq_reset(struct panthor_devfreq *pdevfreq)
> @@ -130,6 +136,7 @@ int panthor_devfreq_init(struct panthor_device *ptdev)
> struct panthor_devfreq *pdevfreq;
> struct dev_pm_opp *opp;
> unsigned long cur_freq;
> + unsigned long freq = ULONG_MAX;
> int ret;
>
> pdevfreq = drmm_kzalloc(&ptdev->base, sizeof(*ptdev->devfreq), GFP_KERNEL);
> @@ -161,6 +168,7 @@ int panthor_devfreq_init(struct panthor_device *ptdev)
> return PTR_ERR(opp);
>
> panthor_devfreq_profile.initial_freq = cur_freq;
> + ptdev->current_frequency = cur_freq;
>
> /* Regulator coupling only takes care of synchronizing/balancing voltage
> * updates, but the coupled regulator needs to be enabled manually.
> @@ -204,6 +212,14 @@ int panthor_devfreq_init(struct panthor_device *ptdev)
>
> dev_pm_opp_put(opp);
>
> + /* Find the fastest defined rate */
> + opp = dev_pm_opp_find_freq_floor(dev, &freq);
> + if (IS_ERR(opp))
> + return PTR_ERR(opp);
> + ptdev->fast_rate = freq;
> +
> + dev_pm_opp_put(opp);
> +
> /*
> * Setup default thresholds for the simple_ondemand governor.
> * The values are chosen based on experiments.
> diff --git a/drivers/gpu/drm/panthor/panthor_device.h b/drivers/gpu/drm/panthor/panthor_device.h
> index a48e30d0af30..2109905813e8 100644
> --- a/drivers/gpu/drm/panthor/panthor_device.h
> +++ b/drivers/gpu/drm/panthor/panthor_device.h
> @@ -184,6 +184,12 @@ struct panthor_device {
>
> /** @profile_mask: User-set profiling flags for job accounting. */
> u32 profile_mask;
> +
> + /** @current_frequency: Device clock frequency at present. Set by DVFS*/
> + unsigned long current_frequency;
> +
> + /** @fast_rate: Maximum device clock frequency. Set by DVFS */
> + unsigned long fast_rate;
> };
>
> /**
