On Wed, Sep 11, 2024 at 06:24:54PM GMT, Hans de Goede wrote:
> Hi Lorenzo,
>
> On 9/11/24 5:34 PM, Lorenzo Stoakes wrote:
> > Avoid nested min()/max() which results in egregious macro expansion.
> >
> > This issue was introduced by commit 867046cc7027 ("minmax: relax check to
> > allow comparison between unsigned arguments and signed constants") [2].
> >
> > Work has been done to address the issue of egregious min()/max() macro
> > expansion in commit 22f546873149 ("minmax: improve macro expansion and type
> > checking") and related, however it appears that some issues remain on more
> > tightly constrained systems.
> >
> > Adjust a few known-bad cases of deeply nested macros to avoid doing so to
> > mitigate this. Porting the patch first proposed in [1] to Linus's tree.
> >
> > Running an allmodconfig build using the methodology described in [2] we
> > observe a 35 MiB reduction in generated code.
> >
> > The difference is much more significant prior to recent minmax fixes which
> > were not backported. As per [1] prior these the reduction is more like 200
> > MiB.
> >
> > This resolves an issue with slackware 15.0 32-bit compilation as reported
> > by Richard Narron.
> >
> > Presumably the min/max fixups would be difficult to backport, this patch
> > should be easier and fix's Richard's problem in 5.15.
> >
> > [0]:https://lore.kernel.org/all/b97faef60ad24922b530241c5d7c933c@xxxxxxxxxxxxxxxx/
> > [1]:https://lore.kernel.org/lkml/5882b96e-1287-4390-8174-3316d39038ef@lucifer.local/
> > [2]:https://lore.kernel.org/linux-mm/36aa2cad-1db1-4abf-8dd2-fb20484aabc3@lucifer.local/
> >
> > Reported-by: Richard Narron <richard@xxxxxxxxxx>
> > Closes: https://lore.kernel.org/all/4a5321bd-b1f-1832-f0c-cea8694dc5aa@xxxxxxxxxx/
> > Fixes: 867046cc7027 ("minmax: relax check to allow comparison between unsigned arguments and signed constants")
> > Cc: stable@xxxxxxxxxxxxxxx
> > Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@xxxxxxxxxx>
>
> Thank you for your patch.
>
> I must say that I'm not a fan of that this is patching 3 totally
> unrelated files here in a single patch.
>
> This is e.g. going to be a problem if we need to revert one of
> the changes because of regressions...
>
> So I would prefer this to be split into 3 patches.
Well, I was doing this as a favour to Richard between other work so put
this together quickly, but you're right this is going to be a pain to
backport/revert if issues so absolutely - will do.
Since this is a hotfix I'm going to risk annoying people and shoot out
a v2 on same day as v1. Sorry in advance.
>
> One review comment for the atomisp bits inline / below.
>
> > ---
> > drivers/net/ethernet/marvell/mvpp2/mvpp2.h | 2 +-
> > .../staging/media/atomisp/pci/sh_css_frac.h | 26 ++++++++++++++-----
> > include/linux/skbuff.h | 6 ++++-
> > 3 files changed, 25 insertions(+), 9 deletions(-)
> >
> > diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
> > index e809f91c08fb..8b431f90efc3 100644
> > --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
> > +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
> > @@ -23,7 +23,7 @@
> > /* The PacketOffset field is measured in units of 32 bytes and is 3 bits wide,
> > * so the maximum offset is 7 * 32 = 224
> > */
> > -#define MVPP2_SKB_HEADROOM min(max(XDP_PACKET_HEADROOM, NET_SKB_PAD), 224)
> > +#define MVPP2_SKB_HEADROOM clamp_t(int, XDP_PACKET_HEADROOM, NET_SKB_PAD, 224)
> >
> > #define MVPP2_XDP_PASS 0
> > #define MVPP2_XDP_DROPPED BIT(0)
> > diff --git a/drivers/staging/media/atomisp/pci/sh_css_frac.h b/drivers/staging/media/atomisp/pci/sh_css_frac.h
> > index b90b5b330dfa..a973394c5bc0 100644
> > --- a/drivers/staging/media/atomisp/pci/sh_css_frac.h
> > +++ b/drivers/staging/media/atomisp/pci/sh_css_frac.h
> > @@ -32,12 +32,24 @@
> > #define uISP_VAL_MAX ((unsigned int)((1 << uISP_REG_BIT) - 1))
> >
> > /* a:fraction bits for 16bit precision, b:fraction bits for ISP precision */
> > -#define sDIGIT_FITTING(v, a, b) \
> > - min_t(int, max_t(int, (((v) >> sSHIFT) >> max(sFRACTION_BITS_FITTING(a) - (b), 0)), \
> > - sISP_VAL_MIN), sISP_VAL_MAX)
> > -#define uDIGIT_FITTING(v, a, b) \
> > - min((unsigned int)max((unsigned)(((v) >> uSHIFT) \
> > - >> max((int)(uFRACTION_BITS_FITTING(a) - (b)), 0)), \
> > - uISP_VAL_MIN), uISP_VAL_MAX)
> > +static inline int sDIGIT_FITTING(short v, int a, int b)
> > +{
>
> drivers/staging/media/atomisp/pci/isp/kernels/s3a/s3a_1.0/ia_css_s3a.host.c
>
> calls this with ia_css_3a_config.af_fir1_coef / .af_fir2_coef
> as first argument those are of the ia_css_s0_15 type which is:
>
> /* Signed fixed point value, 0 integer bits, 15 fractional bits */
> typedef s32 ia_css_s0_15;
>
> please replace the "short v" with "int v"
Yeah I think you're right, it's odd, because it seems that the shift value
and the comments implies that this is a short, but perhaps it's more so
that values are shifted as to obtain 16 bits of precision.
>
> I think that you can then also replace clamp_t() with clamp()
The use of clamp_t() is to avoid egregious macro expansion in
clamp(). After the series improving min/max the clamp() is probably
equivalent. But in 5.15 it will likely not be. So this is, in line with the
purpose of this change, I believe necesasry.
>
>
> > + int fit_shift = sFRACTION_BITS_FITTING(a) - b;
> > +
> > + v >>= sSHIFT;
> > + v >>= fit_shift > 0 ? fit_shift : 0;
> > +
> > + return clamp_t(int, v, sISP_VAL_MIN, sISP_VAL_MAX);
> > +}
> > +
> > +static inline unsigned int uDIGIT_FITTING(unsigned int v, int a, int b)
> > +{
> > + int fit_shift = uFRACTION_BITS_FITTING(a) - b;
> > +
> > + v >>= uSHIFT;
> > + v >>= fit_shift > 0 ? fit_shift : 0;
> > +
> > + return clamp_t(unsigned int, v, uISP_VAL_MIN, uISP_VAL_MAX);
> > +}
>
> Regular clamp() should work here ? all parameters are already
> unsigned ints.
See above.
>
> Regards,
>
> Hans
>
>
>
>
> >
> > #endif /* __SH_CSS_FRAC_H */
> > diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
> > index 29c3ea5b6e93..d53b296df504 100644
> > --- a/include/linux/skbuff.h
> > +++ b/include/linux/skbuff.h
> > @@ -3164,7 +3164,11 @@ static inline int pskb_network_may_pull(struct sk_buff *skb, unsigned int len)
> > * NET_IP_ALIGN(2) + ethernet_header(14) + IP_header(20/40) + ports(8)
> > */
> > #ifndef NET_SKB_PAD
> > -#define NET_SKB_PAD max(32, L1_CACHE_BYTES)
> > +#if L1_CACHE_BYTES < 32
> > +#define NET_SKB_PAD 32
> > +#else
> > +#define NET_SKB_PAD L1_CACHE_BYTES
> > +#endif
> > #endif
> >
> > int ___pskb_trim(struct sk_buff *skb, unsigned int len);
> > --
> > 2.46.0
> >
>
