The TODO FIXME comment references the outdated lower limit for msleep() function of 20ms. As this is not right and the proper documentation of msleep() is now part of the function description, remove the old stuff and point to the up to date documentation. Cc: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx> Cc: linux-media@xxxxxxxxxxxxxxx Signed-off-by: Anna-Maria Behnsen <anna-maria@xxxxxxxxxxxxx> --- drivers/media/usb/dvb-usb-v2/anysee.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/media/usb/dvb-usb-v2/anysee.c b/drivers/media/usb/dvb-usb-v2/anysee.c index 8699846eb416..b2f5db961245 100644 --- a/drivers/media/usb/dvb-usb-v2/anysee.c +++ b/drivers/media/usb/dvb-usb-v2/anysee.c @@ -55,10 +55,8 @@ static int anysee_ctrl_msg(struct dvb_usb_device *d, /* TODO FIXME: dvb_usb_generic_rw() fails rarely with error code -32 * (EPIPE, Broken pipe). Function supports currently msleep() as a - * parameter but I would not like to use it, since according to - * Documentation/timers/timers-howto.rst it should not be used such - * short, under < 20ms, sleeps. Repeating failed message would be - * better choice as not to add unwanted delays... + * parameter. Check msleep() for details. Repeating failed message would + * be better choice as not to add unwanted delays... * Fixing that correctly is one of those or both; * 1) use repeat if possible * 2) add suitable delay -- 2.39.2
