From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> Hi All, This patch series aims to add the below features, - Support subdev active state - Support for streams - Support for virtual channel - Code cleanup Note, these patches are dependent on below: 1] https://patchwork.kernel.org/project/linux-media/patch/20240416193319.778192-27-sakari.ailus@xxxxxxxxxxxxxxx/ 2] https://patchwork.kernel.org/project/linux-media/patch/20240416193319.778192-26-sakari.ailus@xxxxxxxxxxxxxxx/ RFC->v2 - Dropped setting of VC using routes - Defaulted the native format to MEDIA_BUS_FMT_SBGGR8_1X8 - Fixed ov5645_enum_frame_size and ov5645_enum_mbus_code for internal image pad RFC patch, Link: https://lore.kernel.org/all/20240904210719.52466-1-prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx/ Test logs: ==================================== root@smarc-rzg2l:~# media-ctl -p ..... - entity 4: ov5645 0-003c (2 pads, 1 link, 1 route) type V4L2 subdev subtype Sensor flags 0 device node name /dev/v4l-subdev1 routes: 1/0 -> 0/0 [ACTIVE] pad0: SOURCE [stream:0 fmt:UYVY8_1X16/1920x1080 field:none colorspace:srgb crop:(0,0)/1920x1080] -> "csi-10830400.csi2":0 [ENABLED,IMMUTABLE] pad1: SINK,0x8 [stream:0 fmt:SBGGR8_1X8/2592x1944 field:none colorspace:srgb crop:(0,0)/1920x1080] ..... root@smarc-rzg2l:~# v4l2-ctl --device /dev/v4l-subdev1 --list-subdev-mbus-codes pad=0 ioctl: VIDIOC_SUBDEV_ENUM_MBUS_CODE (pad=0,stream=0) 0x200f: MEDIA_BUS_FMT_UYVY8_1X16 root@smarc-rzg2l:~# v4l2-ctl --device /dev/v4l-subdev1 --list-subdev-mbus-codes pad=1 ioctl: VIDIOC_SUBDEV_ENUM_MBUS_CODE (pad=1,stream=0) 0x3001: MEDIA_BUS_FMT_SBGGR8_1X8 root@smarc-rzg2l:~# v4l2-ctl --device /dev/v4l-subdev1 --list-subdev-framesizes pad=1,code=0x3001 ioctl: VIDIOC_SUBDEV_ENUM_FRAME_SIZE (pad=1,stream=0) Size Range: 2592x1944 - 2592x1944 root@smarc-rzg2l:~# v4l2-ctl --device /dev/v4l-subdev1 --list-subdev-framesizes pad=0,code=0x200f ioctl: VIDIOC_SUBDEV_ENUM_FRAME_SIZE (pad=0,stream=0) Size Range: 1280x960 - 1280x960 Size Range: 1920x1080 - 1920x1080 Size Range: 2592x1944 - 2592x1944 root@smarc-rzg2l:~# v4l2-compliance log: ------------------- root@smarc-rzg2l:~# v4l2-compliance -u /dev/v4l-subdev1 v4l2-compliance 1.28.1-5233, 64 bits, 64-bit time_t v4l2-compliance SHA: fc15e229d9d3 2024-07-23 19:22:15 Compliance test for device /dev/v[ 6347.789338] ov5645 0-003c: ================= START STATUS ================= 4l-subdev1: Driver In[ 6347.798197] ov5645 0-003c: ================== END STATUS ================== fo: Driver version : 6.11.0 Capabilities : 0x00000002 Streams Support Client Capabilities: 0x0000000000000003 streams interval-uses-which Required ioctls: test VIDIOC_SUDBEV_QUERYCAP: OK test invalid ioctls: OK Allow for multiple opens: test second /dev/v4l-subdev1 open: OK test VIDIOC_SUBDEV_QUERYCAP: OK test for unlimited opens: OK Debug ioctls: test VIDIOC_LOG_STATUS: OK (Not Supported) Input ioctls: test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) test VIDIOC_ENUMAUDIO: OK (Not Supported) test VIDIOC_G/S/ENUMINPUT: OK (Not Supported) test VIDIOC_G/S_AUDIO: OK (Not Supported) Inputs: 0 Audio Inputs: 0 Tuners: 0 Output ioctls: test VIDIOC_G/S_MODULATOR: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_ENUMAUDOUT: OK (Not Supported) test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) test VIDIOC_G/S_AUDOUT: OK (Not Supported) Outputs: 0 Audio Outputs: 0 Modulators: 0 Input/Output configuration ioctls: test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) test VIDIOC_G/S_EDID: OK (Not Supported) Sub-Device routing ioctls: test Try VIDIOC_SUBDEV_G_ROUTING/VIDIOC_SUBDEV_S_ROUTING: OK test Active VIDIOC_SUBDEV_G_ROUTING/VIDIOC_SUBDEV_S_ROUTING: OK Control ioctls: test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK test VIDIOC_QUERYCTRL: OK test VIDIOC_G/S_CTRL: OK test VIDIOC_G/S/TRY_EXT_CTRLS: OK test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) Standard Controls: 12 Private Controls: 0 Format ioctls: test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported) test VIDIOC_G/S_PARM: OK (Not Supported) test VIDIOC_G_FBUF: OK (Not Supported) test VIDIOC_G_FMT: OK (Not Supported) test VIDIOC_TRY_FMT: OK (Not Supported) test VIDIOC_S_FMT: OK (Not Supported) test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) test Cropping: OK (Not Supported) test Composing: OK (Not Supported) test Scaling: OK (Not Supported) Codec ioctls: test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) test VIDIOC_G_ENC_INDEX: OK (Not Supported) test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) Buffer ioctls: test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported) test CREATE_BUFS maximum buffers: OK test VIDIOC_REMOVE_BUFS: OK test VIDIOC_EXPBUF: OK (Not Supported) test Requests: OK (Not Supported) Total for device /dev/v4l-subdev1: 47, Succeeded: 47, Failed: 0, Warnings: 0 Lad Prabhakar (11): media: i2c: ov5645: Add V4L2_SUBDEV_FL_HAS_EVENTS and subscribe hooks media: i2c: ov5645: Use local `dev` pointer for subdev device assignment media: i2c: ov5645: Enable runtime PM after v4l2_async_register_subdev() media: i2c: ov5645: Use dev_err_probe instead of dev_err media: i2c: ov5645: Use v4l2_async_register_subdev_sensor() media: i2c: ov5645: Drop `power_lock` mutex media: i2c: ov5645: Use subdev active state media: i2c: ov5645: Switch to {enable,disable}_streams media: i2c: ov5645: Add internal image sink pad media: i2c: ov5645: Report internal routes to userspace media: i2c: ov5645: Report streams using frame descriptors drivers/media/i2c/ov5645.c | 433 ++++++++++++++++++++----------------- 1 file changed, 240 insertions(+), 193 deletions(-) -- 2.34.1
