Hi Keke, thanks for the patch
On 09/09/2024 08:24, Keke Li via B4 Relay wrote:
From: Keke Li <keke.li@xxxxxxxxxxx>
This driver is used to receive mipi data from image sensor.
Signed-off-by: Keke Li <keke.li@xxxxxxxxxxx>
---
MAINTAINERS | 7 +
drivers/media/platform/amlogic/Kconfig | 1 +
drivers/media/platform/amlogic/Makefile | 2 +
.../media/platform/amlogic/c3-mipi-csi2/Kconfig | 16 +
.../media/platform/amlogic/c3-mipi-csi2/Makefile | 3 +
.../platform/amlogic/c3-mipi-csi2/c3-mipi-csi2.c | 937 +++++++++++++++++++++
6 files changed, 966 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 0a3d9e17295a..de6e25b0eb09 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4887,6 +4887,13 @@ S: Maintained
F: Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml
F: drivers/net/can/bxcan.c
+C3 MIPI CSI2 DRIVER FOR AMLOGIC
+M: Keke Li <keke.li@xxxxxxxxxxx>
+L: linux-media@xxxxxxxxxxxxxxx
+S: Maintained
+F: Documentation/devicetree/bindings/media/amlogic,c3-mipi-csi2.yaml
+F: drivers/media/platform/amlogic/c3-mipi-csi2/
+
C-MEDIA CMI8788 DRIVER
M: Clemens Ladisch <clemens@xxxxxxxxxx>
L: alsa-devel@xxxxxxxxxxxxxxxx (moderated for non-subscribers)
diff --git a/drivers/media/platform/amlogic/Kconfig b/drivers/media/platform/amlogic/Kconfig
index 5014957404e9..b7c2de14848b 100644
--- a/drivers/media/platform/amlogic/Kconfig
+++ b/drivers/media/platform/amlogic/Kconfig
@@ -2,4 +2,5 @@
comment "Amlogic media platform drivers"
+source "drivers/media/platform/amlogic/c3-mipi-csi2/Kconfig"
source "drivers/media/platform/amlogic/meson-ge2d/Kconfig"
diff --git a/drivers/media/platform/amlogic/Makefile b/drivers/media/platform/amlogic/Makefile
index d3cdb8fa4ddb..4f571ce5d13e 100644
--- a/drivers/media/platform/amlogic/Makefile
+++ b/drivers/media/platform/amlogic/Makefile
@@ -1,2 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-only
+
+obj-y += c3-mipi-csi2/
obj-y += meson-ge2d/
diff --git a/drivers/media/platform/amlogic/c3-mipi-csi2/Kconfig b/drivers/media/platform/amlogic/c3-mipi-csi2/Kconfig
new file mode 100644
index 000000000000..0d7b2e203273
--- /dev/null
+++ b/drivers/media/platform/amlogic/c3-mipi-csi2/Kconfig
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+config VIDEO_C3_MIPI_CSI2
+ tristate "Amlogic C3 MIPI CSI-2 receiver"
+ depends on ARCH_MESON || COMPILE_TEST
+ depends on VIDEO_DEV
+ depends on OF
+ select MEDIA_CONTROLLER
+ select V4L2_FWNODE
+ select VIDEO_V4L2_SUBDEV_API
+ help
+ Video4Linux2 driver for Amlogic C3 MIPI CSI-2 receiver.
+ C3 MIPI CSI-2 receiver is used to receive MIPI data from
+ image sensor.
+
+ To compile this driver as a module choose m here.
diff --git a/drivers/media/platform/amlogic/c3-mipi-csi2/Makefile b/drivers/media/platform/amlogic/c3-mipi-csi2/Makefile
new file mode 100644
index 000000000000..cc08fc722bfd
--- /dev/null
+++ b/drivers/media/platform/amlogic/c3-mipi-csi2/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+obj-$(CONFIG_VIDEO_C3_MIPI_CSI2) += c3-mipi-csi2.o
diff --git a/drivers/media/platform/amlogic/c3-mipi-csi2/c3-mipi-csi2.c b/drivers/media/platform/amlogic/c3-mipi-csi2/c3-mipi-csi2.c
new file mode 100644
index 000000000000..c036be24fcff
--- /dev/null
+++ b/drivers/media/platform/amlogic/c3-mipi-csi2/c3-mipi-csi2.c
@@ -0,0 +1,937 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+/*
+ * Copyright (C) 2024 Amlogic, Inc. All rights reserved
+ */
+
+#include <linux/cleanup.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+#include <media/v4l2-async.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-fwnode.h>
+#include <media/v4l2-mc.h>
+#include <media/v4l2-subdev.h>
+
+/* C3 CSI-2 submodule definition */
+enum {
+ SUBMD_APHY,
+ SUBMD_DPHY,
+ SUBMD_HOST,
+};
+
+#define CSI2_SUBMD_MASK GENMASK(17, 16)
+#define CSI2_SUBMD_SHIFT 16
+#define CSI2_SUBMD(x) (((x) & (CSI2_SUBMD_MASK)) >> (CSI2_SUBMD_SHIFT))
+#define CSI2_REG_ADDR_MASK GENMASK(15, 0)
+#define CSI2_REG_ADDR(x) ((x) & (CSI2_REG_ADDR_MASK))
+#define CSI2_REG_A(x) ((SUBMD_APHY << CSI2_SUBMD_SHIFT) | (x))
+#define CSI2_REG_D(x) ((SUBMD_DPHY << CSI2_SUBMD_SHIFT) | (x))
+#define CSI2_REG_H(x) ((SUBMD_HOST << CSI2_SUBMD_SHIFT) | (x))
+
+#define MIPI_CSI2_CLOCK_NUM_MAX 3
+#define MIPI_CSI2_SUBDEV_NAME "mipi-csi2"
+
+/* C3 CSI-2 APHY register */
+#define MIPI_CSI_2M_PHY2_CNTL1 CSI2_REG_A(0x44)
+#define MIPI_APHY_NORMAL_CNTL1 0x3f425C00
+
+#define MIPI_CSI_2M_PHY2_CNTL2 CSI2_REG_A(0x48)
+#define MIPI_APHY_4LANES_CNTL2 0x033a0000
+#define MIPI_APHY_NORMAL_CNTL2 0x333a0000
+
+#define MIPI_CSI_2M_PHY2_CNTL3 CSI2_REG_A(0x4c)
+#define MIPI_APHY_2LANES_CNTL3 0x03800000
+
+/* C3 CSI-2 DPHY register */
+#define MIPI_PHY_CTRL CSI2_REG_D(0x00)
+#define MIPI_DPHY_LANES_ENABLE 0x0
+
+#define MIPI_PHY_CLK_LANE_CTRL CSI2_REG_D(0x04)
+#define MIPI_DPHY_CLK_CONTINUE_MODE 0x3d8
+
+#define MIPI_PHY_DATA_LANE_CTRL CSI2_REG_D(0x08)
+#define MIPI_DPHY_LANE_CTRL_DISABLE 0x0
+
+#define MIPI_PHY_DATA_LANE_CTRL1 CSI2_REG_D(0x0c)
+#define MIPI_DPHY_INSERT_ERRESC BIT(0)
+#define MIPI_DPHY_HS_SYNC_CHECK BIT(1)
+#define MIPI_DPHY_FIVE_HS_PIPE GENMASK(6, 2)
+#define MIPI_DPHY_FIVE_HS_PIPE_SHIFT 2
+#define MIPI_DPHY_DATA_PIPE_SELECT GENMASK(9, 7)
+#define MIPI_DPHY_DATA_PIPE_SELECT_SHIFT 7
+
+#define MIPI_PHY_TCLK_MISS CSI2_REG_D(0x10)
+#define MIPI_DPHY_CLK_MISS 0x9
+
+#define MIPI_PHY_TCLK_SETTLE CSI2_REG_D(0x14)
+#define MIPI_DPHY_CLK_SETTLE 0x1F
+
+#define MIPI_PHY_THS_EXIT CSI2_REG_D(0x18)
+#define MIPI_DPHY_HS_EXIT 0x8
+
+#define MIPI_PHY_THS_SKIP CSI2_REG_D(0x1c)
+#define MIPI_DPHY_HS_SKIP 0xa
+
+#define MIPI_PHY_THS_SETTLE CSI2_REG_D(0x20)
+#define MIPI_PHY_TINIT CSI2_REG_D(0x24)
+#define MIPI_DPHY_INIT_CYCLES 0x4e20
+
+#define MIPI_PHY_TULPS_C CSI2_REG_D(0x28)
+#define MIPI_DPHY_ULPS_CHECK_CYCLES 0x1000
+
+#define MIPI_PHY_TULPS_S CSI2_REG_D(0x2c)
+#define MIPI_DPHY_ULPS_START_CYCLES 0x100
+
+#define MIPI_PHY_TMBIAS CSI2_REG_D(0x30)
+#define MIPI_DPHY_MBIAS_CYCLES 0x100
+
+#define MIPI_PHY_TLP_EN_W CSI2_REG_D(0x34)
+#define MIPI_DPHY_ULPS_STOP_CYCLES 0xC
+
+#define MIPI_PHY_TLPOK CSI2_REG_D(0x38)
+#define MIPI_DPHY_POWER_UP_CYCLES 0x100
+
+#define MIPI_PHY_TWD_INIT CSI2_REG_D(0x3c)
+#define MIPI_DPHY_INIT_WATCH_DOG 0x400000
+
+#define MIPI_PHY_TWD_HS CSI2_REG_D(0x40)
+#define MIPI_DPHY_HS_WATCH_DOG 0x400000
+
+#define MIPI_PHY_MUX_CTRL0 CSI2_REG_D(0x284)
+#define MIPI_DPHY_LANE3_SELECT GENMASK(3, 0)
+#define MIPI_DPHY_LANE2_SELECT GENMASK(7, 4)
+#define MIPI_DPHY_LANE2_SELECT_SHIFT 4
+#define MIPI_DPHY_LANE1_SELECT GENMASK(11, 8)
+#define MIPI_DPHY_LANE1_SELECT_SHIFT 8
+#define MIPI_DPHY_LANE0_SELECT GENMASK(14, 12)
+
+#define MIPI_PHY_MUX_CTRL1 CSI2_REG_D(0x288)
+#define MIPI_DPHY_LANE3_CTRL_SIGNAL GENMASK(3, 0)
+#define MIPI_DPHY_LANE2_CTRL_SIGNAL GENMASK(7, 4)
+#define MIPI_DPHY_LANE2_CTRL_SIGNAL_SHIFT 4
+#define MIPI_DPHY_LANE1_CTRL_SIGNAL GENMASK(11, 8)
+#define MIPI_DPHY_LANE1_CTRL_SIGNAL_SHIFT 8
+#define MIPI_DPHY_LANE0_CTRL_SIGNAL GENMASK(14, 12)
+#define MIPI_DPHY_CLK_SELECT BIT(17)
+
+/* C3 CSI-2 HOST register */
+#define CSI2_HOST_N_LANES CSI2_REG_H(0x04)
+#define CSI2_HOST_CSI2_RESETN CSI2_REG_H(0x10)
+#define CSI2_HOST_RESETN_DEFAULT 0x0
+#define CSI2_HOST_RESETN_RST_VALUE BIT(0)
+
+#define CSI2_HOST_MASK1 CSI2_REG_H(0x28)
+#define CSI2_HOST_ERROR_MASK1 GENMASK(28, 0)
+
+#define MIPI_CSI2_MAX_WIDTH 2888
+#define MIPI_CSI2_MIN_WIDTH 160
+#define MIPI_CSI2_MAX_HEIGHT 2240
+#define MIPI_CSI2_MIN_HEIGHT 120
+#define MIPI_CSI2_DEFAULT_WIDTH 1920
+#define MIPI_CSI2_DEFAULT_HEIGHT 1080
+#define MIPI_CSI2_DEFAULT_FMT MEDIA_BUS_FMT_SRGGB10_1X10
+
+/* C3 CSI-2 pad list */
+enum {
+ MIPI_CSI2_PAD_SINK,
+ MIPI_CSI2_PAD_SRC,
+ MIPI_CSI2_PAD_MAX
+};
+
+/**
+ * struct csi_info - MIPI CSI2 information
+ *
+ * @clocks: array of MIPI CSI2 clock names
+ * @clock_rates: array of MIPI CSI2 clock rate
+ * @clock_num: actual clock number
+ */
+struct csi_info {
+ char *clocks[MIPI_CSI2_CLOCK_NUM_MAX];
+ u32 clock_rates[MIPI_CSI2_CLOCK_NUM_MAX];
+ u32 clock_num;
+};
+
+/**
+ * struct csi_device - MIPI CSI2 platform device
+ *
+ * @dev: pointer to the struct device
+ * @aphy: MIPI CSI2 aphy register address
+ * @dphy: MIPI CSI2 dphy register address
+ * @host: MIPI CSI2 host register address
+ * @clks: array of MIPI CSI2 clocks
+ * @sd: MIPI CSI2 sub-device
+ * @pads: MIPI CSI2 sub-device pads
+ * @notifier: notifier to register on the v4l2-async API
+ * @src_sd: source sub-device
+ * @bus: MIPI CSI2 bus information
+ * @src_sd_pad: source sub-device pad
+ * @lock: protect MIPI CSI2 device
+ * @info: version-specific MIPI CSI2 information
+ */
+struct csi_device {
+ struct device *dev;
+ void __iomem *aphy;
+ void __iomem *dphy;
+ void __iomem *host;
+ struct clk_bulk_data clks[MIPI_CSI2_CLOCK_NUM_MAX];
+
+ struct v4l2_subdev sd;
+ struct media_pad pads[MIPI_CSI2_PAD_MAX];
+ struct v4l2_async_notifier notifier;
+ struct v4l2_subdev *src_sd;
+ struct v4l2_mbus_config_mipi_csi2 bus;
+
+ u16 src_sd_pad;
+ struct mutex lock; /* Protect csi device */
+ const struct csi_info *info;
+};
+
+static const u32 c3_mipi_csi_formats[] = {
+ MEDIA_BUS_FMT_SBGGR10_1X10,
+ MEDIA_BUS_FMT_SGBRG10_1X10,
+ MEDIA_BUS_FMT_SGRBG10_1X10,
+ MEDIA_BUS_FMT_SRGGB10_1X10,
+ MEDIA_BUS_FMT_SBGGR12_1X12,
+ MEDIA_BUS_FMT_SGBRG12_1X12,
+ MEDIA_BUS_FMT_SGRBG12_1X12,
+ MEDIA_BUS_FMT_SRGGB12_1X12,
+};
+
+/* Hardware configuration */
+
+static int c3_mipi_csi_write(struct csi_device *csi, u32 reg, u32 val)
+{
+ void __iomem *addr;
+
+ switch (CSI2_SUBMD(reg)) {
+ case SUBMD_APHY:
+ addr = csi->aphy + CSI2_REG_ADDR(reg);
+ break;
+ case SUBMD_DPHY:
+ addr = csi->dphy + CSI2_REG_ADDR(reg);
+ break;
+ case SUBMD_HOST:
+ addr = csi->host + CSI2_REG_ADDR(reg);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ writel(val, addr);
+
+ return 0;
+}
+
+static int c3_mipi_csi_update_bits(struct csi_device *csi, u32 reg,
+ u32 mask, u32 val)
+{
+ void __iomem *addr;
+ u32 orig, tmp;
+
+ switch (CSI2_SUBMD(reg)) {
+ case SUBMD_APHY:
+ addr = csi->aphy + CSI2_REG_ADDR(reg);
+ break;
+ case SUBMD_DPHY:
+ addr = csi->dphy + CSI2_REG_ADDR(reg);
+ break;
+ case SUBMD_HOST:
+ addr = csi->host + CSI2_REG_ADDR(reg);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ orig = readl(addr);
+ tmp = orig & ~mask;
+ tmp |= val & mask;
+
+ if (tmp != orig)
+ writel(tmp, addr);
+
+ return 0;
+}
Given these can only fail if the register definitions in the driver are wrong, and you're not
checking them for success/failure in the callsites, I think that these two functions can return void
with a debug message if the switch reaches the default state.
+
+static void c3_mipi_csi_cfg_aphy(struct csi_device *csi, u32 lanes)
+{
+ c3_mipi_csi_write(csi, MIPI_CSI_2M_PHY2_CNTL1, MIPI_APHY_NORMAL_CNTL1);
+
+ if (lanes == 4)
+ c3_mipi_csi_write(csi, MIPI_CSI_2M_PHY2_CNTL2, MIPI_APHY_4LANES_CNTL2);
+ else
+ c3_mipi_csi_write(csi, MIPI_CSI_2M_PHY2_CNTL2, MIPI_APHY_NORMAL_CNTL2);
+
+ if (lanes == 2)
+ c3_mipi_csi_write(csi, MIPI_CSI_2M_PHY2_CNTL3, MIPI_APHY_2LANES_CNTL3);
+}
+
+static void c3_mipi_csi_2lanes_setting(struct csi_device *csi)
+{
+ /* Disable lane 2 and lane 3 */
+ c3_mipi_csi_update_bits(csi, MIPI_PHY_MUX_CTRL0,
+ MIPI_DPHY_LANE3_SELECT, 0xf);
+ c3_mipi_csi_update_bits(csi, MIPI_PHY_MUX_CTRL0,
+ MIPI_DPHY_LANE2_SELECT,
+ 0xf << MIPI_DPHY_LANE2_SELECT_SHIFT);
+ /* Select analog data lane 1 */
+ c3_mipi_csi_update_bits(csi, MIPI_PHY_MUX_CTRL0,
+ MIPI_DPHY_LANE1_SELECT,
+ 0x1 << MIPI_DPHY_LANE1_SELECT_SHIFT);
+ /* Select analog data lane 0 */
+ c3_mipi_csi_update_bits(csi, MIPI_PHY_MUX_CTRL0,
+ MIPI_DPHY_LANE0_SELECT, 0x0);
+
+ /* Disable lane 2 and lane 3 control signal */
+ c3_mipi_csi_update_bits(csi, MIPI_PHY_MUX_CTRL1,
+ MIPI_DPHY_LANE3_CTRL_SIGNAL, 0xf);
+ c3_mipi_csi_update_bits(csi, MIPI_PHY_MUX_CTRL1,
+ MIPI_DPHY_LANE2_CTRL_SIGNAL,
+ 0xf << MIPI_DPHY_LANE2_CTRL_SIGNAL_SHIFT);
+ /* Select lane 1 signal */
+ c3_mipi_csi_update_bits(csi, MIPI_PHY_MUX_CTRL1,
+ MIPI_DPHY_LANE1_CTRL_SIGNAL,
+ 0x1 << MIPI_DPHY_LANE1_CTRL_SIGNAL_SHIFT);
+ /* Select lane 0 signal */
+ c3_mipi_csi_update_bits(csi, MIPI_PHY_MUX_CTRL1,
+ MIPI_DPHY_LANE0_CTRL_SIGNAL, 0x0);
+ /* Select input 0 as clock */
+ c3_mipi_csi_update_bits(csi, MIPI_PHY_MUX_CTRL1,
+ MIPI_DPHY_CLK_SELECT,
+ MIPI_DPHY_CLK_SELECT);
+}
+
+static void c3_mipi_csi_4lanes_setting(struct csi_device *csi)
+{
+ /* Select analog data lane 3 */
+ c3_mipi_csi_update_bits(csi, MIPI_PHY_MUX_CTRL0,
+ MIPI_DPHY_LANE3_SELECT, 0x3);
+ /* Select analog data lane 2 */
+ c3_mipi_csi_update_bits(csi, MIPI_PHY_MUX_CTRL0,
+ MIPI_DPHY_LANE2_SELECT,
+ 0x2 << MIPI_DPHY_LANE2_SELECT_SHIFT);
+ /* Select analog data lane 1 */
+ c3_mipi_csi_update_bits(csi, MIPI_PHY_MUX_CTRL0,
+ MIPI_DPHY_LANE1_SELECT,
+ 0x1 << MIPI_DPHY_LANE1_SELECT_SHIFT);
+ /* Select analog data lane 0 */
+ c3_mipi_csi_update_bits(csi, MIPI_PHY_MUX_CTRL0,
+ MIPI_DPHY_LANE0_SELECT, 0x0);
+
+ /* Select lane 3 signal */
+ c3_mipi_csi_update_bits(csi, MIPI_PHY_MUX_CTRL1,
+ MIPI_DPHY_LANE3_CTRL_SIGNAL, 0x3);
+ /* Select lane 2 signal */
+ c3_mipi_csi_update_bits(csi, MIPI_PHY_MUX_CTRL1,
+ MIPI_DPHY_LANE2_CTRL_SIGNAL,
+ 0x2 << MIPI_DPHY_LANE2_CTRL_SIGNAL_SHIFT);
+ /* Select lane 1 signal */
+ c3_mipi_csi_update_bits(csi, MIPI_PHY_MUX_CTRL1,
+ MIPI_DPHY_LANE1_CTRL_SIGNAL,
+ 0x1 << MIPI_DPHY_LANE1_CTRL_SIGNAL_SHIFT);
+ /* Select lane 0 signal */
+ c3_mipi_csi_update_bits(csi, MIPI_PHY_MUX_CTRL1,
+ MIPI_DPHY_LANE0_CTRL_SIGNAL, 0x0);
+ /* Select input 0 as clock */
+ c3_mipi_csi_update_bits(csi, MIPI_PHY_MUX_CTRL1,
+ MIPI_DPHY_CLK_SELECT,
+ MIPI_DPHY_CLK_SELECT);
+}
+
+static void c3_mipi_csi_cfg_dphy(struct csi_device *csi, u32 lanes, s64 rate)
+{
+ u32 val;
+ u32 settle;
+
+ /* Calculate the high speed settle */
+ val = DIV_ROUND_UP(1000000000, rate);
+ settle = (16 * val + 230) / 10;
+
+ c3_mipi_csi_write(csi, MIPI_PHY_CLK_LANE_CTRL, MIPI_DPHY_CLK_CONTINUE_MODE);
+ c3_mipi_csi_write(csi, MIPI_PHY_TCLK_MISS, MIPI_DPHY_CLK_MISS);
+ c3_mipi_csi_write(csi, MIPI_PHY_TCLK_SETTLE, MIPI_DPHY_CLK_SETTLE);
+ c3_mipi_csi_write(csi, MIPI_PHY_THS_EXIT, MIPI_DPHY_HS_EXIT);
+ c3_mipi_csi_write(csi, MIPI_PHY_THS_SKIP, MIPI_DPHY_HS_SKIP);
+ c3_mipi_csi_write(csi, MIPI_PHY_THS_SETTLE, settle);
+ c3_mipi_csi_write(csi, MIPI_PHY_TINIT, MIPI_DPHY_INIT_CYCLES);
+ c3_mipi_csi_write(csi, MIPI_PHY_TMBIAS, MIPI_DPHY_MBIAS_CYCLES);
+ c3_mipi_csi_write(csi, MIPI_PHY_TULPS_C, MIPI_DPHY_ULPS_CHECK_CYCLES);
+ c3_mipi_csi_write(csi, MIPI_PHY_TULPS_S, MIPI_DPHY_ULPS_START_CYCLES);
+ c3_mipi_csi_write(csi, MIPI_PHY_TLP_EN_W, MIPI_DPHY_ULPS_STOP_CYCLES);
+ c3_mipi_csi_write(csi, MIPI_PHY_TLPOK, MIPI_DPHY_POWER_UP_CYCLES);
+ c3_mipi_csi_write(csi, MIPI_PHY_TWD_INIT, MIPI_DPHY_INIT_WATCH_DOG);
+ c3_mipi_csi_write(csi, MIPI_PHY_TWD_HS, MIPI_DPHY_HS_WATCH_DOG);
+ c3_mipi_csi_write(csi, MIPI_PHY_DATA_LANE_CTRL, MIPI_DPHY_LANE_CTRL_DISABLE);
+
+ c3_mipi_csi_update_bits(csi, MIPI_PHY_DATA_LANE_CTRL1,
+ MIPI_DPHY_INSERT_ERRESC,
+ MIPI_DPHY_INSERT_ERRESC);
+ c3_mipi_csi_update_bits(csi, MIPI_PHY_DATA_LANE_CTRL1,
+ MIPI_DPHY_HS_SYNC_CHECK,
+ MIPI_DPHY_HS_SYNC_CHECK);
+ /*
+ * Set 5 pipe lines to the same high speed.
+ * Each bit for one pipe line.
+ */
+ c3_mipi_csi_update_bits(csi, MIPI_PHY_DATA_LANE_CTRL1,
+ MIPI_DPHY_FIVE_HS_PIPE,
+ 0x1f << MIPI_DPHY_FIVE_HS_PIPE_SHIFT);
+
+ /* Output data with pipe line data. */
+ c3_mipi_csi_update_bits(csi, MIPI_PHY_DATA_LANE_CTRL1,
+ MIPI_DPHY_DATA_PIPE_SELECT,
+ 0x3 << MIPI_DPHY_DATA_PIPE_SELECT_SHIFT);
+ if (lanes == 2)
+ c3_mipi_csi_2lanes_setting(csi);
+ else
+ c3_mipi_csi_4lanes_setting(csi);
+
+ /* Enable digital data and clock lanes */
+ c3_mipi_csi_write(csi, MIPI_PHY_CTRL, MIPI_DPHY_LANES_ENABLE);
+}
+
+static void c3_mipi_csi_cfg_host(struct csi_device *csi, u32 lanes)
+{
+ /* Reset CSI-2 controller output */
+ c3_mipi_csi_write(csi, CSI2_HOST_CSI2_RESETN, CSI2_HOST_RESETN_DEFAULT);
+ c3_mipi_csi_write(csi, CSI2_HOST_CSI2_RESETN, CSI2_HOST_RESETN_RST_VALUE);
+
+ /* Set data lane number */
+ c3_mipi_csi_write(csi, CSI2_HOST_N_LANES, lanes - 1);
+
+ /* Enable error mask */
+ c3_mipi_csi_write(csi, CSI2_HOST_MASK1, CSI2_HOST_ERROR_MASK1);
+}
+
+static int c3_mipi_csi_start_stream(struct csi_device *csi)
+{
+ s64 link_freq;
+ s64 lane_rate;
+
+ link_freq = v4l2_get_link_freq(csi->src_sd->ctrl_handler, 0, 0);
+ if (link_freq < 0) {
+ dev_err(csi->dev, "Unable to obtain link frequency: %lld\n", link_freq);
+ return link_freq;
+ }
+
+ lane_rate = link_freq * 2;
+ if (lane_rate > 1500000000)
+ return -EINVAL;
+
+ c3_mipi_csi_cfg_aphy(csi, csi->bus.num_data_lanes);
+ c3_mipi_csi_cfg_dphy(csi, csi->bus.num_data_lanes, lane_rate);
+ c3_mipi_csi_cfg_host(csi, csi->bus.num_data_lanes);
+
+ return 0;
+}
+
+static int c3_mipi_csi_enable_streams(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *state,
+ u32 pad, u64 streams_mask)
+{
+ struct csi_device *csi = v4l2_get_subdevdata(sd);
+ u64 sink_streams;
+ int ret;
+
+ guard(mutex)(&csi->lock);
+
+ pm_runtime_resume_and_get(csi->dev);
+
+ c3_mipi_csi_start_stream(csi);
+
+ sink_streams = v4l2_subdev_state_xlate_streams(state, pad,
+ MIPI_CSI2_PAD_SINK,
+ &streams_mask);
+ ret = v4l2_subdev_enable_streams(csi->src_sd,
+ csi->src_sd_pad,
+ sink_streams);
+ if (ret) {
+ pm_runtime_put(csi->dev);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int c3_mipi_csi_disable_streams(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *state,
+ u32 pad, u64 streams_mask)
+{
+ struct csi_device *csi = v4l2_get_subdevdata(sd);
+ u64 sink_streams;
+ int ret;
+
+ guard(mutex)(&csi->lock);
+
+ sink_streams = v4l2_subdev_state_xlate_streams(state, pad,
+ MIPI_CSI2_PAD_SINK,
+ &streams_mask);
+ ret = v4l2_subdev_disable_streams(csi->src_sd,
+ csi->src_sd_pad,
+ sink_streams);
+ if (ret)
+ dev_err(csi->dev, "Failed to disable %s\n", csi->src_sd->name);
+
+ pm_runtime_put(csi->dev);
+
+ return ret;
+}
+
+static int c3_mipi_csi_cfg_routing(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *state,
+ struct v4l2_subdev_krouting *routing)
+{
+ static const struct v4l2_mbus_framefmt format = {
+ .width = MIPI_CSI2_DEFAULT_WIDTH,
+ .height = MIPI_CSI2_DEFAULT_HEIGHT,
+ .code = MIPI_CSI2_DEFAULT_FMT,
+ .field = V4L2_FIELD_NONE,
+ .colorspace = V4L2_COLORSPACE_RAW,
+ .ycbcr_enc = V4L2_YCBCR_ENC_601,
+ .quantization = V4L2_QUANTIZATION_LIM_RANGE,
+ .xfer_func = V4L2_XFER_FUNC_NONE,
+ };
+ int ret;
+
+ ret = v4l2_subdev_routing_validate(sd, routing,
+ V4L2_SUBDEV_ROUTING_ONLY_1_TO_1);
+ if (ret)
+ return ret;
+
+ ret = v4l2_subdev_set_routing_with_fmt(sd, state, routing, &format);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int c3_mipi_csi_init_routing(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *state)
+{
+ struct v4l2_subdev_route routes;
+ struct v4l2_subdev_krouting routing;
+
+ routes.sink_pad = MIPI_CSI2_PAD_SINK;
+ routes.sink_stream = 0;
+ routes.source_pad = MIPI_CSI2_PAD_SRC;
+ routes.source_stream = 0;
+ routes.flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE;
+
+ routing.num_routes = 1;
+ routing.routes = &routes;
+
+ return c3_mipi_csi_cfg_routing(sd, state, &routing);
+}
+
+static int c3_mipi_csi_set_routing(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *state,
+ enum v4l2_subdev_format_whence which,
+ struct v4l2_subdev_krouting *routing)
+{
+ bool is_streaming = v4l2_subdev_is_streaming(sd);
+
+ if (which == V4L2_SUBDEV_FORMAT_ACTIVE && is_streaming)
+ return -EBUSY;
+
+ return c3_mipi_csi_cfg_routing(sd, state, routing);
+}
+
+static int c3_mipi_csi_enum_mbus_code(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *state,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ switch (code->pad) {
+ case MIPI_CSI2_PAD_SINK:
+ if (code->index >= ARRAY_SIZE(c3_mipi_csi_formats))
+ return -EINVAL;
+
+ code->code = c3_mipi_csi_formats[code->index];
+ break;
+ case MIPI_CSI2_PAD_SRC:
+ struct v4l2_mbus_framefmt *fmt;
+
+ if (code->index > 0)
+ return -EINVAL;
+
+ fmt = v4l2_subdev_state_get_format(state, code->pad);
+ code->code = fmt->code;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int c3_mipi_csi_set_fmt(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *state,
+ struct v4l2_subdev_format *format)
+{
+ struct v4l2_mbus_framefmt *fmt;
+ unsigned int i;
+
+ if (format->pad == MIPI_CSI2_PAD_SRC)
+ return v4l2_subdev_get_fmt(sd, state, format);
+
+ if (format->pad != MIPI_CSI2_PAD_SINK)
+ return -EINVAL;
perhaps just replace both if segments with
if (format->pad != MIPI_CSI2_PAD_SINK)
return v4l2_subdev_get_fmt(sd, state, format)
and rely on the function to return -EINVAL if the pad is wrong.
+
+ fmt = v4l2_subdev_state_get_format(state, format->pad);
+
+ for (i = 0; i < ARRAY_SIZE(c3_mipi_csi_formats); i++)
+ if (format->format.code == c3_mipi_csi_formats[i])
+ break;
+
+ if (i == ARRAY_SIZE(c3_mipi_csi_formats))
+ fmt->code = c3_mipi_csi_formats[0];
+ else
+ fmt->code = c3_mipi_csi_formats[i];
+
+ fmt->width = clamp_t(u32, format->format.width,
+ MIPI_CSI2_MIN_WIDTH, MIPI_CSI2_MAX_WIDTH);
+ fmt->height = clamp_t(u32, format->format.height,
+ MIPI_CSI2_MIN_HEIGHT, MIPI_CSI2_MAX_HEIGHT);
+
+ format->format = *fmt;
+
+ /* Synchronize the format to source pad */
+ fmt = v4l2_subdev_state_get_format(state, MIPI_CSI2_PAD_SRC);
+ *fmt = format->format;
+
+ return 0;
+}
+
+static int c3_mipi_csi_init_state(struct v4l2_subdev *sd,
+ struct v4l2_subdev_state *state)
+{
+ struct v4l2_mbus_framefmt *sink_fmt;
+ struct v4l2_mbus_framefmt *src_fmt;
+
+ sink_fmt = v4l2_subdev_state_get_format(state, MIPI_CSI2_PAD_SINK);
+ src_fmt = v4l2_subdev_state_get_format(state, MIPI_CSI2_PAD_SRC);
+
+ sink_fmt->width = MIPI_CSI2_DEFAULT_WIDTH;
+ sink_fmt->height = MIPI_CSI2_DEFAULT_HEIGHT;
+ sink_fmt->field = V4L2_FIELD_NONE;
+ sink_fmt->code = MIPI_CSI2_DEFAULT_FMT;
+ sink_fmt->colorspace = V4L2_COLORSPACE_RAW;
+ sink_fmt->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(sink_fmt->colorspace);
+ sink_fmt->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(sink_fmt->colorspace);
+ sink_fmt->quantization =
+ V4L2_MAP_QUANTIZATION_DEFAULT(false, sink_fmt->colorspace,
+ sink_fmt->ycbcr_enc);
+ *src_fmt = *sink_fmt;
+
+ return c3_mipi_csi_init_routing(sd, state);
+}
+
+static const struct v4l2_subdev_pad_ops c3_mipi_csi_pad_ops = {
+ .enum_mbus_code = c3_mipi_csi_enum_mbus_code,
+ .get_fmt = v4l2_subdev_get_fmt,
+ .set_fmt = c3_mipi_csi_set_fmt,
+ .set_routing = c3_mipi_csi_set_routing,
+ .enable_streams = c3_mipi_csi_enable_streams,
+ .disable_streams = c3_mipi_csi_disable_streams,
+};
+
+static const struct v4l2_subdev_ops c3_mipi_csi_subdev_ops = {
+ .pad = &c3_mipi_csi_pad_ops,
+};
+
+static const struct v4l2_subdev_internal_ops c3_mipi_csi_internal_ops = {
+ .init_state = c3_mipi_csi_init_state,
+};
+
+/* Media entity operations */
+static const struct media_entity_operations c3_mipi_csi_entity_ops = {
+ .link_validate = v4l2_subdev_link_validate,
+};
+
+/* PM runtime */
+
+static int __maybe_unused c3_mipi_csi_runtime_suspend(struct device *dev)
+{
+ struct csi_device *csi = dev_get_drvdata(dev);
+
+ clk_bulk_disable_unprepare(csi->info->clock_num, csi->clks);
+
+ return 0;
+}
+
+static int __maybe_unused c3_mipi_csi_runtime_resume(struct device *dev)
+{
+ struct csi_device *csi = dev_get_drvdata(dev);
+
+ return clk_bulk_prepare_enable(csi->info->clock_num, csi->clks);
+}
+
+static const struct dev_pm_ops c3_mipi_csi_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+ pm_runtime_force_resume)
+ SET_RUNTIME_PM_OPS(c3_mipi_csi_runtime_suspend,
+ c3_mipi_csi_runtime_resume, NULL)
+};
+
+/* Probe/remove & platform driver */
+
+static int c3_mipi_csi_subdev_init(struct csi_device *csi)
+{
+ struct v4l2_subdev *sd = &csi->sd;
+ int ret;
+
+ v4l2_subdev_init(sd, &c3_mipi_csi_subdev_ops);
+ sd->owner = THIS_MODULE;
+ sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+ sd->internal_ops = &c3_mipi_csi_internal_ops;
+ snprintf(sd->name, sizeof(sd->name), "%s", MIPI_CSI2_SUBDEV_NAME);
+
+ sd->entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
+ sd->entity.ops = &c3_mipi_csi_entity_ops;
+
+ sd->dev = csi->dev;
+ v4l2_set_subdevdata(sd, csi);
+
+ csi->pads[MIPI_CSI2_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
+ csi->pads[MIPI_CSI2_PAD_SRC].flags = MEDIA_PAD_FL_SOURCE;
+ ret = media_entity_pads_init(&sd->entity, MIPI_CSI2_PAD_MAX, csi->pads);
+ if (ret)
+ return ret;
+
+ ret = v4l2_subdev_init_finalize(sd);
+ if (ret) {
+ media_entity_cleanup(&sd->entity);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void c3_mipi_csi_subdev_deinit(struct csi_device *csi)
+{
+ v4l2_subdev_cleanup(&csi->sd);
+ media_entity_cleanup(&csi->sd.entity);
+}
+
+/* Subdev notifier register */
+static int c3_mipi_csi_notify_bound(struct v4l2_async_notifier *notifier,
+ struct v4l2_subdev *sd,
+ struct v4l2_async_connection *asc)
+{
+ struct csi_device *csi = v4l2_get_subdevdata(notifier->sd);
+ struct media_pad *sink = &csi->sd.entity.pads[MIPI_CSI2_PAD_SINK];
+ int ret;
+
+ ret = media_entity_get_fwnode_pad(&sd->entity,
+ sd->fwnode, MEDIA_PAD_FL_SOURCE);
+ if (ret < 0) {
+ dev_err(csi->dev, "Failed to find pad for %s\n", sd->name);
+ return ret;
+ }
+
+ csi->src_sd = sd;
+ csi->src_sd_pad = ret;
+
+ return v4l2_create_fwnode_links_to_pad(sd, sink, MEDIA_LNK_FL_ENABLED |
+ MEDIA_LNK_FL_IMMUTABLE);
+}
+
+static const struct v4l2_async_notifier_operations c3_mipi_csi_notify_ops = {
+ .bound = c3_mipi_csi_notify_bound,
+};
+
+static int c3_mipi_csi_async_register(struct csi_device *csi)
+{
+ struct v4l2_fwnode_endpoint vep = {
+ .bus_type = V4L2_MBUS_CSI2_DPHY,
+ };
+ struct v4l2_async_connection *asc;
+ struct fwnode_handle *ep;
+ int ret;
+
+ v4l2_async_subdev_nf_init(&csi->notifier, &csi->sd);
+
+ ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(csi->dev), 0, 0,
+ FWNODE_GRAPH_ENDPOINT_NEXT);
+ if (!ep)
+ return -ENOTCONN;
+
+ ret = v4l2_fwnode_endpoint_parse(ep, &vep);
+ if (ret)
+ goto err_put_handle;
+
+ csi->bus = vep.bus.mipi_csi2;
+ if (csi->bus.num_data_lanes != 2 && csi->bus.num_data_lanes != 4)
+ goto err_put_handle;
+
+ asc = v4l2_async_nf_add_fwnode_remote(&csi->notifier, ep,
+ struct v4l2_async_connection);
+ if (IS_ERR(asc)) {
+ ret = PTR_ERR(asc);
+ goto err_put_handle;
+ }
+
+ csi->notifier.ops = &c3_mipi_csi_notify_ops;
+ ret = v4l2_async_nf_register(&csi->notifier);
+ if (ret)
+ goto err_cleanup_nf;
+
+ ret = v4l2_async_register_subdev(&csi->sd);
+ if (ret)
+ goto err_unregister_nf;
+
+ fwnode_handle_put(ep);
+
+ return 0;
+
+err_unregister_nf:
+ v4l2_async_nf_unregister(&csi->notifier);
+err_cleanup_nf:
+ v4l2_async_nf_cleanup(&csi->notifier);
+err_put_handle:
+ fwnode_handle_put(ep);
+ return ret;
+}
+
+static void c3_mipi_csi_async_unregister(struct csi_device *csi)
+{
+ v4l2_async_unregister_subdev(&csi->sd);
+ v4l2_async_nf_unregister(&csi->notifier);
+ v4l2_async_nf_cleanup(&csi->notifier);
+}
+
+static int c3_mipi_csi_ioremap_resource(struct csi_device *csi)
+{
+ struct device *dev = csi->dev;
+ struct platform_device *pdev = to_platform_device(dev);
+
+ csi->aphy = devm_platform_ioremap_resource_byname(pdev, "aphy");
+ if (IS_ERR(csi->aphy))
+ return PTR_ERR(csi->aphy);
+
+ csi->dphy = devm_platform_ioremap_resource_byname(pdev, "dphy");
+ if (IS_ERR(csi->dphy))
+ return PTR_ERR(csi->dphy);
+
+ csi->host = devm_platform_ioremap_resource_byname(pdev, "host");
+ if (IS_ERR(csi->host))
+ return PTR_ERR(csi->host);
+
+ return 0;
+}
+
+static int c3_mipi_csi_configure_clocks(struct csi_device *csi)
+{
+ const struct csi_info *info = csi->info;
+ int ret;
+ u32 i;
+
+ for (i = 0; i < info->clock_num; i++)
+ csi->clks[i].id = info->clocks[i];
+
+ ret = devm_clk_bulk_get(csi->dev, info->clock_num, csi->clks);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < info->clock_num; i++) {
+ if (!info->clock_rates[i])
+ continue;
+ ret = clk_set_rate(csi->clks[i].clk, info->clock_rates[i]);
+ if (ret) {
+ dev_err(csi->dev, "Failed to set %s rate %u\n", info->clocks[i],
+ info->clock_rates[i]);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int c3_mipi_csi_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct csi_device *csi;
+ int ret;
+
+ csi = devm_kzalloc(dev, sizeof(*csi), GFP_KERNEL);
+ if (!csi)
+ return -ENOMEM;
+
+ csi->info = of_device_get_match_data(dev);
+ csi->dev = dev;
+
+ ret = c3_mipi_csi_ioremap_resource(csi);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to ioremap resource\n");
+
+ ret = c3_mipi_csi_configure_clocks(csi);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to configure clocks\n");
+
+ platform_set_drvdata(pdev, csi);
+
+ mutex_init(&csi->lock);
+ pm_runtime_enable(dev);
+
+ ret = c3_mipi_csi_subdev_init(csi);
+ if (ret)
+ goto err_disable_runtime_pm;
+
+ ret = c3_mipi_csi_async_register(csi);
+ if (ret)
+ goto err_deinit_subdev;
+
+ return 0;
+
+err_deinit_subdev:
+ c3_mipi_csi_subdev_deinit(csi);
+err_disable_runtime_pm:
+ pm_runtime_disable(dev);
+ mutex_destroy(&csi->lock);
+ return ret;
+};
+
+static void c3_mipi_csi_remove(struct platform_device *pdev)
+{
+ struct csi_device *csi = platform_get_drvdata(pdev);
+
+ c3_mipi_csi_async_unregister(csi);
+ c3_mipi_csi_subdev_deinit(csi);
+
+ pm_runtime_disable(&pdev->dev);
+ mutex_destroy(&csi->lock);
+};
+
+static const struct csi_info c3_mipi_csi_info = {
+ .clocks = {"vapb", "phy0"},
+ .clock_rates = {0, 200000000},
+ .clock_num = 2
+};
+
+static const struct of_device_id c3_mipi_csi_of_match[] = {
+ { .compatible = "amlogic,c3-mipi-csi2",
+ .data = &c3_mipi_csi_info,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, c3_mipi_csi_of_match);
+
+static struct platform_driver c3_mipi_csi_driver = {
+ .probe = c3_mipi_csi_probe,
+ .remove_new = c3_mipi_csi_remove,
I think back to just .remove() is fine now.
Reviewed-by: Daniel Scally <dan.scally@xxxxxxxxxxxxxxxx>
+ .driver = {
+ .name = "c3-mipi-csi2",
+ .of_match_table = c3_mipi_csi_of_match,
+ .pm = &c3_mipi_csi_pm_ops,
+ },
+};
+
+module_platform_driver(c3_mipi_csi_driver);
+
+MODULE_AUTHOR("Keke Li <keke.li@xxxxxxxxxxx>");
+MODULE_DESCRIPTION("Amlogic C3 MIPI CSI-2 receiver");
+MODULE_LICENSE("GPL");
