Hi All, With this patch I'm going to add some sysfs attributes to the alvium-csi2 driver. This patch adds the following sysfs attributes: - cci_register_layout_version: Shows current cci regs layout version of the camera. - csi_clock_mhz: Shows current alvium camera csi2 freq. - device_capabilities: Show the capabilities of the current camera. - device_guid: Shows the current device guid as programmed by the vendor during production. - device_version: Shows the version of the alvium hardware. - family_name: Shows the Alvium family name, like Alvium CSI-2, GM2, FP3, ... - genio: Generic camera input/output xfer for using user programmable part of the flash. Reading and writing camera's user programmable flash memory. - lane_count: Shows device current CSI2 camera's lanes number. - manufacturer_info: Shows manufacturer info as programmed by the vendor during production. - manufacturer_name: Shows manufacturer name as programmed by the vendor during production. - mode: As stated by the BCRM Ref Manual camera can work in 2 modes BCM/GENCP. This attribute is responsible for switching the camera mode and check the current mode. - model_name: Shows model name as programmed by the vendor during production. - serial_number: Shows camera serial number as programmed by the vendor during production. - user_defined_name: Shows camera user defined name as programmed by the vendor during production. Thanks & Regards, Tommaso Tommaso Merciai (1): media: i2c: alvium: add camera sysfs attributes drivers/media/i2c/alvium-csi2.c | 484 ++++++++++++++++++++++++++++++++ drivers/media/i2c/alvium-csi2.h | 25 ++ 2 files changed, 509 insertions(+) -- 2.34.1
