Add the yaml binding for ARM's Mali-C55 Image Signal Processor. Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> Acked-by: Nayden Kanchev <nayden.kanchev@xxxxxxx> Co-developed-by: Jacopo Mondi <jacopo.mondi@xxxxxxxxxxxxxxxx> Signed-off-by: Jacopo Mondi <jacopo.mondi@xxxxxxxxxxxxxxxx> Signed-off-by: Daniel Scally <dan.scally@xxxxxxxxxxxxxxxx> --- Changes in v7: - None Changes in v6: - None Changes in v5: - None Changes in v4: - Switched to port instead of ports Changes in v3: - Dropped the video clock as suggested by Laurent. I didn't retain it for the purposes of the refcount since this driver will call .s_stream() for the sensor driver which will refcount the clock anyway. - Clarified that the port is a parallel input port rather (Sakari) Changes in v2: - Added clocks information - Fixed the warnings raised by Rob .../bindings/media/arm,mali-c55.yaml | 66 +++++++++++++++++++ 1 file changed, 66 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/arm,mali-c55.yaml diff --git a/Documentation/devicetree/bindings/media/arm,mali-c55.yaml b/Documentation/devicetree/bindings/media/arm,mali-c55.yaml new file mode 100644 index 000000000000..9cc2481f2da3 --- /dev/null +++ b/Documentation/devicetree/bindings/media/arm,mali-c55.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/arm,mali-c55.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Mali-C55 Image Signal Processor + +maintainers: + - Daniel Scally <dan.scally@xxxxxxxxxxxxxxxx> + - Jacopo Mondi <jacopo.mondi@xxxxxxxxxxxxxxxx> + +properties: + compatible: + const: arm,mali-c55 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: ISP AXI clock + - description: ISP AHB-lite clock + + clock-names: + items: + - const: aclk + - const: hclk + + port: + $ref: /schemas/graph.yaml#/properties/port + description: Input parallel video bus + + properties: + endpoint: + $ref: /schemas/graph.yaml#/properties/endpoint + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - port + +additionalProperties: false + +examples: + - | + mali_c55: isp@400000 { + compatible = "arm,mali-c55"; + reg = <0x400000 0x200000>; + clocks = <&clk 0>, <&clk 1>; + clock-names = "aclk", "hclk"; + interrupts = <0>; + + port { + isp_in: endpoint { + remote-endpoint = <&csi2_rx_out>; + }; + }; + }; +... -- 2.34.1
