On 05/09/2024 00:07, Prabhakar wrote:
From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
Hi All,
This patch series aims to add the below features,
- Support subdev active state
- Support for streams
- Support for virtual channel
- Code cleanup
Sending this is as an RFC, I've done limited testing and Im seeing issue
when route is updated and wanted some feedback on the implementation.
When route is updated for the sensor with below command, and when start
streaming I get "Dangling sink streams: mask 0x1" error. Should the
corresponding bridge also need to support routes to fix this? or is it
something missing Ive missed in the current implementation.
$ media-ctl -R "'ov5645 0-003c' [1/0->0/1[1]]"
Output after route update:
- entity 4: ov5645 0-003c (2 pads, 1 link, 1 route)
type V4L2 subdev subtype Sensor flags 0
device node name /dev/v4l-subdev1
routes:
1/0 -> 0/1 [ACTIVE]
pad0: SOURCE
[stream:1 fmt:UYVY8_1X16/1920x1080 field:none colorspace:srgb
crop:(0,0)/1920x1080]
-> "csi-10830400.csi2":0 [ENABLED,IMMUTABLE]
pad1: SINK,0x8
[stream:0 fmt:UYVY8_1X16/2592x1944 field:none colorspace:srgb
crop:(0,0)/1920x1080]
I think you actually want 1/0->0/0 routing. The error says that the sink
side device has routing which does not have a stream at stream ID 1, or
no routing support at all, which implies a single stream at stream ID 0.
Tomi
v4l2-compliance log after this patch series:
--------------------------------------------
root@smarc-rzg2l:~# v4l2-compliance -u /dev/v4l-subdev1
v4l2-compliance 1.28.1-5233, 64 bits, 64-bit time_t
v4l2-compliance SHA: fc15e229d9d3 2024-07-23 19:22:15
Compliance test for device /dev/v4l-subdev1:
Driver Info:
Driver version : 6.11.0
Capabilities : 0x00000002
Streams Support
Client Capabilities:[ 53.919041] ov5645 0-003c: ================= START STATUS =================
0x0000000000000[ 53.927271] ov5645 0-003c: ================== END STATUS ==================
003
streams interval-uses-which
Required ioctls:
test VIDIOC_SUDBEV_QUERYCAP: OK
test invalid ioctls: OK
Allow for multiple opens:
test second /dev/v4l-subdev1 open: OK
test VIDIOC_SUBDEV_QUERYCAP: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Sub-Device routing ioctls:
test Try VIDIOC_SUBDEV_G_ROUTING/VIDIOC_SUBDEV_S_ROUTING: OK
test Active VIDIOC_SUBDEV_G_ROUTING/VIDIOC_SUBDEV_S_ROUTING: OK
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 12 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK (Not Supported)
test VIDIOC_TRY_FMT: OK (Not Supported)
test VIDIOC_S_FMT: OK (Not Supported)
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
test CREATE_BUFS maximum buffers: OK
test VIDIOC_REMOVE_BUFS: OK
test VIDIOC_EXPBUF: OK (Not Supported)
test Requests: OK (Not Supported)
Total for device /dev/v4l-subdev1: 47, Succeeded: 47, Failed: 0, Warnings: 0
Cheers,
Prabhakar
Lad Prabhakar (12):
media: i2c: ov5645: Add V4L2_SUBDEV_FL_HAS_EVENTS and subscribe hooks
media: i2c: ov5645: Use local `dev` pointer for subdev device
assignment
media: i2c: ov5645: Enable runtime PM after
v4l2_async_register_subdev()
media: i2c: ov5645: Use dev_err_probe instead of dev_err
media: i2c: ov5645: Use v4l2_async_register_subdev_sensor()
media: i2c: ov5645: Drop `power_lock` mutex
media: i2c: ov5645: Use subdev active state
media: i2c: ov5645: Switch to {enable,disable}_streams
media: i2c: ov5645: Add internal image sink pad
media: i2c: ov5645: Report internal routes to userspace
media: i2c: ov5645: Report streams using frame descriptors
media: i2c: ov5645: Add virtual channel support
drivers/media/i2c/ov5645.c | 507 +++++++++++++++++++++++--------------
1 file changed, 316 insertions(+), 191 deletions(-)
