Re: [PATCH v3 07/29] media: iris: implement video firmware load/unload

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Aug 31, 2024 at 02:18:16PM GMT, Bryan O'Donoghue wrote:
> On 27/08/2024 11:05, Dikshita Agarwal via B4 Relay wrote:
> > From: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
> > 
> > Load/unload firmware in memory via mdt loader.
> > Firmware is loaded as part of core initialization
> > and unloaded as part of core de-initialization.
> > 
> > Signed-off-by: Dikshita Agarwal <quic_dikshita@xxxxxxxxxxx>
> > ---
> >   drivers/media/platform/qcom/iris/Kconfig           |   2 +
> >   drivers/media/platform/qcom/iris/Makefile          |   1 +
> >   drivers/media/platform/qcom/iris/iris_core.c       |   8 ++
> >   drivers/media/platform/qcom/iris/iris_firmware.c   | 146 +++++++++++++++++++++
> >   drivers/media/platform/qcom/iris/iris_firmware.h   |  14 ++
> >   .../platform/qcom/iris/iris_platform_common.h      |  12 ++
> >   .../platform/qcom/iris/iris_platform_sm8250.c      |  10 ++
> >   .../platform/qcom/iris/iris_platform_sm8550.c      |  10 ++
> >   8 files changed, 203 insertions(+)
> > 

[skipped]

> > @@ -38,4 +45,7 @@ struct iris_platform_data sm8250_data = {
> >   	.clk_tbl = sm8250_clk_table,
> >   	.clk_tbl_size = ARRAY_SIZE(sm8250_clk_table),
> >   	.dma_mask = GENMASK(31, 29) - 1,
> > +	.fwname = "qcom/vpu/vpu20_p4.mbn",
> 
> 
> RB5/sm8250 on this kernel
> 
> https://git.codelinaro.org/bryan.odonoghue/kernel/-/tree/linux-stable-24-08-29-iris-v3-rb5?ref_type=heads
> 
> CONFIG_QCOM_VENUS = m
> 
> Loads fine and I can run this simple smoke test
> 
> ffplay -loglevel debug -codec:video h264_v4l2m2m -i sample-5s.mp4
> gst-launch-1.0 -vvv -e filesrc location=sample-5s.mp4 ! qtdemux ! parsebin !
> v4l2h264dec ! autovideosink
> 
> 
> CONFIG_QCOM_IRIS = m
> 
> [    2.130077] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7
> counters available
> [   12.282381] qcom-iris aa00000.video-codec: Adding to iommu group 13
> [   12.463983] qcom-iris aa00000.video-codec: Direct firmware load for
> qcom/vpu/vpu20_p4.mbn failed with error -2
> [   12.474396] qcom-iris aa00000.video-codec: failed to request fw
> "qcom/vpu/vpu20_p4.mbn", error -2
> [   12.490919] qcom-iris aa00000.video-codec: firmware download failed
> [   12.516391] qcom-iris aa00000.video-codec: core init failed
> 
> In venus the firmware name is
> 
> .fwname = "qcom/vpu-1.0/venus.mbn"
> 
> What firmware reference are you testing on with your rb5/sm8250 stuff ?
> 
> Mine is linux-firmware / Debian sid.

linux-firmware Git supports both firmware names, but I agree, the driver
should be using the old firmware name. At least until linux-firmware
gets released and that name actually propagates to several distros.

> 
> root@linaro-gnome:~# dpkg -S /lib/firmware/qcom/vpu-1.0/venus.mbn
> firmware-qcom-soc: /lib/firmware/qcom/vpu-1.0/venus.mbn
> 
> https://packages.debian.org/sid/firmware-qcom-soc
> 
> Anyway I don't see much logic/justification for the firmware string change.
> 
> ---
> bod

-- 
With best wishes
Dmitry




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux