On Thu, 4 Nov 2010, Laurent Pinchart wrote: > Hi Bastian, Hi Bastian, all Have you or anyone ben successful getting mt9p031 to work with the omap3 ISP driver? If so - can I have the code? Or even if it never worked - could you post the latest version of your driver and platform bindings? Thanks Guennadi > > On Tuesday 02 November 2010 11:31:28 Bastian Hecht wrote: > > >> I am the first guy needing a 12 bit-bus? > > > > > > Yes you are :-) You will need to implement 12 bit support in the ISP > > > driver, or start by hacking the sensor driver to report a 10 bit format > > > (2 bits will be lost but you should still be able to capture an image). > > > > Isn't that an "officially" supported procedure to drop the least > > significant bits? > > You gave me the isp configuration > > .bus = { .parallel = { > > .data_lane_shift = 1, > > ... > > that instructs the isp to use 10 of the 12 bits. > > If you don't need the full 12 bits, sure, that should work. > > > >> Second thing is, the yavta app now gets stuck while dequeuing a buffer. > > >> > > >> strace ./yavta -f SGRBG10 -s 2592x1944 -n 4 --capture=4 --skip 3 -F > > >> /dev/video2 ... > > >> ioctl(3, VIDIOC_QBUF, 0xbec111cc) = 0 > > >> ioctl(3, VIDIOC_QBUF, 0xbec111cc) = 0 > > >> ioctl(3, VIDIOC_QBUF, 0xbec111cc) = 0 > > >> ioctl(3, VIDIOC_QBUF, 0xbec111cc) = 0 > > >> ioctl(3, VIDIOC_STREAMON, 0xbec11154) = 0 > > >> ioctl(3, VIDIOC_DQBUF > > >> > > >> strace gets stuck in mid of this line. > > > > Somehow the ISP_ENABLE_IRQ register was reset at some point that is > > unclear to me. When I put it on again manually yavta succeeds to read > > the frames. > > That's weird. Let me know if you can reproduce the problem. > > > Unfortunately the image consists of black pixels only. We found out that the > > 2.8V voltage regulator got broken in the course of development - the 1.8V > > logic still worked but the ADC did not... > > > > But the heck - I was never that close :) > > -- > Regards, > > Laurent Pinchart > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > --- Guennadi Liakhovetski, Ph.D. Freelance Open-Source Software Developer http://www.open-technology.de/ -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html