Re: [PATCH v4 3/7] media: mediatek: vcodec: flush decoder before stream off

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hey Yunfei,

On 07.08.2024 16:24, Yunfei Dong wrote:
Flush decoder will reset the driver to flush status. If lat or core
work queue in active before flush when stream off, will lead to get
dst buffer NULL or buff done with one non-existent source buffer.

Flush decoder when stream off no matter output or capture queue
calling stream off firstly.

Signed-off-by: Yunfei Dong <yunfei.dong@xxxxxxxxxxxx>
---
.../mediatek/vcodec/decoder/mtk_vcodec_dec.c  | 45 ++++++++++---------
1 file changed, 23 insertions(+), 22 deletions(-)

diff --git a/drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec.c b/drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec.c
index 7080ca3e18b0..fc4ee1fb7cd1 100644
--- a/drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec.c
+++ b/drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec.c
@@ -882,6 +882,29 @@ void vb2ops_vdec_stop_streaming(struct vb2_queue *q)
	mtk_v4l2_vdec_dbg(3, ctx, "[%d] (%d) state=(%x) ctx->decoded_frame_cnt=%d",
			  ctx->id, q->type, ctx->state, ctx->decoded_frame_cnt);

+	if (ctx->state >= MTK_STATE_HEADER && ctx->state != MTK_STATE_FLUSH) {
+		/*
+		 * The resolution hasn't been changed when STREAMOFF is called.
+		 * Update the picinfo here with previous resolution if VIDIOC_G_FMT
+		 * is called.
+		 */
+		ctx->picinfo = ctx->last_decoded_picinfo;
+
+		mtk_v4l2_vdec_dbg(2, ctx,
+				  "[%d]-> new(%d,%d), old(%d,%d), real(%d,%d)",
+				  ctx->id, ctx->last_decoded_picinfo.pic_w,
+				  ctx->last_decoded_picinfo.pic_h,
+				  ctx->picinfo.pic_w, ctx->picinfo.pic_h,
+				  ctx->last_decoded_picinfo.buf_w,
+				  ctx->last_decoded_picinfo.buf_h);
+
+		ret = ctx->dev->vdec_pdata->flush_decoder(ctx);
+		if (ret)
+			mtk_v4l2_vdec_err(ctx, "DecodeFinal failed, ret=%d", ret);
+
+		ctx->state = MTK_STATE_FLUSH;
+	}
+
	if (q->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
		while ((src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx))) {
			if (src_buf != &ctx->empty_flush_buf.vb) {
@@ -894,28 +917,6 @@ void vb2ops_vdec_stop_streaming(struct vb2_queue *q)
			}
		}

-		if (ctx->state >= MTK_STATE_HEADER) {
-			/*
-			 * The resolution hasn't been changed when STREAMOFF is called.
-			 * Update the picinfo here with previous resolution if VIDIOC_G_FMT
-			 * is called.
-			 */
-			ctx->picinfo = ctx->last_decoded_picinfo;
-
-			mtk_v4l2_vdec_dbg(2, ctx,
-					  "[%d]-> new(%d,%d), old(%d,%d), real(%d,%d)",
-					  ctx->id, ctx->last_decoded_picinfo.pic_w,
-					  ctx->last_decoded_picinfo.pic_h,
-					  ctx->picinfo.pic_w, ctx->picinfo.pic_h,
-					  ctx->last_decoded_picinfo.buf_w,
-					  ctx->last_decoded_picinfo.buf_h);
-
-			ret = ctx->dev->vdec_pdata->flush_decoder(ctx);
-			if (ret)
-				mtk_v4l2_vdec_err(ctx, "DecodeFinal failed, ret=%d", ret);
-		}
-
-		ctx->state = MTK_STATE_FLUSH;

you just changed this routine in patch 2/7, why was patch 2/7 needed if
you remove it right away in the next patch?

regards,
Sebastian Fricke

		return;
	}

--
2.46.0






[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux