On Sun, Aug 18, 2024 at 01:24:01PM -0500, Adam Ford wrote:
> On Tue, Aug 13, 2024 at 6:40 PM Laurent Pinchart
> <laurent.pinchart@xxxxxxxxxxxxxxxx> wrote:
> >
> > From: Paul Elder <paul.elder@xxxxxxxxxxxxxxxx>
> >
> > The ISP supports both CSI and parallel interfaces, where port 0
> > corresponds to the former and port 1 corresponds to the latter. Since
> > the i.MX8MP's ISPs are connected by the parallel interface to the CSI
> > receiver, set them both to port 1.
> >
> > Signed-off-by: Paul Elder <paul.elder@xxxxxxxxxxxxxxxx>
> > Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> > Tested-by: Adam Ford <aford173@xxxxxxxxx> # imx8mp-beacon
> > ---
> > Changes since v2:
> >
> > - Assign clock parent and frequency in blk-ctrl
> >
> > Changes since v1:
> >
> > - Fix clock ordering
> > - Add #address-cells and #size-cells to ports nodes
> > ---
> > arch/arm64/boot/dts/freescale/imx8mp.dtsi | 51 ++++++++++++++++++++++-
> > 1 file changed, 49 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > index d9b5c40f6460..09f1e27ee220 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > @@ -1673,6 +1673,50 @@ isi_in_1: endpoint {
> > };
> > };
> >
> > + isp_0: isp@32e10000 {
> > + compatible = "fsl,imx8mp-isp";
> > + reg = <0x32e10000 0x10000>;
> > + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>,
> > + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
> > + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
> > + clock-names = "isp", "aclk", "hclk";
> > + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>;
> > + fsl,blk-ctrl = <&media_blk_ctrl 0>;
> > + status = "disabled";
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@1 {
> > + reg = <1>;
> > + };
> > + };
> > + };
> > +
> > + isp_1: isp@32e20000 {
> > + compatible = "fsl,imx8mp-isp";
> > + reg = <0x32e20000 0x10000>;
> > + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>,
> > + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
> > + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
> > + clock-names = "isp", "aclk", "hclk";
> > + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>;
> > + fsl,blk-ctrl = <&media_blk_ctrl 1>;
> > + status = "disabled";
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@1 {
> > + reg = <1>;
> > + };
> > + };
> > + };
> > +
> > dewarp: dwe@32e30000 {
> > compatible = "nxp,imx8mp-dw100";
> > reg = <0x32e30000 0x10000>;
> > @@ -1873,13 +1917,16 @@ media_blk_ctrl: blk-ctrl@32ec0000 {
> > <&clk IMX8MP_CLK_MEDIA_APB>,
> > <&clk IMX8MP_CLK_MEDIA_DISP1_PIX>,
> > <&clk IMX8MP_CLK_MEDIA_DISP2_PIX>,
> > + <&clk IMX8MP_CLK_MEDIA_ISP>,
> > <&clk IMX8MP_VIDEO_PLL1>;
> > assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>,
> > <&clk IMX8MP_SYS_PLL1_800M>,
> > <&clk IMX8MP_VIDEO_PLL1_OUT>,
> > - <&clk IMX8MP_VIDEO_PLL1_OUT>;
> > + <&clk IMX8MP_VIDEO_PLL1_OUT>,
> > + <&clk IMX8MP_SYS_PLL2_500M>;
> > assigned-clock-rates = <500000000>, <200000000>,
> > - <0>, <0>, <1039500000>;
> > + <0>, <0>, <0>, <500000000>,
>
> Is the insertion of the extra <0> here correct? You inserted one
> clock above for IMX8MP_CLK_MEDIA_ISP, but it appears you inserted two
> here.
> I think this might break the IMX8MP_VIDEO_PLL1 rate and not set the
> IMX8MP_CLK_MEDIA_ISP as expected.
>
> Am I missing something?
You're missing v4 :-)
> > + <1039500000>;
> > #power-domain-cells = <1>;
> >
> > lvds_bridge: bridge@5c {
> >
> > base-commit: 7c626ce4bae1ac14f60076d00eafe71af30450ba
--
Regards,
Laurent Pinchart
