Re: [PATCH v4] arm64: dts: imx8mp: Add DT nodes for the two ISPs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Laurent,

thanks for the updated patch.

Am Mittwoch, 14. August 2024, 18:14:51 CEST schrieb Laurent Pinchart:
> From: Paul Elder <paul.elder@xxxxxxxxxxxxxxxx>
> 
> The ISP supports both CSI and parallel interfaces, where port 0
> corresponds to the former and port 1 corresponds to the latter. Since
> the i.MX8MP's ISPs are connected by the parallel interface to the CSI
> receiver, set them both to port 1.
> 
> Signed-off-by: Paul Elder <paul.elder@xxxxxxxxxxxxxxxx>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> ---
> Changes since v3:
> 
> - Add comment regarding the IMX8MP_CLK_MEDIA_ISP clock rate
> - Fix assigned-clock-rates
> - Dropping Tested-by as the clock configuration has changed
> 
> Changes since v2:
> 
> - Assign clock parent and frequency in blk-ctrl
> 
> Changes since v1:
> 
> - Fix clock ordering
> - Add #address-cells and #size-cells to ports nodes
> ---
>  arch/arm64/boot/dts/freescale/imx8mp.dtsi | 57 ++++++++++++++++++++++-
>  1 file changed, 55 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> index d9b5c40f6460..f3531cfb0d79 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> @@ -1673,6 +1673,50 @@ isi_in_1: endpoint {
>  				};
>  			};
>  
> +			isp_0: isp@32e10000 {
> +				compatible = "fsl,imx8mp-isp";
> +				reg = <0x32e10000 0x10000>;
> +				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>,
> +					 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
> +					 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
> +				clock-names = "isp", "aclk", "hclk";
> +				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>;
> +				fsl,blk-ctrl = <&media_blk_ctrl 0>;
> +				status = "disabled";
> +
> +				ports {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					port@1 {
> +						reg = <1>;
> +					};
> +				};
> +			};
> +
> +			isp_1: isp@32e20000 {
> +				compatible = "fsl,imx8mp-isp";
> +				reg = <0x32e20000 0x10000>;
> +				interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
> +				clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>,
> +					 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
> +					 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
> +				clock-names = "isp", "aclk", "hclk";
> +				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>;
> +				fsl,blk-ctrl = <&media_blk_ctrl 1>;
> +				status = "disabled";
> +
> +				ports {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					port@1 {
> +						reg = <1>;
> +					};
> +				};
> +			};
> +
>  			dewarp: dwe@32e30000 {
>  				compatible = "nxp,imx8mp-dw100";
>  				reg = <0x32e30000 0x10000>;
> @@ -1869,17 +1913,26 @@ media_blk_ctrl: blk-ctrl@32ec0000 {
>  				clock-names = "apb", "axi", "cam1", "cam2",
>  					      "disp1", "disp2", "isp", "phy";
>  
> +				/*
> +				 * The ISP maximum frequency is 400MHz in normal mode
> +				 * and 500MHz in overdrive mode. The 400MHz operating
> +				 * point hasn't been successfully tested yet, so set
> +				 * IMX8MP_CLK_MEDIA_ISP to 500MHz for the time being.
> +				 */
>  				assigned-clocks = <&clk IMX8MP_CLK_MEDIA_AXI>,
>  						  <&clk IMX8MP_CLK_MEDIA_APB>,
>  						  <&clk IMX8MP_CLK_MEDIA_DISP1_PIX>,
>  						  <&clk IMX8MP_CLK_MEDIA_DISP2_PIX>,
> +						  <&clk IMX8MP_CLK_MEDIA_ISP>,
>  						  <&clk IMX8MP_VIDEO_PLL1>;
>  				assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>,
>  							 <&clk IMX8MP_SYS_PLL1_800M>,
>  							 <&clk IMX8MP_VIDEO_PLL1_OUT>,
> -							 <&clk IMX8MP_VIDEO_PLL1_OUT>;
> +							 <&clk IMX8MP_VIDEO_PLL1_OUT>,
> +							 <&clk IMX8MP_SYS_PLL2_500M>;
>  				assigned-clock-rates = <500000000>, <200000000>,
> -						       <0>, <0>, <1039500000>;
> +						       <0>, <0>, <500000000>,
> +						       <1039500000>;

Unfortunately for some reason this reparenting doesn't work (on my platform).
'media_isp' is still below IMX8MP_CLK_24M.
$ grep -B1 media_isp /sys/kernel/debug/clk/clk_summary
    mipi_dsi_esc_rx                  0       0        0        24000000    0          0     50000      N      deviceless                      no_connection_id         
    media_isp                        0       0        0        24000000    0          0     50000      N      deviceless                      no_connection_id         
       media_isp_root_clk            0       0        0        24000000    0          0     50000      N         32e10000.isp                    isp

I have to add this diff for isp_0 (and isp_1 if you use it):
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -1683,6 +1683,9 @@ isp_0: isp@32e10000 {
                                clock-names = "isp", "aclk", "hclk";
                                power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>;
                                fsl,blk-ctrl = <&media_blk_ctrl 0>;
+                               assigned-clocks = <&clk IMX8MP_CLK_MEDIA_ISP>;
+                               assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>;
+                               assigned-clock-rates = <500000000>;
                                status = "disabled";
 
                                ports {

Now clock is setup properly:
$ grep -B1 media_isp /sys/kernel/debug/clk/clk_summary
                sys_pll2_500m        3       3        0        500000000   0          0     50000      Y                  deviceless                      no_connection_id         
                   media_isp         0       0        0        500000000   0          0     50000      N                     deviceless                      no_connection_id         
                      media_isp_root_clk 0       0        0        500000000   0          0     50000      N                        32e10000.isp                    isp


Best regards,
Alexander

>  				#power-domain-cells = <1>;
>  
>  				lvds_bridge: bridge@5c {
> 
> base-commit: 7c626ce4bae1ac14f60076d00eafe71af30450ba
> prerequisite-patch-id: ad2bbccf3b0f27415fb14851cec52c431ccb354f
> 


-- 
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/







[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux