Hi Depeng,
please find a few review comments, all asked changes are non-functional.
On 8/12/24 17:41, Depeng Shao wrote:
Add support for VFE found on SM8550 (Titan 780). This implementation is
based on the titan 480 implementation. It supports the normal and lite
VFE.
Co-developed-by: Yongsheng Li <quic_yon@xxxxxxxxxxx>
Signed-off-by: Yongsheng Li <quic_yon@xxxxxxxxxxx>
Signed-off-by: Depeng Shao <quic_depengs@xxxxxxxxxxx>
---
drivers/media/platform/qcom/camss/Makefile | 1 +
.../media/platform/qcom/camss/camss-vfe-780.c | 148 ++++++++++++++++++
drivers/media/platform/qcom/camss/camss-vfe.c | 33 ++--
drivers/media/platform/qcom/camss/camss-vfe.h | 1 +
drivers/media/platform/qcom/camss/camss.c | 132 ++++++++++++++++
drivers/media/platform/qcom/camss/camss.h | 2 +
6 files changed, 304 insertions(+), 13 deletions(-)
create mode 100644 drivers/media/platform/qcom/camss/camss-vfe-780.c
diff --git a/drivers/media/platform/qcom/camss/Makefile b/drivers/media/platform/qcom/camss/Makefile
index c336e4c1a399..a83b7a8dcef7 100644
--- a/drivers/media/platform/qcom/camss/Makefile
+++ b/drivers/media/platform/qcom/camss/Makefile
@@ -17,6 +17,7 @@ qcom-camss-objs += \
camss-vfe-4-8.o \
camss-vfe-17x.o \
camss-vfe-480.o \
+ camss-vfe-780.o \
camss-vfe-gen1.o \
camss-vfe.o \
camss-video.o \
diff --git a/drivers/media/platform/qcom/camss/camss-vfe-780.c b/drivers/media/platform/qcom/camss/camss-vfe-780.c
new file mode 100644
index 000000000000..e1c4d25cdc40
--- /dev/null
+++ b/drivers/media/platform/qcom/camss/camss-vfe-780.c
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * camss-vfe-780.c
I understand that a file name copied from a previous file and updated,
let's just remove it, it serves no purpose, but adds this unnecessary
work on every next copy.
+ *
+ * Qualcomm MSM Camera Subsystem - VFE (Video Front End) Module v780 (SM8550)
+ *
+ * Copyright (c) 2024 Qualcomm Technologies, Inc.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+
+#include "camss.h"
+#include "camss-vfe.h"
+
+#define BUS_REG_BASE (vfe_is_lite(vfe) ? 0x200 : 0xC00)
+
+#define VFE_BUS_WM_CGC_OVERRIDE (BUS_REG_BASE + 0x08)
+#define WM_CGC_OVERRIDE_ALL (0x7FFFFFF)
+
+#define VFE_BUS_WM_TEST_BUS_CTRL (BUS_REG_BASE + 0xDC)
+
+#define VFE_BUS_WM_CFG(n) (BUS_REG_BASE + 0x200 + (n) * 0x100)
+#define WM_CFG_EN BIT(0)
+#define WM_VIR_FRM_EN BIT(1)
+#define WM_CFG_MODE BIT(16)
+#define VFE_BUS_WM_IMAGE_ADDR(n) (BUS_REG_BASE + 0x204 + (n) * 0x100)
+#define VFE_BUS_WM_FRAME_INCR(n) (BUS_REG_BASE + 0x208 + (n) * 0x100)
+#define VFE_BUS_WM_IMAGE_CFG_0(n) (BUS_REG_BASE + 0x20c + (n) * 0x100)
+#define WM_IMAGE_CFG_0_DEFAULT_WIDTH (0xFFFF)
+#define VFE_BUS_WM_IMAGE_CFG_1(n) (BUS_REG_BASE + 0x210 + (n) * 0x100)
+#define VFE_BUS_WM_IMAGE_CFG_2(n) (BUS_REG_BASE + 0x214 + (n) * 0x100)
+#define WM_IMAGE_CFG_2_DEFAULT_STRIDE (0xFFFF)
+#define VFE_BUS_WM_PACKER_CFG(n) (BUS_REG_BASE + 0x218 + (n) * 0x100)
+#define VFE_BUS_WM_HEADER_ADDR(n) (BUS_REG_BASE + 0x220 + (n) * 0x100)
+#define VFE_BUS_WM_HEADER_INCR(n) (BUS_REG_BASE + 0x224 + (n) * 0x100)
+#define VFE_BUS_WM_HEADER_CFG(n) (BUS_REG_BASE + 0x228 + (n) * 0x100)
Three VFE_BUS_WM_HEADER_* macra above are not used, please remove.
+
+#define VFE_BUS_WM_IRQ_SUBSAMPLE_PERIOD(n) (BUS_REG_BASE + 0x230 + (n) * 0x100)
+#define VFE_BUS_WM_IRQ_SUBSAMPLE_PATTERN(n) (BUS_REG_BASE + 0x234 + (n) * 0x100)
+#define VFE_BUS_WM_FRAMEDROP_PERIOD(n) (BUS_REG_BASE + 0x238 + (n) * 0x100)
+#define VFE_BUS_WM_FRAMEDROP_PATTERN(n) (BUS_REG_BASE + 0x23c + (n) * 0x100)
+
+#define VFE_BUS_WM_MMU_PREFETCH_CFG(n) (BUS_REG_BASE + 0x260 + (n) * 0x100)
+#define VFE_BUS_WM_MMU_PREFETCH_MAX_OFFSET(n) (BUS_REG_BASE + 0x264 + (n) * 0x100)
+#define VFE_BUS_WM_SYSTEM_CACHE_CFG(n) (BUS_REG_BASE + 0x268 + (n) * 0x100)
Good to know that there is such a register, but it's not used,
please remove the macro.
+
+/* for titan 780, each bus client is hardcoded to a specific path */
+#define RDI_WM(n) ((vfe_is_lite(vfe) ? 0x0 : 0x17) + (n))
+
+static void vfe_wm_start(struct vfe_device *vfe, u8 wm, struct vfe_line *line)
+{
+ struct v4l2_pix_format_mplane *pix =
+ &line->video_out.active_fmt.fmt.pix_mp;
+
+ wm = RDI_WM(wm); /* map to actual WM used (from wm=RDI index) */
Please move the comment on its own line.
+
+ /* no clock gating at bus input */
+ writel(WM_CGC_OVERRIDE_ALL, vfe->base + VFE_BUS_WM_CGC_OVERRIDE);
+
+ writel(0x0, vfe->base + VFE_BUS_WM_TEST_BUS_CTRL);
+
+ writel(ALIGN(pix->plane_fmt[0].bytesperline, 16) * pix->height >> 8,
+ vfe->base + VFE_BUS_WM_FRAME_INCR(wm));
+ writel((WM_IMAGE_CFG_0_DEFAULT_WIDTH & 0xFFFF),
+ vfe->base + VFE_BUS_WM_IMAGE_CFG_0(wm));
+ writel(WM_IMAGE_CFG_2_DEFAULT_STRIDE,
+ vfe->base + VFE_BUS_WM_IMAGE_CFG_2(wm));
+ writel(0, vfe->base + VFE_BUS_WM_PACKER_CFG(wm));
+
+ /* no dropped frames, one irq per frame */
+ writel(0, vfe->base + VFE_BUS_WM_FRAMEDROP_PERIOD(wm));
+ writel(1, vfe->base + VFE_BUS_WM_FRAMEDROP_PATTERN(wm));
+ writel(0, vfe->base + VFE_BUS_WM_IRQ_SUBSAMPLE_PERIOD(wm));
+ writel(1, vfe->base + VFE_BUS_WM_IRQ_SUBSAMPLE_PATTERN(wm));
+
+ writel(1, vfe->base + VFE_BUS_WM_MMU_PREFETCH_CFG(wm));
+ writel(0xFFFFFFFF, vfe->base + VFE_BUS_WM_MMU_PREFETCH_MAX_OFFSET(wm));
+
+ writel(WM_CFG_EN | WM_CFG_MODE, vfe->base + VFE_BUS_WM_CFG(wm));
+}
+
+static void vfe_wm_stop(struct vfe_device *vfe, u8 wm)
+{
+ wm = RDI_WM(wm); /* map to actual WM used (from wm=RDI index) */
Please move the comment on its own line or remove it as obvious one.
+ writel(0, vfe->base + VFE_BUS_WM_CFG(wm));
+}
+
+static void vfe_wm_update(struct vfe_device *vfe, u8 wm, u32 addr,
+ struct vfe_line *line)
+{
+ wm = RDI_WM(wm); /* map to actual WM used (from wm=RDI index) */
Please move the comment on its own line or remove it as obvious one.
+ writel((addr >> 8) & 0xFFFFFFFF, vfe->base + VFE_BUS_WM_IMAGE_ADDR(wm));
+
+ dev_dbg(vfe->camss->dev, "%s wm:%d, image buf addr:0x%x\n",
+ __func__, wm, addr);
There will be no confusion in runtime about a source of the debug
message, please remove that __func__ information.
+}
+
+static void vfe_reg_update(struct vfe_device *vfe, enum vfe_line_id line_id)
+{
+ int port_id = line_id;
+
+ /* RUP(register update) registers has beem moved to CSID in Titan 780.
Huh, it's unusual to see a network subsystem style comment formatting here.
There is a typo, s/beem/been/
+ * Notify the event of trigger RUP.
+ */
I suppose it would be good enough to remove the comment completely as
an obvious one.
+ camss_reg_update(vfe->camss, vfe->id, port_id, false);
+}
+
+static inline void vfe_reg_update_clear(struct vfe_device *vfe,
+ enum vfe_line_id line_id)
+{
+ int port_id = line_id;
+
+ /* RUP(register update) registers has beem moved to CSID in Titan 780.
+ * Notify the event of trigger RUP clear.
+ */
Same as above.
+ camss_reg_update(vfe->camss, vfe->id, port_id, true);
+}
+
+static const struct camss_video_ops vfe_video_ops_780 = {
+ .queue_buffer = vfe_queue_buffer_v2,
+ .flush_buffers = vfe_flush_buffers,
+};
+
+static void vfe_subdev_init(struct device *dev, struct vfe_device *vfe)
+{
+ vfe->video_ops = vfe_video_ops_780;
+}
+
+const struct vfe_hw_ops vfe_ops_780 = {
+ .enable_irq = NULL,
+ .global_reset = NULL,
+ .hw_version = vfe_hw_version,
+ .isr = NULL,
+ .pm_domain_off = vfe_pm_domain_off,
+ .pm_domain_on = vfe_pm_domain_on,
+ .subdev_init = vfe_subdev_init,
+ .vfe_disable = vfe_disable,
+ .vfe_enable = vfe_enable_v2,
+ .vfe_halt = NULL,
+ .vfe_wm_start = vfe_wm_start,
+ .vfe_wm_stop = vfe_wm_stop,
+ .vfe_buf_done = vfe_buf_done,
+ .vfe_wm_update = vfe_wm_update,
+ .reg_update = vfe_reg_update,
+ .reg_update_clear = vfe_reg_update_clear,
+};
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
index 71bd55e854bb..507fc7785ac8 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe.c
@@ -343,6 +343,7 @@ static u32 vfe_src_pad_code(struct vfe_line *line, u32 sink_code,
case CAMSS_845:
case CAMSS_8250:
case CAMSS_8280XP:
+ case CAMSS_8550:
switch (sink_code) {
case MEDIA_BUS_FMT_YUYV8_1X16:
{
@@ -674,15 +675,17 @@ int vfe_reset(struct vfe_device *vfe)
{
unsigned long time;
- reinit_completion(&vfe->reset_complete);
+ if (vfe->res->hw_ops->global_reset) {
+ reinit_completion(&vfe->reset_complete);
- vfe->res->hw_ops->global_reset(vfe);
+ vfe->res->hw_ops->global_reset(vfe);
- time = wait_for_completion_timeout(&vfe->reset_complete,
- msecs_to_jiffies(VFE_RESET_TIMEOUT_MS));
- if (!time) {
- dev_err(vfe->camss->dev, "VFE reset timeout\n");
- return -EIO;
+ time = wait_for_completion_timeout(&vfe->reset_complete,
+ msecs_to_jiffies(VFE_RESET_TIMEOUT_MS));
+ if (!time) {
+ dev_err(vfe->camss->dev, "VFE reset timeout\n");
+ return -EIO;
+ }
This goes to some other preceding change, since it's unrelated to Titan 780
support, but the latter depends on it.
}
return 0;
@@ -1120,7 +1123,8 @@ void vfe_put(struct vfe_device *vfe)
} else if (vfe->power_count == 1) {
if (vfe->was_streaming) {
vfe->was_streaming = 0;
- vfe->res->hw_ops->vfe_halt(vfe);
+ if (vfe->res->hw_ops->vfe_halt)
+ vfe->res->hw_ops->vfe_halt(vfe);
This goes to some other change, since it's unrelated to Titan 780 support.
}
camss_disable_clocks(vfe->nclocks, vfe->clock);
pm_runtime_put_sync(vfe->camss->dev);
@@ -1807,11 +1811,13 @@ int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe,
vfe->irq = ret;
snprintf(vfe->irq_name, sizeof(vfe->irq_name), "%s_%s%d",
dev_name(dev), MSM_VFE_NAME, id);
- ret = devm_request_irq(dev, vfe->irq, vfe->res->hw_ops->isr,
- IRQF_TRIGGER_RISING, vfe->irq_name, vfe);
- if (ret < 0) {
- dev_err(dev, "request_irq failed: %d\n", ret);
- return ret;
+ if (vfe->res->hw_ops->isr) {
+ ret = devm_request_irq(dev, vfe->irq, vfe->res->hw_ops->isr,
+ IRQF_TRIGGER_RISING, vfe->irq_name, vfe);
+ if (ret < 0) {
+ dev_err(dev, "request_irq failed: %d\n", ret);
+ return ret;
+ }
This change shall be done in a seperate preceding commit, since it's
unrelated to Titan 780 support.
}
/* Clocks */
@@ -1963,6 +1969,7 @@ static int vfe_bpl_align(struct vfe_device *vfe)
case CAMSS_845:
case CAMSS_8250:
case CAMSS_8280XP:
+ case CAMSS_8550:
ret = 16;
break;
default:
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.h b/drivers/media/platform/qcom/camss/camss-vfe.h
index fcbf4f609129..9dec5bc0d1b1 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.h
+++ b/drivers/media/platform/qcom/camss/camss-vfe.h
@@ -243,6 +243,7 @@ extern const struct vfe_hw_ops vfe_ops_4_7;
extern const struct vfe_hw_ops vfe_ops_4_8;
extern const struct vfe_hw_ops vfe_ops_170;
extern const struct vfe_hw_ops vfe_ops_480;
+extern const struct vfe_hw_ops vfe_ops_780;
int vfe_get(struct vfe_device *vfe);
void vfe_put(struct vfe_device *vfe);
diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
index 7ee102948dc4..92a0fa02e415 100644
--- a/drivers/media/platform/qcom/camss/camss.c
+++ b/drivers/media/platform/qcom/camss/camss.c
@@ -1666,6 +1666,125 @@ static const struct camss_subdev_resources csid_res_8550[] = {
}
};
+static const struct camss_subdev_resources vfe_res_8550[] = {
+ /* VFE0 */
+ {
+ .regulators = {},
+ .clock = { "gcc_axi_hf", "cpas_ahb", "cpas_fast_ahb_clk", "vfe0_fast_ahb",
+ "vfe0", "cpas_vfe0", "camnoc_axi" },
+ .clock_rate = { { 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 80000000 },
+ { 300000000, 300000000, 400000000, 400000000, 400000000 },
+ { 300000000, 300000000, 400000000, 400000000, 400000000 },
+ { 466000000, 594000000, 675000000, 785000000, 785000000 },
+ { 300000000, 300000000, 400000000, 400000000, 400000000 },
+ { 300000000, 300000000, 400000000, 400000000, 400000000 } },
+ .reg = { "vfe0" },
+ .interrupt = { "vfe0" },
+ .vfe = {
+ .line_num = 3,
+ .is_lite = false,
+ .has_pd = true,
+ .pd_name = "ife0",
+ .hw_ops = &vfe_ops_780,
+ .formats_rdi = &vfe_formats_rdi_845,
+ .formats_pix = &vfe_formats_pix_845
+ }
+ },
+ /* VFE1 */
+ {
+ .regulators = {},
+ .clock = { "gcc_axi_hf", "cpas_ahb", "cpas_fast_ahb_clk", "vfe1_fast_ahb",
+ "vfe1", "cpas_vfe1", "camnoc_axi" },
+ .clock_rate = { { 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 80000000 },
+ { 300000000, 300000000, 400000000, 400000000, 400000000 },
+ { 300000000, 300000000, 400000000, 400000000, 400000000 },
+ { 466000000, 594000000, 675000000, 785000000, 785000000 },
+ { 300000000, 300000000, 400000000, 400000000, 400000000 },
+ { 300000000, 300000000, 400000000, 400000000, 400000000 } },
+ .reg = { "vfe1" },
+ .interrupt = { "vfe1" },
+ .vfe = {
+ .line_num = 3,
+ .is_lite = false,
+ .has_pd = true,
+ .pd_name = "ife1",
+ .hw_ops = &vfe_ops_780,
+ .formats_rdi = &vfe_formats_rdi_845,
+ .formats_pix = &vfe_formats_pix_845
+ }
+ },
+ /* VFE2 */
+ {
+ .regulators = {},
+ .clock = { "gcc_axi_hf", "cpas_ahb", "cpas_fast_ahb_clk", "vfe2_fast_ahb",
+ "vfe2", "cpas_vfe2", "camnoc_axi" },
+ .clock_rate = { { 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 80000000 },
+ { 300000000, 300000000, 400000000, 400000000, 400000000 },
+ { 300000000, 300000000, 400000000, 400000000, 400000000 },
+ { 466000000, 594000000, 675000000, 785000000, 785000000 },
+ { 300000000, 300000000, 400000000, 400000000, 400000000 },
+ { 300000000, 300000000, 400000000, 400000000, 400000000 } },
+ .reg = { "vfe2" },
+ .interrupt = { "vfe2" },
+ .vfe = {
+ .line_num = 3,
+ .is_lite = false,
+ .has_pd = true,
+ .pd_name = "ife2",
+ .hw_ops = &vfe_ops_780,
+ .formats_rdi = &vfe_formats_rdi_845,
+ .formats_pix = &vfe_formats_pix_845
+ }
+ },
+ /* VFE3 lite */
+ {
+ .regulators = {},
+ .clock = { "gcc_axi_hf", "cpas_ahb", "cpas_fast_ahb_clk", "vfe_lite_ahb",
+ "vfe_lite", "cpas_ife_lite", "camnoc_axi" },
+ .clock_rate = { { 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 80000000 },
+ { 300000000, 300000000, 400000000, 400000000, 400000000 },
+ { 300000000, 300000000, 400000000, 400000000, 400000000 },
+ { 400000000, 480000000, 480000000, 480000000, 480000000 },
+ { 300000000, 300000000, 400000000, 400000000, 400000000 },
+ { 300000000, 300000000, 400000000, 400000000, 400000000 } },
+ .reg = { "vfe_lite0" },
+ .interrupt = { "vfe_lite0" },
+ .vfe = {
+ .line_num = 4,
+ .is_lite = true,
+ .hw_ops = &vfe_ops_780,
+ .formats_rdi = &vfe_formats_rdi_845,
+ .formats_pix = &vfe_formats_pix_845
+ }
+ },
+ /* VFE4 lite */
+ {
+ .regulators = {},
+ .clock = { "gcc_axi_hf", "cpas_ahb", "cpas_fast_ahb_clk", "vfe_lite_ahb",
+ "vfe_lite", "cpas_ife_lite", "camnoc_axi" },
+ .clock_rate = { { 0, 0, 0, 0, 0 },
+ { 0, 0, 0, 0, 80000000 },
+ { 300000000, 300000000, 400000000, 400000000, 400000000 },
+ { 300000000, 300000000, 400000000, 400000000, 400000000 },
+ { 400000000, 480000000, 480000000, 480000000, 480000000 },
+ { 300000000, 300000000, 400000000, 400000000, 400000000 },
+ { 300000000, 300000000, 400000000, 400000000, 400000000 } },
+ .reg = { "vfe_lite1" },
+ .interrupt = { "vfe_lite1" },
+ .vfe = {
+ .line_num = 4,
+ .is_lite = true,
+ .hw_ops = &vfe_ops_780,
+ .formats_rdi = &vfe_formats_rdi_845,
+ .formats_pix = &vfe_formats_pix_845
+ }
+ },
+};
+
static const struct resources_icc icc_res_sm8550[] = {
{
.name = "ahb",
@@ -1846,6 +1965,17 @@ void camss_pm_domain_off(struct camss *camss, int id)
}
}
+void camss_reg_update(struct camss *camss, int hw_id, int port_id, bool is_clear)
Please let it be just a declarative 'clear' instead of questioning 'is_clear'.
+{
+ struct csid_device *csid;
+
+ if (hw_id < camss->res->csid_num) {
+ csid = &(camss->csid[hw_id]);
+
+ csid->res->hw_ops->reg_update(csid, port_id, is_clear);
+ }
+}
+
Please add the new exported function camss_reg_update() in a separate
preceding commit.
void camss_buf_done(struct camss *camss, int hw_id, int port_id)
{
struct vfe_device *vfe;
@@ -2668,10 +2798,12 @@ static const struct camss_resources sm8550_resources = {
.pd_name = "top",
.csiphy_res = csiphy_res_8550,
.csid_res = csid_res_8550,
+ .vfe_res = vfe_res_8550,
.icc_res = icc_res_sm8550,
.icc_path_num = ARRAY_SIZE(icc_res_sm8550),
.csiphy_num = ARRAY_SIZE(csiphy_res_8550),
.csid_num = ARRAY_SIZE(csid_res_8550),
+ .vfe_num = ARRAY_SIZE(vfe_res_8550),
.link_entities = camss_link_entities
};
diff --git a/drivers/media/platform/qcom/camss/camss.h b/drivers/media/platform/qcom/camss/camss.h
index d6b6558a82b9..697846e70e78 100644
--- a/drivers/media/platform/qcom/camss/camss.h
+++ b/drivers/media/platform/qcom/camss/camss.h
@@ -157,5 +157,7 @@ int camss_vfe_get(struct camss *camss, int id);
void camss_vfe_put(struct camss *camss, int id);
void camss_delete(struct camss *camss);
void camss_buf_done(struct camss *camss, int hw_id, int port_id);
+void camss_reg_update(struct camss *camss, int hw_id,
+ int port_id, bool is_clear);
#endif /* QC_MSM_CAMSS_H */
Thank you for the efforts to get support of Titan 780 in the upstream.
--
Best wishes,
Vladimir
