On 08/07/2024 02:59, Jammy Huang wrote:
> ASPEED BMC IC has 2 different display engines. Please find AST2600's
> datasheet to get detailed information.
>
> 1. VGA on PCIe
> 2. SoC Display (GFX)
>
> By default, video engine (VE) will capture video from VGA. This patch
> adds an option to capture video from GFX with standard ioctl,
> vidioc_s_input.
>
> An enum, aspeed_video_input, is added for this purpose.
> enum aspeed_video_input {
> VIDEO_INPUT_VGA = 0,
> VIDEO_INPUT_GFX,
> VIDEO_INPUT_MAX
> };
>
> To test this feature, you will need to enable GFX first. Please refer to
> ASPEED's SDK_User_Guide, 6.3.x Soc Display driver, for more information.
> In your application, you will need to use v4l2 ioctl, VIDIOC_S_INPUT, as
> below to select before start streaming.
>
> int rc;
> struct v4l2_input input;
>
> input.index = VIDEO_INPUT_GFX;
> rc = ioctl(fd, VIDIOC_S_INPUT, &input);
> if (rc < 0)
> {
> ...
> }
>
> Link: https://github.com/AspeedTech-BMC/openbmc/releases
> Signed-off-by: Jammy Huang <jammy_huang@xxxxxxxxxxxxxx>
> ---
> drivers/media/platform/aspeed/aspeed-video.c | 189 ++++++++++++++++---
> include/uapi/linux/aspeed-video.h | 7 +
> 2 files changed, 170 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/media/platform/aspeed/aspeed-video.c b/drivers/media/platform/aspeed/aspeed-video.c
> index fc6050e3be0d..79dbec113f3f 100644
> --- a/drivers/media/platform/aspeed/aspeed-video.c
> +++ b/drivers/media/platform/aspeed/aspeed-video.c
> @@ -25,6 +25,8 @@
> #include <linux/workqueue.h>
> #include <linux/debugfs.h>
> #include <linux/ktime.h>
> +#include <linux/regmap.h>
> +#include <linux/mfd/syscon.h>
> #include <media/v4l2-ctrls.h>
> #include <media/v4l2-dev.h>
> #include <media/v4l2-device.h>
> @@ -203,6 +205,25 @@
> #define VE_MEM_RESTRICT_START 0x310
> #define VE_MEM_RESTRICT_END 0x314
>
> +/* SCU's registers */
> +#define SCU_MISC_CTRL 0xC0
> +#define SCU_DPLL_SOURCE BIT(20)
> +
> +/* GFX's registers */
> +#define GFX_CTRL 0x60
> +#define GFX_CTRL_ENABLE BIT(0)
> +#define GFX_CTRL_FMT GENMASK(9, 7)
> +
> +#define GFX_H_DISPLAY 0x70
> +#define GFX_H_DISPLAY_DE GENMASK(28, 16)
> +#define GFX_H_DISPLAY_TOTAL GENMASK(12, 0)
> +
> +#define GFX_V_DISPLAY 0x78
> +#define GFX_V_DISPLAY_DE GENMASK(27, 16)
> +#define GFX_V_DISPLAY_TOTAL GENMASK(11, 0)
> +
> +#define GFX_DISPLAY_ADDR 0x80
> +
> /*
> * VIDEO_MODE_DETECT_DONE: a flag raised if signal lock
> * VIDEO_RES_CHANGE: a flag raised if res_change work on-going
> @@ -262,6 +283,7 @@ struct aspeed_video_perf {
> /*
> * struct aspeed_video - driver data
> *
> + * version: holds the version of aspeed SoC
> * res_work: holds the delayed_work for res-detection if unlock
> * buffers: holds the list of buffer queued from user
> * flags: holds the state of video
> @@ -273,6 +295,7 @@ struct aspeed_video_perf {
> * yuv420: a flag raised if JPEG subsampling is 420
> * format: holds the video format
> * hq_mode: a flag raised if HQ is enabled. Only for VIDEO_FMT_ASPEED
> + * input: holds the video input
> * frame_rate: holds the frame_rate
> * jpeg_quality: holds jpeq's quality (0~11)
> * jpeg_hq_quality: holds hq's quality (1~12) only if hq_mode enabled
> @@ -298,6 +321,9 @@ struct aspeed_video {
> struct video_device vdev;
> struct mutex video_lock; /* v4l2 and videobuf2 lock */
>
> + struct regmap *scu;
> + struct regmap *gfx;
> + u32 version;
> u32 jpeg_mode;
> u32 comp_size_read;
>
> @@ -316,6 +342,7 @@ struct aspeed_video {
> bool yuv420;
> enum aspeed_video_format format;
> bool hq_mode;
> + enum aspeed_video_input input;
> unsigned int frame_rate;
> unsigned int jpeg_quality;
> unsigned int jpeg_hq_quality;
> @@ -331,21 +358,25 @@ struct aspeed_video {
> #define to_aspeed_video(x) container_of((x), struct aspeed_video, v4l2_dev)
>
> struct aspeed_video_config {
> + u32 version;
> u32 jpeg_mode;
> u32 comp_size_read;
> };
>
> static const struct aspeed_video_config ast2400_config = {
> + .version = 4,
> .jpeg_mode = AST2400_VE_SEQ_CTRL_JPEG_MODE,
> .comp_size_read = AST2400_VE_COMP_SIZE_READ_BACK,
> };
>
> static const struct aspeed_video_config ast2500_config = {
> + .version = 5,
> .jpeg_mode = AST2500_VE_SEQ_CTRL_JPEG_MODE,
> .comp_size_read = AST2400_VE_COMP_SIZE_READ_BACK,
> };
>
> static const struct aspeed_video_config ast2600_config = {
> + .version = 6,
> .jpeg_mode = AST2500_VE_SEQ_CTRL_JPEG_MODE,
> .comp_size_read = AST2600_VE_COMP_SIZE_READ_BACK,
> };
> @@ -485,6 +516,7 @@ static const struct v4l2_dv_timings_cap aspeed_video_timings_cap = {
>
> static const char * const format_str[] = {"Standard JPEG",
> "Aspeed JPEG"};
> +static const char * const input_str[] = {"VGA", "BMC GFX"};
>
> static unsigned int debug;
>
> @@ -609,6 +641,14 @@ static int aspeed_video_start_frame(struct aspeed_video *video)
> aspeed_video_free_buf(video, &video->bcd);
> }
>
> + if (video->input == VIDEO_INPUT_GFX) {
> + u32 val;
> +
> + // update input buffer address as gfx's
> + regmap_read(video->gfx, GFX_DISPLAY_ADDR, &val);
> + aspeed_video_write(video, VE_TGS_0, val);
> + }
> +
> spin_lock_irqsave(&video->lock, flags);
> buf = list_first_entry_or_null(&video->buffers,
> struct aspeed_video_buffer, link);
> @@ -1026,9 +1066,23 @@ static void aspeed_video_get_timings(struct aspeed_video *v,
> }
> }
>
> +static void aspeed_video_get_resolution_gfx(struct aspeed_video *video,
> + struct v4l2_bt_timings *det)
> +{
> + u32 h_val, v_val;
> +
> + regmap_read(video->gfx, GFX_H_DISPLAY, &h_val);
> + regmap_read(video->gfx, GFX_V_DISPLAY, &v_val);
> +
> + det->width = FIELD_GET(GFX_H_DISPLAY_DE, h_val) + 1;
> + det->height = FIELD_GET(GFX_V_DISPLAY_DE, v_val) + 1;
> + video->v4l2_input_status = 0;
> +}
> +
> #define res_check(v) test_and_clear_bit(VIDEO_MODE_DETECT_DONE, &(v)->flags)
>
> -static void aspeed_video_get_resolution(struct aspeed_video *video)
> +static void aspeed_video_get_resolution_vga(struct aspeed_video *video,
> + struct v4l2_bt_timings *det)
> {
> bool invalid_resolution = true;
> int rc;
> @@ -1036,7 +1090,6 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
> u32 mds;
> u32 src_lr_edge;
> u32 src_tb_edge;
> - struct v4l2_bt_timings *det = &video->detected_timings;
>
> det->width = MIN_WIDTH;
> det->height = MIN_HEIGHT;
> @@ -1113,14 +1166,20 @@ static void aspeed_video_get_resolution(struct aspeed_video *video)
>
> aspeed_video_get_timings(video, det);
>
> - /*
> - * Enable mode-detect watchdog, resolution-change watchdog and
> - * automatic compression after frame capture.
> - */
> + /* Enable mode-detect watchdog, resolution-change watchdog */
> aspeed_video_update(video, VE_INTERRUPT_CTRL, 0,
> VE_INTERRUPT_MODE_DETECT_WD);
> - aspeed_video_update(video, VE_SEQ_CTRL, 0,
> - VE_SEQ_CTRL_AUTO_COMP | VE_SEQ_CTRL_EN_WATCHDOG);
> + aspeed_video_update(video, VE_SEQ_CTRL, 0, VE_SEQ_CTRL_EN_WATCHDOG);
> +}
> +
> +static void aspeed_video_get_resolution(struct aspeed_video *video)
> +{
> + struct v4l2_bt_timings *det = &video->detected_timings;
> +
> + if (video->input == VIDEO_INPUT_GFX)
> + aspeed_video_get_resolution_gfx(video, det);
> + else
> + aspeed_video_get_resolution_vga(video, det);
>
> v4l2_dbg(1, debug, &video->v4l2_dev, "Got resolution: %dx%d\n",
> det->width, det->height);
> @@ -1156,7 +1215,7 @@ static void aspeed_video_set_resolution(struct aspeed_video *video)
> aspeed_video_write(video, VE_SRC_SCANLINE_OFFSET, act->width * 4);
>
> /* Don't use direct mode below 1024 x 768 (irqs don't fire) */
> - if (size < DIRECT_FETCH_THRESHOLD) {
> + if (video->input == VIDEO_INPUT_VGA && size < DIRECT_FETCH_THRESHOLD) {
> v4l2_dbg(1, debug, &video->v4l2_dev, "Capture: Sync Mode\n");
> aspeed_video_write(video, VE_TGS_0,
> FIELD_PREP(VE_TGS_FIRST,
> @@ -1171,10 +1230,20 @@ static void aspeed_video_set_resolution(struct aspeed_video *video)
> VE_CTRL_INT_DE | VE_CTRL_DIRECT_FETCH,
> VE_CTRL_INT_DE);
> } else {
> + u32 ctrl, val, bpp;
> +
> v4l2_dbg(1, debug, &video->v4l2_dev, "Capture: Direct Mode\n");
> + ctrl = VE_CTRL_DIRECT_FETCH;
> + if (video->input == VIDEO_INPUT_GFX) {
> + regmap_read(video->gfx, GFX_CTRL, &val);
> + bpp = FIELD_GET(GFX_CTRL_FMT, val) ? 32 : 16;
> + if (bpp == 16)
> + ctrl |= VE_CTRL_INT_DE;
> + aspeed_video_write(video, VE_TGS_1, act->width * (bpp >> 3));
> + }
> aspeed_video_update(video, VE_CTRL,
> VE_CTRL_INT_DE | VE_CTRL_DIRECT_FETCH,
> - VE_CTRL_DIRECT_FETCH);
> + ctrl);
> }
>
> size *= 4;
> @@ -1207,6 +1276,22 @@ static void aspeed_video_set_resolution(struct aspeed_video *video)
> aspeed_video_free_buf(video, &video->srcs[0]);
> }
>
> +/*
> + * Update relative parameters when timing changed.
> + *
> + * @video: the struct of aspeed_video
> + * @timings: the new timings
> + */
> +static void aspeed_video_update_timings(struct aspeed_video *video, struct v4l2_bt_timings *timings)
> +{
> + video->active_timings = *timings;
> + aspeed_video_set_resolution(video);
> +
> + video->pix_fmt.width = timings->width;
> + video->pix_fmt.height = timings->height;
> + video->pix_fmt.sizeimage = video->max_compressed_size;
> +}
> +
> static void aspeed_video_update_regs(struct aspeed_video *video)
> {
> u8 jpeg_hq_quality = clamp((int)video->jpeg_hq_quality - 1, 0,
> @@ -1219,6 +1304,8 @@ static void aspeed_video_update_regs(struct aspeed_video *video)
> u32 ctrl = 0;
> u32 seq_ctrl = 0;
>
> + v4l2_dbg(1, debug, &video->v4l2_dev, "input(%s)\n",
> + input_str[video->input]);
> v4l2_dbg(1, debug, &video->v4l2_dev, "framerate(%d)\n",
> video->frame_rate);
> v4l2_dbg(1, debug, &video->v4l2_dev, "jpeg format(%s) subsample(%s)\n",
> @@ -1234,6 +1321,9 @@ static void aspeed_video_update_regs(struct aspeed_video *video)
> else
> aspeed_video_update(video, VE_BCD_CTRL, VE_BCD_CTRL_EN_BCD, 0);
>
> + if (video->input == VIDEO_INPUT_VGA)
> + ctrl |= VE_CTRL_AUTO_OR_CURSOR;
> +
> if (video->frame_rate)
> ctrl |= FIELD_PREP(VE_CTRL_FRC, video->frame_rate);
>
> @@ -1252,7 +1342,9 @@ static void aspeed_video_update_regs(struct aspeed_video *video)
> aspeed_video_update(video, VE_SEQ_CTRL,
> video->jpeg_mode | VE_SEQ_CTRL_YUV420,
> seq_ctrl);
> - aspeed_video_update(video, VE_CTRL, VE_CTRL_FRC, ctrl);
> + aspeed_video_update(video, VE_CTRL,
> + VE_CTRL_FRC | VE_CTRL_AUTO_OR_CURSOR |
> + VE_CTRL_SOURCE, ctrl);
> aspeed_video_update(video, VE_COMP_CTRL,
> VE_COMP_CTRL_DCT_LUM | VE_COMP_CTRL_DCT_CHR |
> VE_COMP_CTRL_EN_HQ | VE_COMP_CTRL_HQ_DCT_LUM |
> @@ -1280,6 +1372,7 @@ static void aspeed_video_init_regs(struct aspeed_video *video)
> aspeed_video_write(video, VE_JPEG_ADDR, video->jpeg.dma);
>
> /* Set control registers */
> + aspeed_video_write(video, VE_SEQ_CTRL, VE_SEQ_CTRL_AUTO_COMP);
> aspeed_video_write(video, VE_CTRL, ctrl);
> aspeed_video_write(video, VE_COMP_CTRL, VE_COMP_CTRL_RSVD);
>
> @@ -1311,12 +1404,7 @@ static void aspeed_video_start(struct aspeed_video *video)
> aspeed_video_get_resolution(video);
>
> /* Set timings since the device is being opened for the first time */
> - video->active_timings = video->detected_timings;
> - aspeed_video_set_resolution(video);
> -
> - video->pix_fmt.width = video->active_timings.width;
> - video->pix_fmt.height = video->active_timings.height;
> - video->pix_fmt.sizeimage = video->max_compressed_size;
> + aspeed_video_update_timings(video, &video->detected_timings);
> }
>
> static void aspeed_video_stop(struct aspeed_video *video)
> @@ -1414,16 +1502,47 @@ static int aspeed_video_enum_input(struct file *file, void *fh,
>
> static int aspeed_video_get_input(struct file *file, void *fh, unsigned int *i)
> {
> - *i = 0;
> + struct aspeed_video *video = video_drvdata(file);
> +
> + *i = video->input;
>
> return 0;
> }
>
> static int aspeed_video_set_input(struct file *file, void *fh, unsigned int i)
> {
> - if (i)
> + struct aspeed_video *video = video_drvdata(file);
> +
> + if (i >= VIDEO_INPUT_MAX)
> return -EINVAL;
>
> + if (IS_ERR(video->scu)) {
> + v4l2_dbg(1, debug, &video->v4l2_dev, "%s: scu isn't ready for input-control\n", __func__);
> + return -EINVAL;
> + }
> +
> + if (IS_ERR(video->gfx) && i == VIDEO_INPUT_GFX) {
> + v4l2_dbg(1, debug, &video->v4l2_dev, "%s: gfx isn't ready for GFX input\n", __func__);
> + return -EINVAL;
> + }
> +
> + video->input = i;
> +
> + if (video->version == 6) {
> + /* modify dpll source per current input */
> + if (video->input == VIDEO_INPUT_VGA)
> + regmap_update_bits(video->scu, SCU_MISC_CTRL, SCU_DPLL_SOURCE, 0);
> + else
> + regmap_update_bits(video->scu, SCU_MISC_CTRL, SCU_DPLL_SOURCE, SCU_DPLL_SOURCE);
> + }
> +
> + aspeed_video_update_regs(video);
> +
> + /* update signal status */
> + aspeed_video_get_resolution(video);
> + if (!video->v4l2_input_status)
> + aspeed_video_update_timings(video, &video->detected_timings);
> +
> return 0;
> }
You forgot to update aspeed_video_enum_input()!
If possible, always run v4l2-compliance (directly build from the v4l-utils git repo) whenever
you make changes to ioctls like this, it would have caught this.
Regards,
Hans
>
> @@ -1527,13 +1646,7 @@ static int aspeed_video_set_dv_timings(struct file *file, void *fh,
> if (vb2_is_busy(&video->queue))
> return -EBUSY;
>
> - video->active_timings = timings->bt;
> -
> - aspeed_video_set_resolution(video);
> -
> - video->pix_fmt.width = timings->bt.width;
> - video->pix_fmt.height = timings->bt.height;
> - video->pix_fmt.sizeimage = video->max_compressed_size;
> + aspeed_video_update_timings(video, &timings->bt);
>
> timings->type = V4L2_DV_BT_656_1120;
>
> @@ -1911,6 +2024,7 @@ static int aspeed_video_debugfs_show(struct seq_file *s, void *data)
> val08 = aspeed_video_read(v, VE_CTRL);
> if (FIELD_GET(VE_CTRL_DIRECT_FETCH, val08)) {
> seq_printf(s, " %-20s:\tDirect fetch\n", "Mode");
> + seq_printf(s, " %-20s:\t%s\n", "Input", input_str[v->input]);
> seq_printf(s, " %-20s:\t%s\n", "VGA bpp mode",
> FIELD_GET(VE_CTRL_INT_DE, val08) ? "16" : "32");
> } else {
> @@ -2070,12 +2184,34 @@ static int aspeed_video_setup_video(struct aspeed_video *video)
> return 0;
> }
>
> +/*
> + * Get regmap without checking res, such as clk/reset, that could lead to
> + * conflict.
> + */
> +static struct regmap *aspeed_regmap_lookup(struct device_node *np, const char *property)
> +{
> + struct device_node *syscon_np;
> + struct regmap *regmap;
> +
> + syscon_np = of_parse_phandle(np, property, 0);
> + if (!syscon_np)
> + return ERR_PTR(-ENODEV);
> +
> + regmap = device_node_to_regmap(syscon_np);
> + of_node_put(syscon_np);
> +
> + return regmap;
> +}
> +
> static int aspeed_video_init(struct aspeed_video *video)
> {
> int irq;
> int rc;
> struct device *dev = video->dev;
>
> + video->scu = aspeed_regmap_lookup(dev->of_node, "aspeed,scu");
> + video->gfx = aspeed_regmap_lookup(dev->of_node, "aspeed,gfx");
> +
> irq = irq_of_parse_and_map(dev->of_node, 0);
> if (!irq) {
> dev_err(dev, "Unable to find IRQ\n");
> @@ -2167,6 +2303,7 @@ static int aspeed_video_probe(struct platform_device *pdev)
> if (!config)
> return -ENODEV;
>
> + video->version = config->version;
> video->jpeg_mode = config->jpeg_mode;
> video->comp_size_read = config->comp_size_read;
>
> diff --git a/include/uapi/linux/aspeed-video.h b/include/uapi/linux/aspeed-video.h
> index 6586a65548c4..15168e8c931e 100644
> --- a/include/uapi/linux/aspeed-video.h
> +++ b/include/uapi/linux/aspeed-video.h
> @@ -8,6 +8,13 @@
>
> #include <linux/v4l2-controls.h>
>
> +/* aspeed video's input types */
> +enum aspeed_video_input {
> + VIDEO_INPUT_VGA = 0,
> + VIDEO_INPUT_GFX,
> + VIDEO_INPUT_MAX
> +};
> +
> #define V4L2_CID_ASPEED_HQ_MODE (V4L2_CID_USER_ASPEED_BASE + 1)
> #define V4L2_CID_ASPEED_HQ_JPEG_QUALITY (V4L2_CID_USER_ASPEED_BASE + 2)
>
>
> base-commit: e9d22f7a6655941fc8b2b942ed354ec780936b3e
