Hi Benjamin, Am Mittwoch, 7. August 2024, 10:10:28 CEST schrieb Benjamin Bara: > Currently, the V4L2 subdevice is also created when the device is not > available/connected. In this case, dmesg shows the following: > > [ 10.419510] imx290 7-001a: Error writing reg 0x301c: -6 > [ 10.428981] imx290 7-001a: Error writing reg 0x3020: -6 > [ 10.442712] imx290 7-001a: Error writing reg 0x3018: -6 > [ 10.454018] imx290 7-001a: Error writing reg 0x3020: -6 > > which seems to come from imx290_ctrl_update() after the subdev init is > finished. However, as the errors are ignored, the subdev is initialized > but simply does not work. From userspace perspective, there is no > visible difference between a working and not-working subdevice (except > when trying it out or watching for the error message). > > This commit adds a simple availability check before starting with the > subdev initialization to error out instead. There is already a patch reading the ID register at [1]. This also reads the ID register. But I don't have any documentation regarding that register, neither address nor values definitions. If there is known information about that I would prefer reading the ID and compare it to expected values. Best regards, Alexander [1] https://gitlab.com/ideasonboard/nxp/linux/-/commit/85ce725f1de7c16133bfb92b2ab0d3d84efcdb47 > Signed-off-by: Benjamin Bara <benjamin.bara@xxxxxxxxxxx> > --- > drivers/media/i2c/imx290.c | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c > index 4150e6e4b9a6..a86076e42a36 100644 > --- a/drivers/media/i2c/imx290.c > +++ b/drivers/media/i2c/imx290.c > @@ -1580,6 +1580,11 @@ static int imx290_probe(struct i2c_client *client) > pm_runtime_set_autosuspend_delay(dev, 1000); > pm_runtime_use_autosuspend(dev); > > + /* Make sure the sensor is available before V4L2 subdev init. */ > + ret = cci_read(imx290->regmap, IMX290_STANDBY, NULL, NULL); > + if (ret) > + goto err_pm; > + > /* Initialize the V4L2 subdev. */ > ret = imx290_subdev_init(imx290); > if (ret) > > -- TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany Amtsgericht München, HRB 105018 Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider http://www.tq-group.com/
