hi Still have one or two probs I have tried both anttis and jan trees, both of them compile but do not load modules or create dvb device when modprobed Using the realtek driver (1.4.2) I have the following issue one (and now only one) mux fails to pick up any channels, the channels are as clear as day my digibox with the same same connection >>> tune to: 530167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE WARNING: >>> tuning failed!!! The only difference I can see is this in dvbtune mux that works dvbtune -f 482167000 Using DVB card "Realtek RTL2832 DVB-T RTL2836 DTMB" tuning DVB-T (in United Kingdom) to 482167000 Hz polling.... Getting frontend event FE_STATUS: polling.... Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI FE_HAS_SYNC Event: Frequency: 492767000 SymbolRate: 0 FEC_inner: 2 Bit error rate: 206 Signal strength: 14135 SNR: 19 FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI FE_HAS_SYNC failing mux dvbtune -f 530167000 Using DVB card "Realtek RTL2832 DVB-T RTL2836 DTMB" tuning DVB-T (in United Kingdom) to 530167000 Hz polling.... Getting frontend event FE_STATUS: polling.... polling.... Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI FE_HAS_SYNC Event: Frequency: 540767000 SymbolRate: 0 FEC_inner: 2 Bit error rate: 19616 Signal strength: 14135 SNR: 16 FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI FE_HAS_SYNC The only difference I can see is the SNR and ber (19616) any ideas -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
