Re: [PATCH v6 08/18] media: Documentation: Add Mali-C55 ISP Documentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Dan,

Thank you for the patch.

On Tue, Jul 09, 2024 at 02:28:56PM +0100, Daniel Scally wrote:
> Add a documentation page for the mali-c55 driver, which gives a brief
> overview of the hardware and explains how to use the driver's capture
> devices and the crop/scaler functions.
> 
> Acked-by: Nayden Kanchev <nayden.kanchev@xxxxxxx>
> Co-developed-by: Jacopo Mondi <jacopo.mondi@xxxxxxxxxxxxxxxx>
> Signed-off-by: Jacopo Mondi <jacopo.mondi@xxxxxxxxxxxxxxxx>
> Signed-off-by: Daniel Scally <dan.scally@xxxxxxxxxxxxxxxx>

Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>

> ---
> Changes in v6:
> 
> 	- Minor formatting changes
> 
> Changes in v5:
> 
> 	- None
> 
> Changes in v4:
> 	- None
> 
> Changes in v3:
> 	- Documented the synchronised buffer sequence numbers (Sakari)
> 	- Clarified that the downscale pipe cannot output raw data, the ISP'S
> 	  resolution limits and choice of media bus format code (Kieran)
> 
> Changes in v2:
> 
> 	- none
> 
>  .../admin-guide/media/mali-c55-graph.dot      |  19 +
>  Documentation/admin-guide/media/mali-c55.rst  | 340 ++++++++++++++++++
>  .../admin-guide/media/v4l-drivers.rst         |   1 +
>  3 files changed, 360 insertions(+)
>  create mode 100644 Documentation/admin-guide/media/mali-c55-graph.dot
>  create mode 100644 Documentation/admin-guide/media/mali-c55.rst
> 
> diff --git a/Documentation/admin-guide/media/mali-c55-graph.dot b/Documentation/admin-guide/media/mali-c55-graph.dot
> new file mode 100644
> index 000000000000..0775ba42bf4c
> --- /dev/null
> +++ b/Documentation/admin-guide/media/mali-c55-graph.dot
> @@ -0,0 +1,19 @@
> +digraph board {
> +        rankdir=TB
> +        n00000001 [label="{{} | mali-c55 tpg\n/dev/v4l-subdev0 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
> +        n00000001:port0 -> n00000003:port0 [style=dashed]
> +        n00000003 [label="{{<port0> 0} | mali-c55 isp\n/dev/v4l-subdev1 | {<port1> 1 | <port2> 2}}", shape=Mrecord, style=filled, fillcolor=green]
> +        n00000003:port1 -> n00000007:port0 [style=bold]
> +        n00000003:port2 -> n00000007:port2 [style=bold]
> +        n00000003:port1 -> n0000000b:port0 [style=bold]
> +        n00000007 [label="{{<port0> 0 | <port2> 2} | mali-c55 resizer fr\n/dev/v4l-subdev2 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
> +        n00000007:port1 -> n0000000e [style=bold]
> +        n0000000b [label="{{<port0> 0} | mali-c55 resizer ds\n/dev/v4l-subdev3 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
> +        n0000000b:port1 -> n00000012 [style=bold]
> +        n0000000e [label="mali-c55 fr\n/dev/video0", shape=box, style=filled, fillcolor=yellow]
> +        n00000012 [label="mali-c55 ds\n/dev/video1", shape=box, style=filled, fillcolor=yellow]
> +        n00000022 [label="{{<port0> 0} | csi2-rx\n/dev/v4l-subdev4 | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
> +        n00000022:port1 -> n00000003:port0
> +        n00000027 [label="{{} | imx415 1-001a\n/dev/v4l-subdev5 | {<port0> 0}}", shape=Mrecord, style=filled, fillcolor=green]
> +        n00000027:port0 -> n00000022:port0 [style=bold]
> +}
> \ No newline at end of file
> diff --git a/Documentation/admin-guide/media/mali-c55.rst b/Documentation/admin-guide/media/mali-c55.rst
> new file mode 100644
> index 000000000000..72cdded507b3
> --- /dev/null
> +++ b/Documentation/admin-guide/media/mali-c55.rst
> @@ -0,0 +1,340 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +==========================================
> +ARM Mali-C55 Image Signal Processor driver
> +==========================================
> +
> +Introduction
> +============
> +
> +This file documents the driver for ARM's Mali-C55 Image Signal Processor. The
> +driver is located under drivers/media/platform/arm/mali-c55.
> +
> +The Mali-C55 ISP receives data in either raw Bayer format or RGB/YUV format from
> +sensors through either a parallel interface or a memory bus before processing it
> +and outputting it through an internal DMA engine. Two output pipelines are
> +possible (though one may not be fitted, depending on the implementation). These
> +are referred to as "Full resolution" and "Downscale", but the naming is historic
> +and both pipes are capable of cropping/scaling operations. The full resolution
> +pipe is also capable of outputting RAW data, bypassing much of the ISP's
> +processing. The downscale pipe cannot output RAW data. An integrated test
> +pattern generator can be used to drive the ISP and produce image data in the
> +absence of a connected camera sensor. The driver module is named mali_c55, and
> +is enabled through the CONFIG_VIDEO_MALI_C55 config option.
> +
> +The driver implements V4L2, Media Controller and V4L2 Subdevice interfaces and
> +expects camera sensors connected to the ISP to have V4L2 subdevice interfaces.
> +
> +Mali-C55 ISP hardware
> +=====================
> +
> +A high level functional view of the Mali-C55 ISP is presented below. The ISP
> +takes input from either a live source or through a DMA engine for memory input,
> +depending on the SoC integration.::
> +
> +  +---------+    +----------+                                     +--------+
> +  | Sensor  |--->| CSI-2 Rx |                "Full Resolution"    |  DMA   |
> +  +---------+    +----------+   |\                 Output    +--->| Writer |
> +                       |        | \                          |    +--------+
> +                       |        |  \    +----------+  +------+---> Streaming I/O
> +  +------------+       +------->|   |   |          |  |
> +  |            |                |   |-->| Mali-C55 |--+
> +  | DMA Reader |--------------->|   |   |    ISP   |  |
> +  |            |                |  /    |          |  |      +---> Streaming I/O
> +  +------------+                | /     +----------+  |      |
> +                                |/                    +------+
> +                                                             |    +--------+
> +                                                             +--->|  DMA   |
> +                                               "Downscaled"       | Writer |
> +                                                  Output          +--------+
> +
> +Media Controller Topology
> +=========================
> +
> +An example of the ISP's topology (as implemented in a system with an IMX415
> +camera sensor and generic CSI-2 receiver) is below:
> +
> +
> +.. kernel-figure:: mali-c55-graph.dot
> +    :alt:   mali-c55-graph.dot
> +    :align: center
> +
> +The driver has 4 V4L2 subdevices:
> +
> +- `mali_c55 isp`: Responsible for configuring input crop and color space
> +                  conversion
> +- `mali_c55 tpg`: The test pattern generator, emulating a camera sensor.
> +- `mali_c55 resizer fr`: The Full-Resolution pipe resizer
> +- `mali_c55 resizer ds`: The Downscale pipe resizer
> +
> +The driver has 2 V4L2 video devices:
> +
> +- `mali-c55 fr`: The full-resolution pipe's capture device
> +- `mali-c55 ds`: The downscale pipe's capture device
> +
> +Frame sequences are synchronised across to two capture devices, meaning if one
> +pipe is started later than the other the sequence numbers returned in its
> +buffers will match those of the other pipe rather than starting from zero.
> +
> +Idiosyncrasies
> +--------------
> +
> +**mali-c55 isp**
> +The `mali-c55 isp` subdevice has a single sink pad to which all sources of data
> +should be connected. The active source is selected by enabling the appropriate
> +media link and disabling all others. The ISP has two source pads, reflecting the
> +different paths through which it can internally route data. Tap points within
> +the ISP allow users to divert data to avoid processing by some or all of the
> +hardware's processing steps. The diagram below is intended only to highlight how
> +the bypassing works and is not a true reflection of those processing steps; for
> +a high-level functional block diagram see ARM's developer page for the
> +ISP [3]_::
> +
> +  +--------------------------------------------------------------+
> +  |                Possible Internal ISP Data Routes             |
> +  |          +------------+  +----------+  +------------+        |
> +  +---+      |            |  |          |  |  Colour    |    +---+
> +  | 0 |--+-->| Processing |->| Demosaic |->|   Space    |--->| 1 |
> +  +---+  |   |            |  |          |  | Conversion |    +---+
> +  |      |   +------------+  +----------+  +------------+        |
> +  |      |                                                   +---+
> +  |      +---------------------------------------------------| 2 |
> +  |                                                          +---+
> +  |                                                              |
> +  +--------------------------------------------------------------+
> +
> +
> +.. flat-table::
> +    :header-rows: 1
> +
> +    * - Pad
> +      - Direction
> +      - Purpose
> +
> +    * - 0
> +      - sink
> +      - Data input, connected to the TPG and camera sensors
> +
> +    * - 1
> +      - source
> +      - RGB/YUV data, connected to the FR and DS V4L2 subdevices
> +
> +    * - 2
> +      - source
> +      - RAW bayer data, connected to the FR V4L2 subdevices
> +
> +The ISP is limited to both input and output resolutions between 640x480 and
> +8192x8192, and this is reflected in the ISP and resizer subdevice's .set_fmt()
> +operations.
> +
> +**mali-c55 resizer fr**
> +The `mali-c55 resizer fr` subdevice has two _sink_ pads to reflect the different
> +insertion points in the hardware (either RAW or demosaiced data):
> +
> +.. flat-table::
> +    :header-rows: 1
> +
> +    * - Pad
> +      - Direction
> +      - Purpose
> +
> +    * - 0
> +      - sink
> +      - Data input connected to the ISP's demosaiced stream.
> +
> +    * - 1
> +      - source
> +      - Data output connected to the capture video device
> +
> +    * - 2
> +      - sink
> +      - Data input connected to the ISP's raw data stream
> +
> +The data source in use is selected through the routing API; two routes each of a
> +single stream are available:
> +
> +.. flat-table::
> +    :header-rows: 1
> +
> +    * - Sink Pad
> +      - Source Pad
> +      - Purpose
> +
> +    * - 0
> +      - 1
> +      - Demosaiced data route
> +
> +    * - 2
> +      - 1
> +      - Raw data route
> +
> +
> +If the demosaiced route is active then the FR pipe is only capable of output
> +in RGB/YUV formats. If the raw route is active then the output reflects the
> +input (which may be either Bayer or RGB/YUV data).
> +
> +Using the driver to capture video
> +=================================
> +
> +Using the media controller APIs we can configure the input source and ISP to
> +capture images in a variety of formats. In the examples below, configuring the
> +media graph is done with the v4l-utils [1]_ package's media-ctl utility.
> +Capturing the images is done with yavta [2]_.
> +
> +Configuring the input source
> +----------------------------
> +
> +The first step is to set the input source that we wish by enabling the correct
> +media link. Using the example topology above, we can select the TPG as follows:
> +
> +.. code-block:: none
> +
> +    media-ctl -l "'lte-csi2-rx':1->'mali-c55 isp':0[0]"
> +    media-ctl -l "'mali-c55 tpg':0->'mali-c55 isp':0[1]"
> +
> +Configuring which video devices will stream data
> +------------------------------------------------
> +
> +The driver will wait for all video devices to have their VIDIOC_STREAMON ioctl
> +called before it tells the sensor to start streaming. To facilitate this we need
> +to enable links to the video devices that we want to use. In the example below
> +we enable the links to both of the image capture video devices
> +
> +.. code-block:: none
> +
> +    media-ctl -l "'mali-c55 resizer fr':1->'mali-c55 fr':0[1]"
> +    media-ctl -l "'mali-c55 resizer ds':1->'mali-c55 ds':0[1]"
> +
> +Capturing bayer data from the source and processing to RGB/YUV
> +--------------------------------------------------------------
> +
> +To capture 1920x1080 bayer data from the source and push it through the ISP's
> +full processing pipeline, we configure the data formats appropriately on the
> +source, ISP and resizer subdevices and set the FR resizer's routing to select
> +processed data. The media bus format on the resizer's source pad will be either
> +RGB121212_1X36 or YUV10_1X30, depending on whether you want to capture RGB or
> +YUV. The ISP's debayering block outputs RGB data natively, setting the source
> +pad format to YUV10_1X30 enables the colour space conversion block.
> +
> +In this example we target RGB565 output, so select RGB121212_1X36 as the resizer
> +source pad's format:
> +
> +.. code-block:: none
> +
> +    # Set formats on the TPG and ISP
> +    media-ctl -V "'mali-c55 tpg':0[fmt:SRGGB20_1X20/1920x1080]"
> +    media-ctl -V "'mali-c55 isp':0[fmt:SRGGB20_1X20/1920x1080]"
> +    media-ctl -V "'mali-c55 isp':1[fmt:SRGGB20_1X20/1920x1080]"
> +
> +    # Set routing on the FR resizer
> +    media-ctl -R "'mali-c55 resizer fr'[0/0->1/0[1],2/0->1/0[0]]"
> +
> +    # Set format on the resizer, must be done AFTER the routing.
> +    media-ctl -V "'mali-c55 resizer fr':1[fmt:RGB121212_1X36/1920x1080]"
> +
> +The downscale output can also be used to stream data at the same time. In this
> +case since only processed data can be captured through the downscale output no
> +routing need be set:
> +
> +.. code-block:: none
> +
> +    # Set format on the resizer
> +    media-ctl -V "'mali-c55 resizer ds':1[fmt:RGB121212_1X36/1920x1080]"
> +
> +Following which images can be captured from both the FR and DS output's video
> +devices (simultaneously, if desired):
> +
> +.. code-block:: none
> +
> +    yavta -f RGB565 -s 1920x1080 -c10 /dev/video0
> +    yavta -f RGB565 -s 1920x1080 -c10 /dev/video1
> +
> +Cropping the image
> +~~~~~~~~~~~~~~~~~~
> +
> +Both the full resolution and downscale pipes can crop to a minimum resolution of
> +640x480. To crop the image simply configure the resizer's sink pad's crop and
> +compose rectangles and set the format on the video device:
> +
> +.. code-block:: none
> +
> +    media-ctl -V "'mali-c55 resizer fr':0[fmt:RGB121212_1X36/1920x1080 crop:(480,270)/640x480 compose:(0,0)/640x480]"
> +    media-ctl -V "'mali-c55 resizer fr':1[fmt:RGB121212_1X36/640x480]"
> +    yavta -f RGB565 -s 640x480 -c10 /dev/video0
> +
> +Downscaling the image
> +~~~~~~~~~~~~~~~~~~~~~
> +
> +Both the full resolution and downscale pipes can downscale the image by up to 8x
> +provided the minimum 640x480 output resolution is adhered to. For the best image
> +result the scaling ratio for each direction should be the same. To configure
> +scaling we use the compose rectangle on the resizer's sink pad:
> +
> +.. code-block:: none
> +
> +    media-ctl -V "'mali-c55 resizer fr':0[fmt:RGB121212_1X36/1920x1080 crop:(0,0)/1920x1080 compose:(0,0)/640x480]"
> +    media-ctl -V "'mali-c55 resizer fr':1[fmt:RGB121212_1X36/640x480]"
> +    yavta -f RGB565 -s 640x480 -c10 /dev/video0
> +
> +Capturing images in YUV formats
> +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> +
> +If we need to output YUV data rather than RGB the color space conversion block
> +needs to be active, which is achieved by setting MEDIA_BUS_FMT_YUV10_1X30 on the
> +resizer's source pad. We can then configure a capture format like NV12 (here in
> +its multi-planar variant)
> +
> +.. code-block:: none
> +
> +    media-ctl -V "'mali-c55 resizer fr':1[fmt:YUV10_1X30/1920x1080]"
> +    yavta -f NV12M -s 1920x1080 -c10 /dev/video0
> +
> +Capturing RGB data from the source and processing it with the resizers
> +----------------------------------------------------------------------
> +
> +The Mali-C55 ISP can work with sensors capable of outputting RGB data. In this
> +case although none of the image quality blocks would be used it can still
> +crop/scale the data in the usual way. For this reason RGB data input to the ISP
> +still goes through the ISP subdevice's pad 1 to the resizer.
> +
> +To achieve this, the ISP's sink pad's format is set to
> +MEDIA_BUS_FMT_RGB202020_1X60 - this reflects the format that data must be in to
> +work with the ISP. Converting the camera sensor's output to that format is the
> +responsibility of external hardware.
> +
> +In this example we ask the test pattern generator to give us RGB data instead of
> +bayer.
> +
> +.. code-block:: none
> +
> +    media-ctl -V "'mali-c55 tpg':0[fmt:RGB202020_1X60/1920x1080]"
> +    media-ctl -V "'mali-c55 isp':0[fmt:RGB202020_1X60/1920x1080]"
> +
> +Cropping or scaling the data can be done in exactly the same way as outlined
> +earlier.
> +
> +Capturing raw data from the source and outputting it unmodified
> +-----------------------------------------------------------------
> +
> +The ISP can additionally capture raw data from the source and output it on the
> +full resolution pipe only, completely unmodified. In this case the downscale
> +pipe can still process the data normally and be used at the same time.
> +
> +To configure raw bypass the FR resizer's subdevice's routing table needs to be
> +configured, followed by formats in the appropriate places:
> +
> +.. code-block:: none
> +
> +    media-ctl -R "'mali-c55 resizer fr'[0/0->1/0[0],2/0->1/0[1]]"
> +    media-ctl -V "'mali-c55 isp':0[fmt:RGB202020_1X60/1920x1080]"
> +    media-ctl -V "'mali-c55 resizer fr':2[fmt:RGB202020_1X60/1920x1080]"
> +    media-ctl -V "'mali-c55 resizer fr':1[fmt:RGB202020_1X60/1920x1080]"
> +
> +    # Set format on the video device and stream
> +    yavta -f RGB565 -s 1920x1080 -c10 /dev/video0
> +
> +References
> +==========
> +.. [1] https://git.linuxtv.org/v4l-utils.git/
> +.. [2] https://git.ideasonboard.org/yavta.git
> +.. [3] https://developer.arm.com/Processors/Mali-C55
> diff --git a/Documentation/admin-guide/media/v4l-drivers.rst b/Documentation/admin-guide/media/v4l-drivers.rst
> index 4120eded9a13..1d9485860d93 100644
> --- a/Documentation/admin-guide/media/v4l-drivers.rst
> +++ b/Documentation/admin-guide/media/v4l-drivers.rst
> @@ -18,6 +18,7 @@ Video4Linux (V4L) driver-specific documentation
>  	ipu3
>  	ipu6-isys
>  	ivtv
> +	mali-c55
>  	mgb4
>  	omap3isp
>  	omap4_camera

-- 
Regards,

Laurent Pinchart




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux