Rectify the logical value of reset-gpio so that it is set to 0 (disabled) during power-on and to 1 (enabled) during power-off. Meanwhile at it, set the reset-gpio to GPIO_OUT_HIGH at initialization time to make sure it starts off in reset. Fixes: 45d19b5fb9ae ("media: i2c: Add imx335 camera sensor driver") Signed-off-by: Umang Jain <umang.jain@xxxxxxxxxxxxxxxx> --- drivers/media/i2c/imx335.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/media/i2c/imx335.c b/drivers/media/i2c/imx335.c index cd150606a8a9..7241fc87ef84 100644 --- a/drivers/media/i2c/imx335.c +++ b/drivers/media/i2c/imx335.c @@ -1057,7 +1057,7 @@ static int imx335_parse_hw_config(struct imx335 *imx335) /* Request optional reset pin */ imx335->reset_gpio = devm_gpiod_get_optional(imx335->dev, "reset", - GPIOD_OUT_LOW); + GPIOD_OUT_HIGH); if (IS_ERR(imx335->reset_gpio)) { dev_err(imx335->dev, "failed to get reset gpio %ld\n", PTR_ERR(imx335->reset_gpio)); @@ -1171,7 +1171,7 @@ static int imx335_power_on(struct device *dev) usleep_range(500, 550); /* Tlow */ /* Set XCLR */ - gpiod_set_value_cansleep(imx335->reset_gpio, 1); + gpiod_set_value_cansleep(imx335->reset_gpio, 0); ret = clk_prepare_enable(imx335->inclk); if (ret) { @@ -1184,7 +1184,7 @@ static int imx335_power_on(struct device *dev) return 0; error_reset: - gpiod_set_value_cansleep(imx335->reset_gpio, 0); + gpiod_set_value_cansleep(imx335->reset_gpio, 1); regulator_bulk_disable(ARRAY_SIZE(imx335_supply_name), imx335->supplies); return ret; @@ -1201,7 +1201,7 @@ static int imx335_power_off(struct device *dev) struct v4l2_subdev *sd = dev_get_drvdata(dev); struct imx335 *imx335 = to_imx335(sd); - gpiod_set_value_cansleep(imx335->reset_gpio, 0); + gpiod_set_value_cansleep(imx335->reset_gpio, 1); clk_disable_unprepare(imx335->inclk); regulator_bulk_disable(ARRAY_SIZE(imx335_supply_name), imx335->supplies); -- 2.45.0