Am 01.12.2010 17:41, schrieb Stefan Ringel:
Am 01.12.2010 06:47, schrieb Dmitri Belimov:
Hi Stefan
Am 29.11.2010 09:44, schrieb Dmitri Belimov:
Hi
I try add IR for our TV cards.
After my some changes IR is working. But when I remove USB stick
from USB port
What has you change?
1. Add vendor-specific init code for IR.
2. Add vendor-specific key filter for IR.
I forgot, init code and key filter are implemented in the init tab.
Stefan Ringel
3. Add some code for show IR activity via power led
4. Move TV card defines to header file.
work it also with TM6010_REQ07_RD8_IR_WAKEUP_SEL = 0xff and
TM6010_REQ07_RD8_IR_WAKEUP_ADD = 0xff? I think, this both values are
setting the remote control address mask and so. And it is not good if
we set individual remote controls (better one setting for all).
Has it received keys?
Yes. I received keys, and can control any programm via lirc
Which protocol you it?
Our remotes has NEC protocol.
Damn, has you values for rc5 protocols, any idea?
As
I wrote that I haven't the right value for rc5 protocol, and nec
protocol works, that I have tested.
IR over int works well. But I found two main problems:
1. crash after remove
has you test it with lastest git branch (for_v2.6.38)?
2. disable IR after start video/radio. Try solve this problem right now.
sorry, I don't understand that.
I attched my diffs.
This file has some debug junk.
With my best regards, Dmitry.
Stefan Ringel
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
