On ISP_START, fill the stats buffer by reading out the metering space
in the ISP's memory. This is done for the non-active config just as
the dma transfer of the registers is. To acheive that, move the
checking of the current config outside of mali_c55_swap_next_config()
so we can use it for both functions.
Acked-by: Nayden Kanchev <nayden.kanchev@xxxxxxx>
Co-developed-by: Jacopo Mondi <jacopo.mondi@xxxxxxxxxxxxxxxx>
Signed-off-by: Jacopo Mondi <jacopo.mondi@xxxxxxxxxxxxxxxx>
Signed-off-by: Daniel Scally <dan.scally@xxxxxxxxxxxxxxxx>
---
Changes in v6:
- None
Changes in v5:
- New patch
.../platform/arm/mali-c55/mali-c55-core.c | 34 ++++++++++++++-----
1 file changed, 26 insertions(+), 8 deletions(-)
diff --git a/drivers/media/platform/arm/mali-c55/mali-c55-core.c b/drivers/media/platform/arm/mali-c55/mali-c55-core.c
index eedc8f450184..ed0db34767a4 100644
--- a/drivers/media/platform/arm/mali-c55/mali-c55-core.c
+++ b/drivers/media/platform/arm/mali-c55/mali-c55-core.c
@@ -567,15 +567,9 @@ static int mali_c55_check_hwcfg(struct mali_c55 *mali_c55)
return 0;
}
-static void mali_c55_swap_next_config(struct mali_c55 *mali_c55)
+static void mali_c55_swap_next_config(struct mali_c55 *mali_c55, u32 next_config)
{
struct mali_c55_context *ctx = mali_c55_get_active_context(mali_c55);
- u32 curr_config, next_config;
-
- curr_config = mali_c55_read(mali_c55, MALI_C55_REG_PING_PONG_READ);
- curr_config = (curr_config & MALI_C55_REG_PING_PONG_READ_MASK)
- >> (ffs(MALI_C55_REG_PING_PONG_READ_MASK) - 1);
- next_config = curr_config ^ 1;
mali_c55_update_bits(mali_c55, MALI_C55_REG_MCU_CONFIG,
MALI_C55_REG_MCU_CONFIG_WRITE_MASK,
@@ -588,6 +582,7 @@ static irqreturn_t mali_c55_isr(int irq, void *context)
{
struct device *dev = context;
struct mali_c55 *mali_c55 = dev_get_drvdata(dev);
+ u32 curr_config, next_config;
u32 interrupt_status;
unsigned int i, j;
@@ -612,7 +607,30 @@ static irqreturn_t mali_c55_isr(int irq, void *context)
for (j = i; j < MALI_C55_NUM_CAP_DEVS; j++)
mali_c55_set_next_buffer(&mali_c55->cap_devs[j]);
- mali_c55_swap_next_config(mali_c55);
+ /*
+ * When the ISP starts a frame we have some work to do:
+ *
+ * 1. Copy over the config for the **next** frame
+ * 2. Read out the metering stats for the **last** frame
+ */
+
+ curr_config = mali_c55_read(mali_c55,
+ MALI_C55_REG_PING_PONG_READ);
+ curr_config &= MALI_C55_REG_PING_PONG_READ_MASK;
+ curr_config >>= ffs(MALI_C55_REG_PING_PONG_READ_MASK) - 1;
+ next_config = curr_config ^ 1;
+
+ /*
+ * The ordering of these two is currently important as
+ * mali_c55_stats_fill_buffer() is asynchronous whereas
+ * mali_c55_swap_next_config() is not.
+ *
+ * TODO: Should mali_c55_swap_next_config() be async?
+ */
+ mali_c55_stats_fill_buffer(mali_c55,
+ next_config ? MALI_C55_CONFIG_PING :
+ MALI_C55_CONFIG_PONG);
+ mali_c55_swap_next_config(mali_c55, next_config);
break;
case MALI_C55_IRQ_ISP_DONE:
--
2.34.1
