Add a v4l2 sensor driver for Sony IMX728
v1->v2:
* Elaborate on device details in dt-bindings.
* Add links and voltage supplies to dt-bindings.
* Re-order so that dt-bindings are applied first.
* Move pattern gen config into v4l2_ctrls.
* Switch to using CCI functions to access the sensor.
* Merge header into c file.
* Move verbose prints to dev_dbg.
* Add missing v4l2 format params.
* Added support for software reset if no hardware one is available.
* Move register constants into defines, these are vague as Sony
requested that I not use register names from the datasheet.
v4l2-compliance 1.24.1, 64 bits, 64-bit time_t
Compliance test for device /dev/v4l-subdev4:
Driver Info:
Driver version : 6.1.80
Capabilities : 0x00000002
Streams Support
Required ioctls:
test VIDIOC_SUDBEV_QUERYCAP: OK
test invalid ioctls: OK
Allow for multiple opens:
test second /dev/v4l-subdev4 open: OK
test VIDIOC_SUBDEV_QUERYCAP: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 12 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK (Not Supported)
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK (Not Supported)
test VIDIOC_TRY_FMT: OK (Not Supported)
test VIDIOC_S_FMT: OK (Not Supported)
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK (Not Supported)
test VIDIOC_EXPBUF: OK (Not Supported)
test Requests: OK (Not Supported)
Total for device /dev/v4l-subdev4: 43, Succeeded: 43, Failed: 0, Warnings: 0
Spencer Hill (2):
media: i2c: Add driver for Sony IMX728
media: dt-bindings: Add Sony IMX728
.../bindings/media/i2c/sony,imx728.yaml | 78 +
MAINTAINERS | 9 +
drivers/media/i2c/Kconfig | 11 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/imx728.c | 1167 ++++++
drivers/media/i2c/imx728.h | 3458 +++++++++++++++++
6 files changed, 4724 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx728.yaml
create mode 100644 drivers/media/i2c/imx728.c
create mode 100644 drivers/media/i2c/imx728.h
--
2.40.1
---
Spencer Hill (2):
media: dt-bindings: Add Sony IMX728
media: i2c: Add driver for Sony IMX728
.../devicetree/bindings/media/i2c/sony,imx728.yaml | 119 +
MAINTAINERS | 7 +
drivers/media/i2c/Kconfig | 11 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/imx728.c | 4660 ++++++++++++++++++++
5 files changed, 4798 insertions(+)
---
base-commit: 8771b7f31b7fff91a998e6afdb60650d4bac59a5
change-id: 20240627-imx728-driver-a8d905cafd2d
Best regards,
--
Spencer Hill <shill@xxxxxxxxxxxxxxxxx>
Please be aware that this email includes email addresses outside of the organization.
