[PATCH 2/6] arm64: dts: qcom: sc7280: Add support for camss

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This change adds camera subsystem changes.

Signed-off-by: Suresh Vankadara <quic_svankada@xxxxxxxxxxx>
Signed-off-by: Trishansh Bhardwaj <quic_tbhardwa@xxxxxxxxxxx>
Signed-off-by: Vikram Sharma <quic_vikramsa@xxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 182 +++++++++++++++++++++++++++++++++++
 1 file changed, 182 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index f8256d5a8f6b..9ac251fec262 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -4415,6 +4415,188 @@ cci1_i2c1: i2c-bus@1 {
 			};
 		};
 
+		camss: camss@acaf000 {
+			compatible = "qcom,sc7280-camss";
+
+			reg = <0x0 0x0acaf000 0x0 0x5200>,
+			      <0x0 0x0acb6000 0x0 0x5200>,
+			      <0x0 0x0acbd000 0x0 0x5200>,
+			      <0x0 0x0acc4000 0x0 0x5000>,
+			      <0x0 0x0accb000 0x0 0x5000>,
+			      <0x0 0x0ace0000 0x0 0x2000>,
+			      <0x0 0x0ace2000 0x0 0x2000>,
+			      <0x0 0x0ace4000 0x0 0x2000>,
+			      <0x0 0x0ace6000 0x0 0x2000>,
+			      <0x0 0x0ace8000 0x0 0x2000>;
+
+			reg-names = "vfe0",
+				    "vfe1",
+				    "vfe2",
+				    "vfe_lite0",
+				    "vfe_lite1",
+				    "csiphy0",
+				    "csiphy1",
+				    "csiphy2",
+				    "csiphy3",
+				    "csiphy4";
+
+			interrupts = <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 640 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 641 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-names = "csiphy0",
+					  "csiphy1",
+					  "csiphy2",
+					  "csiphy3",
+					  "csiphy4",
+					  "csid0",
+					  "csid1",
+					  "csid2",
+					  "csid_lite0",
+					  "csid_lite1",
+					  "vfe0",
+					  "vfe1",
+					  "vfe2",
+					  "vfe_lite0",
+					  "vfe_lite1";
+
+			power-domains = <&camcc CAM_CC_IFE_0_GDSC>,
+					<&camcc CAM_CC_IFE_1_GDSC>,
+					<&camcc CAM_CC_IFE_2_GDSC>,
+					<&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+			clocks = <&gcc GCC_CAMERA_HF_AXI_CLK>,
+				 <&camcc CAM_CC_SLOW_AHB_CLK_SRC>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CAMNOC_AXI_CLK_SRC>,
+				 <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_CSIPHY0_CLK>,
+				 <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSI0PHYTIMER_CLK_SRC>,
+				 <&camcc CAM_CC_CSIPHY1_CLK>,
+				 <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSI1PHYTIMER_CLK_SRC>,
+				 <&camcc CAM_CC_CSIPHY2_CLK>,
+				 <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSI2PHYTIMER_CLK_SRC>,
+				 <&camcc CAM_CC_CSIPHY3_CLK>,
+				 <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSI3PHYTIMER_CLK_SRC>,
+				 <&camcc CAM_CC_CSIPHY4_CLK>,
+				 <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSI4PHYTIMER_CLK_SRC>,
+				 <&camcc CAM_CC_IFE_0_CSID_CLK>,
+				 <&camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
+				 <&camcc CAM_CC_IFE_0_CLK>,
+				 <&camcc CAM_CC_IFE_0_AXI_CLK>,
+				 <&camcc CAM_CC_CPHY_RX_CLK_SRC>,
+				 <&camcc CAM_CC_IFE_1_CSID_CLK>,
+				 <&camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
+				 <&camcc CAM_CC_IFE_1_CLK>,
+				 <&camcc CAM_CC_IFE_1_AXI_CLK>,
+				 <&camcc CAM_CC_IFE_2_CSID_CLK>,
+				 <&camcc CAM_CC_IFE_2_CPHY_RX_CLK>,
+				 <&camcc CAM_CC_IFE_2_CLK>,
+				 <&camcc CAM_CC_IFE_2_AXI_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_0_CSID_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_0_CPHY_RX_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_0_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_1_CSID_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_1_CPHY_RX_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_1_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_0_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_1_CLK>;
+
+			clock-names = "cam_hf_axi",
+				      "slow_ahb_src",
+				      "cpas_ahb",
+				      "camnoc_axi_src",
+				      "camnoc_axi",
+				      "csiphy0",
+				      "csiphy0_timer",
+				      "csiphy0_timer_src",
+				      "csiphy1",
+				      "csiphy1_timer",
+				      "csiphy1_timer_src",
+				      "csiphy2",
+				      "csiphy2_timer",
+				      "csiphy2_timer_src",
+				      "csiphy3",
+				      "csiphy3_timer",
+				      "csiphy3_timer_src",
+				      "csiphy4",
+				      "csiphy4_timer",
+				      "csiphy4_timer_src",
+				      "vfe0_csid",
+				      "vfe0_cphy_rx",
+				      "vfe0",
+				      "vfe0_axi",
+				      "csiphy_rx_src",
+				      "vfe1_csid",
+				      "vfe1_cphy_rx",
+				      "vfe1",
+				      "vfe1_axi",
+				      "vfe2_csid",
+				      "vfe2_cphy_rx",
+				      "vfe2",
+				      "vfe2_axi",
+				      "vfe0_lite_csid",
+				      "vfe0_lite_cphy_rx",
+				      "vfe0_lite",
+				      "vfe1_lite_csid",
+				      "vfe1_lite_cphy_rx",
+				      "vfe1_lite",
+				      "vfe_lite0",
+				      "vfe_lite1";
+
+			iommus = <&apps_smmu 0x800 0x4e0>;
+
+			interconnect-names = "cam_ahb",
+					     "cam_hf_0";
+
+			interconnects = <&gem_noc  MASTER_APPSS_PROC 0 &cnoc2 SLAVE_CAMERA_CFG 0>,
+					<&mmss_noc MASTER_CAMNOC_HF  0 &mc_virt SLAVE_EBI1     0>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+
+				port@2 {
+					reg = <2>;
+				};
+
+				port@3 {
+					reg = <3>;
+				};
+
+				port@4 {
+					reg = <4>;
+				};
+			};
+		};
+
 		camcc: clock-controller@ad00000 {
 			compatible = "qcom,sc7280-camcc";
 			reg = <0 0x0ad00000 0 0x10000>;

-- 
2.25.1





[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux