Re: [PATCH v2 01/13] media: cadence: csi2rx: Support runtime PM

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 27/06/2024 16:09, Jai Luthra wrote:
From: Jayshri Pawar <jpawar@xxxxxxxxxxx>

Use runtime power management hooks to save power when CSI-RX is not in
use. Also stop/start any in-progress streams, which might happen during
a system suspend/resume cycle.

Signed-off-by: Jayshri Pawar <jpawar@xxxxxxxxxxx>
Co-developed-by: Jai Luthra <j-luthra@xxxxxx>
Signed-off-by: Jai Luthra <j-luthra@xxxxxx>
---
  drivers/media/platform/cadence/cdns-csi2rx.c | 43 +++++++++++++++++++++++++++-
  1 file changed, 42 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/cadence/cdns-csi2rx.c b/drivers/media/platform/cadence/cdns-csi2rx.c
index 6f7d27a48eff..751eadbe61ef 100644
--- a/drivers/media/platform/cadence/cdns-csi2rx.c
+++ b/drivers/media/platform/cadence/cdns-csi2rx.c
@@ -366,6 +366,12 @@ static int csi2rx_s_stream(struct v4l2_subdev *subdev, int enable)
  	struct csi2rx_priv *csi2rx = v4l2_subdev_to_csi2rx(subdev);
  	int ret = 0;
+ if (enable) {
+		ret = pm_runtime_resume_and_get(csi2rx->dev);
+		if (ret < 0)
+			return ret;
+	}
+
  	mutex_lock(&csi2rx->lock);
if (enable) {
@@ -375,8 +381,10 @@ static int csi2rx_s_stream(struct v4l2_subdev *subdev, int enable)
  		 */
  		if (!csi2rx->count) {
  			ret = csi2rx_start(csi2rx);
-			if (ret)
+			if (ret) {
+				pm_runtime_put(csi2rx->dev);
  				goto out;
+			}
  		}
csi2rx->count++;
@@ -388,6 +396,8 @@ static int csi2rx_s_stream(struct v4l2_subdev *subdev, int enable)
  		 */
  		if (!csi2rx->count)
  			csi2rx_stop(csi2rx);
+
+		pm_runtime_put(csi2rx->dev);
  	}
out:
@@ -661,6 +671,29 @@ static int csi2rx_parse_dt(struct csi2rx_priv *csi2rx)
  	return ret;
  }
+static int csi2rx_suspend(struct device *dev)
+{
+	struct csi2rx_priv *csi2rx = dev_get_drvdata(dev);
+
+	mutex_lock(&csi2rx->lock);
+	if (csi2rx->count)
+		csi2rx_stop(csi2rx);
+	mutex_unlock(&csi2rx->lock);
+
+	return 0;
+}
+
+static int csi2rx_resume(struct device *dev)
+{
+	struct csi2rx_priv *csi2rx = dev_get_drvdata(dev);
+
+	mutex_lock(&csi2rx->lock);
+	if (csi2rx->count)
+		csi2rx_start(csi2rx);
+	mutex_unlock(&csi2rx->lock);
+	return 0;
+}
+

I don't think this looks correct. Afaik the runtime suspend/resume is not called on system suspend/resume. You could change the SET_RUNTIME_PM_OPS to use the same callbacks for runtime and system suspend, but I think that's a bad idea. Runtime suspend is not supposed to turn off the streaming. The driver is supposed to turn off the streaming, then call runtime_put, which would result in runtime suspend callback getting called.

 Tomi

  static int csi2rx_probe(struct platform_device *pdev)
  {
  	struct csi2rx_priv *csi2rx;
@@ -707,6 +740,7 @@ static int csi2rx_probe(struct platform_device *pdev)
  	if (ret)
  		goto err_cleanup;
+ pm_runtime_enable(csi2rx->dev);
  	ret = v4l2_async_register_subdev(&csi2rx->subdev);
  	if (ret < 0)
  		goto err_free_state;
@@ -721,6 +755,7 @@ static int csi2rx_probe(struct platform_device *pdev)
err_free_state:
  	v4l2_subdev_cleanup(&csi2rx->subdev);
+	pm_runtime_disable(csi2rx->dev);
  err_cleanup:
  	v4l2_async_nf_unregister(&csi2rx->notifier);
  	v4l2_async_nf_cleanup(&csi2rx->notifier);
@@ -739,9 +774,14 @@ static void csi2rx_remove(struct platform_device *pdev)
  	v4l2_async_unregister_subdev(&csi2rx->subdev);
  	v4l2_subdev_cleanup(&csi2rx->subdev);
  	media_entity_cleanup(&csi2rx->subdev.entity);
+	pm_runtime_disable(csi2rx->dev);
  	kfree(csi2rx);
  }
+static const struct dev_pm_ops csi2rx_pm_ops = {
+	SET_RUNTIME_PM_OPS(csi2rx_suspend, csi2rx_resume, NULL)
+};
+
  static const struct of_device_id csi2rx_of_table[] = {
  	{ .compatible = "starfive,jh7110-csi2rx" },
  	{ .compatible = "cdns,csi2rx" },
@@ -756,6 +796,7 @@ static struct platform_driver csi2rx_driver = {
  	.driver	= {
  		.name		= "cdns-csi2rx",
  		.of_match_table	= csi2rx_of_table,
+		.pm		= &csi2rx_pm_ops,
  	},
  };
  module_platform_driver(csi2rx_driver);






[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux