On Thu, Jun 27, 2024 at 03:38:03PM +0200, Alexander Stein wrote: > Hi Spencer, > > thanks for the patch. > > Am Mittwoch, 26. Juni 2024, 23:15:29 CEST schrieb Spencer Hill: > > Add bindings for Sony IMX728. > > > > Signed-off-by: Spencer Hill <shill@xxxxxxxxxxxxxxxxx> > > --- > > .../bindings/media/i2c/sony,imx728.yaml | 78 +++++++++++++++++++ > > MAINTAINERS | 9 +++ > > 2 files changed, 87 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx728.yaml > > > > diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx728.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx728.yaml > > new file mode 100644 > > index 000000000000..613042ab5abe > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx728.yaml > > @@ -0,0 +1,78 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/media/i2c/sony,imx728.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Sony IMX728 Camera Sensor > > + > > +maintainers: > > + - Spencer Hill <shill@xxxxxxxxxxxxxxxxx> > > + > > +description: |- > > + Sony IMX728 camera sensor. > > Are there some more information? Like max resolution, image format, bpp, framerate, etc. > I will add some more descriptive information about the sensor. Should information that is only relevant to the driver be included here? Or should I just describe the sensor? For example, the sensor supports a significant number of different modes, however only a single one is implemented in the driver at the moment, should I list the possible modes, or just the supported ones? > > + > > +properties: > > + compatible: > > + enum: > > + - sony,imx728 > > + > > + reg: > > + maxItems: 1 > > + > > + clocks: > > + maxItems: 1 > > + > > + clock-names: > > + const: inck > > Are there any restrictions about frequency? Like a specific set of > frequencies? > The sensor must be between 18MHz and 30MHz, I will add this to the description. > > + > > + xclr-gpios: > > reset-gpios, see sony.imx290.yaml > I will rename this here and in the driver. > > + maxItems: 1 > > + description: > > + Specifier for the GPIO connected to the XCLR (System Reset) pin. > > No voltage supplies? > I will add these. > > + > > + port: > > + $ref: /schemas/graph.yaml#/properties/port > > + additionalProperties: false > > + > > + properties: > > + endpoint: > > + $ref: ../video-interfaces.yaml# > > + unevaluatedProperties: false > > Which data-lane configuration is allowed? 4 lanes only? or 2 lanes? > > Best regards, > Alexander > The sensor supports both 4 and 2 lane modes, though only 4 is implemented at the moment. > > + > > +required: > > + - compatible > > + - reg > > + - clocks > > + - clock-names > > + - port > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + #include <dt-bindings/gpio/gpio.h> > > + > > + i2c { > > + clock-frequency = <400000>; > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + camera@1a { > > + compatible = "sony,imx728"; > > + reg = <0x1a>; > > + > > + clocks = <&fixed_clock>; > > + clock-names = "inck"; > > + > > + xclr-gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; > > + > > + port { > > + camera1: endpoint { > > + remote-endpoint = <&vin1a_ep>; > > + }; > > + }; > > + }; > > + }; > > + > > +... > > diff --git a/MAINTAINERS b/MAINTAINERS > > index ef6be9d95143..34fde35eb0bd 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -20589,6 +20589,15 @@ T: git git://linuxtv.org/media_tree.git > > F: Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml > > F: drivers/media/i2c/imx415.c > > > > +SONY IMX728 SENSOR DRIVER > > +M: Spencer Hill <shill@xxxxxxxxxxxxxxxxx> > > +L: linux-media@xxxxxxxxxxxxxxx > > +S: Maintained > > +T: git git://linuxtv.org/media_tree.git > > +F: Documentation/devicetree/bindings/media/i2c/sony,imx728.yaml > > +F: drivers/media/i2c/imx728.c > > +F: drivers/media/i2c/imx728.h > > + > > SONY MEMORYSTICK SUBSYSTEM > > M: Maxim Levitsky <maximlevitsky@xxxxxxxxx> > > M: Alex Dubov <oakad@xxxxxxxxx> > > -- > > 2.40.1 > > > > Please be aware that this email includes email addresses outside of the organization. > > > > > > > -- > TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany > Amtsgericht München, HRB 105018 > Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider > http://www.tq-group.com/ > > Please be aware that this email includes email addresses outside of the organization.