Re: [PATCH 3/6] media: qcom: camss: csiphy-3ph: Add Gen2 v1.2.2 two-phase MIPI CSI-2 DPHY init

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



resend with plain text

On Sat, Jun 22, 2024 at 7:20 PM Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> wrote:
>
> On 21.06.2024 1:25 PM, Bryan O'Donoghue wrote:
> > On 21/06/2024 10:40, George Chan via B4 Relay wrote:
> >> From: George Chan <gchan9527@xxxxxxxxx>
> >>
> >> Add a PHY configuration sequence for the sc7180 which uses a Qualcomm
> >> Gen 2 version 1.2.2 CSI-2 PHY.
> >>
> >> The PHY can be configured as two phase or three phase in C-PHY or D-PHY
> >> mode. This configuration supports two-phase D-PHY mode.
> >>
> >> Signed-off-by: George Chan <gchan9527@xxxxxxxxx>
> >> ---
> >>   .../platform/qcom/camss/camss-csiphy-3ph-1-0.c     | 120 +++++++++++++++++++++
> >>   1 file changed, 120 insertions(+)
> >>
> >> diff --git a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
> >> index df7e93a5a4f6..181bb7f7c300 100644
> >> --- a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
> >> +++ b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
> >> @@ -348,6 +348,121 @@ csiphy_reg_t lane_regs_sm8250[5][20] = {
> >>       },
> >>   };
> >>   +/* GEN2 1.2.2 2PH */
> >
> > This is the init sequence for 1_2_1 not 1_2_2

Yes, undesirable copy-n-paste result.

> >
> > https://review.lineageos.org/c/LineageOS/android_kernel_xiaomi_sm8250/+/311931/10/techpack/camera/drivers/cam_sensor_module/cam_csiphy/include/cam_csiphy_1_2_1_hwreg.h
> >
> > https://review.lineageos.org/c/LineageOS/android_kernel_xiaomi_sm8250/+/311931/10/techpack/camera/drivers/cam_sensor_module/cam_csiphy/include/cam_csiphy_1_2_2_hwreg.h
>
> FWIW 1.2.2 seems to be the desired one: [1]
>
> Konrad
>
> [1] https://git.codelinaro.org/clo/la/kernel/msm-4.14/-/blob/UC.UM.1.0.r1-02500-sa8155.0/arch/arm64/boot/dts/qcom/atoll-camera.dtsi#L22

Here is the log from sm7125 joyeuse phone, not sure if it helps or not.
[  204.034767] qcom-camss acb3000.camss: CSIPHY 3PH HW Version = 0x01000000

I carefully looked into this csiphy_2ph_v1_2_2_reg of various trees,
and concluded below version:
(1)atoll, sdm845[1]
(2)surya[2], sa8155, factory-trogdor-13443.B-chromeos-5.4[3]

I was tempted to use (1)atoll one but it looked like (2) is newer. Is
it worthy to create CAMSS_7125 specially for SM7125. Please give me
some advice about it.

Regards,
George

[1] https://github.com/LineageOS/android_kernel_xiaomi_sm6250/blob/lineage-21/drivers/media/platform/msm/camera/cam_sensor_module/cam_csiphy/include/cam_csiphy_1_2_2_hwreg.h
[2] https://github.com/LineageOS/android_kernel_xiaomi_surya/blob/lineage-21/drivers/media/platform/msm/camera/cam_sensor_module/cam_csiphy/include/cam_csiphy_1_2_2_hwreg.h
[3] https://chromium.googlesource.com/chromiumos/third_party/kernel/+/refs/heads/factory-trogdor-13443.B-chromeos-5.4/drivers/media/platform/camx/cam_sensor_module/cam_csiphy/include/cam_csiphy_1_2_2_hwreg.h





[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux