Re: [PATCH 1/6] media: dt-bindings: media: camss: Add qcom,sc7180-camss binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 21/06/2024 11:40, George Chan via B4 Relay wrote:
> From: George Chan <gchan9527@xxxxxxxxx>
> 
> Add bindings for qcom,sc7180-camss in order to support the camera
> subsystem for sm7125 as found in the Xiaomi Redmi 9 Pro cellphone.
> 
> Signed-off-by: George Chan <gchan9527@xxxxxxxxx>

Subject: just one media (first). No need to write media: media: ...


A nit, subject: drop second/last, redundant "binding". The "dt-bindings"
prefix is already stating that these are bindings.
See also:
https://elixir.bootlin.com/linux/v6.7-rc8/source/Documentation/devicetree/bindings/submitting-patches.rst#L18


> ---
>  .../bindings/media/qcom,sc7180-camss.yaml          | 324 +++++++++++++++++++++
>  1 file changed, 324 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/media/qcom,sc7180-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sc7180-camss.yaml
> new file mode 100644
> index 000000000000..4dc10c32ee9c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/qcom,sc7180-camss.yaml
> @@ -0,0 +1,324 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/qcom,sc7180-camss.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm CAMSS ISP

What is CAMSS?

> +
> +maintainers:
> +  - Robert Foss <robert.foss@xxxxxxxxxx>

For sure this is not true. Robert does not work in Linaro and I doubt he
cares that much about camss.

> +
> +description: |

Do not need '|' unless you need to preserve formatting.

> +  The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms
> +
> +properties:
> +  compatible:
> +    const: qcom,sc7180-camss
> +
> +  clocks:
> +    minItems: 25

Drop minItems

> +    maxItems: 25
> +
> +  clock-names:
> +    items:
> +      - const: camnoc_axi
> +      - const: cpas_ahb
> +      - const: cphy_rx_src
> +      - const: csi0
> +      - const: csi1
> +      - const: csi2
> +      - const: csiphy0
> +      - const: csiphy0_timer
> +      - const: csiphy1
> +      - const: csiphy1_timer
> +      - const: csiphy2
> +      - const: csiphy2_timer
> +      - const: csiphy3
> +      - const: csiphy3_timer
> +      - const: gcc_camera_ahb
> +      - const: gcc_camera_axi
> +      - const: soc_ahb
> +      - const: vfe0_axi
> +      - const: vfe0
> +      - const: vfe0_cphy_rx
> +      - const: vfe1_axi
> +      - const: vfe1
> +      - const: vfe1_cphy_rx
> +      - const: vfe_lite
> +      - const: vfe_lite_cphy_rx
> +
> +  interrupts:
> +    minItems: 10

Drop minItems

> +    maxItems: 10
> +
> +  interrupt-names:
> +    items:
> +      - const: csid0
> +      - const: csid1
> +      - const: csid2
> +      - const: csiphy0
> +      - const: csiphy1
> +      - const: csiphy2
> +      - const: csiphy3
> +      - const: vfe0
> +      - const: vfe1
> +      - const: vfe_lite
> +
> +  iommus:
> +    maxItems: 4
> +
> +  power-domains:
> +    items:
> +      - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller.
> +      - description: IFE1 GDSC - Image Front End, Global Distributed Switch Controller.
> +      - description: Titan GDSC - Titan ISP Block, Global Distributed Switch Controller.
> +
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    description:
> +      CSI input ports.
> +
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description:
> +          Input port for receiving CSI data.
> +
> +        properties:
> +          endpoint:
> +            $ref: video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              data-lanes:
> +                minItems: 1
> +                maxItems: 4
> +
> +            required:
> +              - data-lanes
> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description:
> +          Input port for receiving CSI data.
> +
> +        properties:
> +          endpoint:
> +            $ref: video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              data-lanes:
> +                minItems: 1
> +                maxItems: 4
> +
> +            required:
> +              - data-lanes
> +
> +      port@2:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description:
> +          Input port for receiving CSI data.
> +
> +        properties:
> +          endpoint:
> +            $ref: video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              data-lanes:
> +                minItems: 1
> +                maxItems: 4
> +
> +            required:
> +              - data-lanes
> +
> +      port@3:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description:
> +          Input port for receiving CSI data.
> +
> +        properties:
> +          endpoint:
> +            $ref: video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              data-lanes:
> +                minItems: 1
> +                maxItems: 4
> +
> +            required:
> +              - data-lanes
> +
> +  reg:
> +    minItems: 10

Drop minItems

> +    maxItems: 10
> +
> +  reg-names:
> +    items:
> +      - const: csid0
> +      - const: csid1
> +      - const: csid2
> +      - const: csiphy0
> +      - const: csiphy1
> +      - const: csiphy2
> +      - const: csiphy3
> +      - const: vfe0
> +      - const: vfe1
> +      - const: vfe_lite
> +
> +  vdda-phy-supply:
> +    description:
> +      Phandle to a regulator supply to PHY core block.
> +
> +  vdda-pll-supply:
> +    description:
> +      Phandle to 1.8V regulator supply to PHY refclk pll block.
> +
> +required:
> +  - clock-names
> +  - clocks
> +  - compatible

Keep the list ordered, the same as list properties.

> +  - interrupt-names
> +  - interrupts
> +  - iommus
> +  - power-domains
> +  - reg
> +  - reg-names
> +  - vdda-phy-supply
> +  - vdda-pll-supply
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/qcom,camcc-sc7180.h>
> +    #include <dt-bindings/clock/qcom,gcc-sc7180.h>
> +
> +    soc {
> +      #address-cells = <2>;
> +      #size-cells = <2>;
> +
> +      camss: camss@acb3000 {
> +        compatible = "qcom,sc7180-camss";
> +
> +        clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,
> +          <&clock_camcc CAM_CC_CPAS_AHB_CLK>,

Missed alignment with previous <.

> +          <&clock_camcc CAM_CC_IFE_0_CSID_CLK>,
> +          <&clock_camcc CAM_CC_IFE_1_CSID_CLK>,
> +          <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK>,
> +          <&clock_camcc CAM_CC_CSIPHY0_CLK>,
> +          <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK>,
> +          <&clock_camcc CAM_CC_CSIPHY1_CLK>,
> +          <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK>,
> +          <&clock_camcc CAM_CC_CSIPHY2_CLK>,
> +          <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK>,
> +          <&clock_camcc CAM_CC_CSIPHY3_CLK>,
> +          <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK>,
> +          <&gcc GCC_CAMERA_AHB_CLK>,
> +          <&gcc GCC_CAMERA_HF_AXI_CLK>,
> +          <&clock_camcc CAM_CC_SOC_AHB_CLK>,
> +          <&clock_camcc CAM_CC_IFE_0_AXI_CLK>,
> +          <&clock_camcc CAM_CC_IFE_0_CLK>,
> +          <&clock_camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
> +          <&clock_camcc CAM_CC_IFE_1_AXI_CLK>,
> +          <&clock_camcc CAM_CC_IFE_1_CLK>,
> +          <&clock_camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
> +          <&clock_camcc CAM_CC_IFE_LITE_CLK>,
> +          <&clock_camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>;
> +
> +        clock-names = "camnoc_axi",
> +          "cpas_ahb",

Same problem.

> +          "csi0",
> +          "csi1",
> +          "csi2",
> +          "csiphy0",
> +          "csiphy0_timer",
> +          "csiphy1",
> +          "csiphy1_timer",
> +          "csiphy2",
> +          "csiphy2_timer",
> +          "csiphy3",
> +          "csiphy3_timer",
> +          "gcc_camera_ahb",
> +          "gcc_camera_axi",
> +          "soc_ahb",
> +          "vfe0_axi",
> +          "vfe0",
> +          "vfe0_cphy_rx",
> +          "vfe1_axi",
> +          "vfe1",
> +          "vfe1_cphy_rx",
> +          "vfe_lite",
> +          "vfe_lite_cphy_rx";
> +
> +        interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
> +          <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
> +          <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
> +          <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
> +          <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>,
> +          <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
> +          <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>,
> +          <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
> +          <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>,
> +          <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>;
> +
> +        interrupt-names = "csid0",
> +          "csid1",
> +          "csid2",
> +          "csiphy0",
> +          "csiphy1",
> +          "csiphy2",
> +          "csiphy3",
> +          "vfe0",
> +          "vfe1",
> +          "vfe_lite";
> +
> +        iommus = <&apps_smmu 0x820 0x0>,
> +          <&apps_smmu 0x840 0x0>,
> +          <&apps_smmu 0x860 0x0>;
> +
> +        power-domains = <&camcc IFE_0_GDSC>,
> +          <&camcc IFE_1_GDSC>,
> +          <&camcc TITAN_TOP_GDSC>;
> +
> +        reg = <0 0xacb3000 0 0x1000>,

reg is always the second property. See DTS coding style.

> +          <0 0xacba000 0 0x1000>,
> +          <0 0xacc8000 0 0x1000>,
> +          <0 0xac65000 0 0x1000>,
> +          <0 0xac66000 0 0x1000>,
> +          <0 0xac67000 0 0x1000>,
> +          <0 0xac68000 0 0x1000>,
> +          <0 0xacaf000 0 0x4000>,
> +          <0 0xacb6000 0 0x4000>,
> +          <0 0xacc4000 0 0x4000>;
> +
> +        reg-names = "csid0",

So this will be the third property.



Best regards,
Krzysztof





[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux