Now that the adv748x CSI-2 transmitter driver validates the supported
formats, it is required for subdevices along the pipeline to produce
and consume the same media bus codes.
The adv748x analog front end driver use the 2X8 variant of the UYVY8
media bus code, while the CSI-2 transmitter use the 1X16 variant, which
is the correct one to use for the serial bus.
Make the adv748x afe use the 1X16 format variant to maintain the
pipeline validation correct.
Signed-off-by: Jacopo Mondi <jacopo.mondi@xxxxxxxxxxxxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
---
drivers/media/i2c/adv748x/adv748x-afe.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/media/i2c/adv748x/adv748x-afe.c b/drivers/media/i2c/adv748x/adv748x-afe.c
index 50d9fbadbe38..5edb3295dc58 100644
--- a/drivers/media/i2c/adv748x/adv748x-afe.c
+++ b/drivers/media/i2c/adv748x/adv748x-afe.c
@@ -114,7 +114,7 @@ static void adv748x_afe_fill_format(struct adv748x_afe *afe,
{
memset(fmt, 0, sizeof(*fmt));
- fmt->code = MEDIA_BUS_FMT_UYVY8_2X8;
+ fmt->code = MEDIA_BUS_FMT_UYVY8_1X16;
fmt->colorspace = V4L2_COLORSPACE_SMPTE170M;
fmt->field = V4L2_FIELD_ALTERNATE;
@@ -337,7 +337,7 @@ static int adv748x_afe_enum_mbus_code(struct v4l2_subdev *sd,
if (code->index != 0)
return -EINVAL;
- code->code = MEDIA_BUS_FMT_UYVY8_2X8;
+ code->code = MEDIA_BUS_FMT_UYVY8_1X16;
return 0;
}
--
2.45.2
