Add YAML device tree binding for GC05A2 CMOS image sensor, and the relevant MAINTAINERS entries. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx> Signed-off-by: Zhi Mao <zhi.mao@xxxxxxxxxxxx> --- .../bindings/media/i2c/galaxycore,gc05a2.yaml | 112 ++++++++++++++++++ 1 file changed, 112 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/galaxycore,gc05a2.yaml diff --git a/Documentation/devicetree/bindings/media/i2c/galaxycore,gc05a2.yaml b/Documentation/devicetree/bindings/media/i2c/galaxycore,gc05a2.yaml new file mode 100644 index 000000000000..0e7a7b5ac89f --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/galaxycore,gc05a2.yaml @@ -0,0 +1,112 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (c) 2023 MediaTek Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/galaxycore,gc05a2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GalaxyCore gc05a2 1/5" 5M Pixel MIPI CSI-2 sensor + +maintainers: + - Zhi Mao <zhi.mao@xxxxxxxxxxxx> + +description: + The gc05a2 is a raw image sensor with an MIPI CSI-2 image data + interface and CCI (I2C compatible) control bus. The output format + is raw Bayer. + +properties: + compatible: + const: galaxycore,gc05a2 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + dovdd-supply: true + + avdd-supply: true + + dvdd-supply: true + + reset-gpios: + description: Reference to the GPIO connected to the RESETB pin. + maxItems: 1 + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + description: + Output port node, single endpoint describing the CSI-2 transmitter. + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + oneOf: + - items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + - items: + - const: 1 + - const: 2 + + link-frequencies: true + + required: + - data-lanes + - link-frequencies + + required: + - endpoint + +required: + - compatible + - reg + - clocks + - dovdd-supply + - avdd-supply + - dvdd-supply + - reset-gpios + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + sensor@37 { + compatible = "galaxycore,gc05a2"; + reg = <0x37>; + + clocks = <&gc05a2_clk>; + + reset-gpios = <&pio 21 GPIO_ACTIVE_LOW>; + + avdd-supply = <&gc05a2_avdd>; + dovdd-supply = <&gc05a2_dovdd>; + dvdd-supply = <&gc05a2_dvdd>; + + port { + sensor_out: endpoint { + data-lanes = <1 2>; + link-frequencies = /bits/ 64 <448000000 224000000>; + remote-endpoint = <&seninf_csi_port_1_in>; + }; + }; + }; + }; + +... -- 2.25.1
