Drop privacy-LED GPIO control, after the privacy-LED GPIO control was added
to the ov5693 driver it was decided to model privacy-LEDs as LED class
devices and have them be controlled by the v4l2-core.
So this is dead code since on devices with privacy LEDs the led is not
a GPIO on the ov5693 fwnode, but rather is a LED class devices controlled
by the v4l2-core.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/media/i2c/ov5693.c | 10 ----------
1 file changed, 10 deletions(-)
diff --git a/drivers/media/i2c/ov5693.c b/drivers/media/i2c/ov5693.c
index 8deb28b55983..46b9ce111676 100644
--- a/drivers/media/i2c/ov5693.c
+++ b/drivers/media/i2c/ov5693.c
@@ -141,7 +141,6 @@ struct ov5693_device {
struct gpio_desc *reset;
struct gpio_desc *powerdown;
- struct gpio_desc *privacy_led;
struct regulator_bulk_data supplies[OV5693_NUM_SUPPLIES];
struct clk *xvclk;
@@ -657,7 +656,6 @@ static int ov5693_sensor_init(struct ov5693_device *ov5693)
static void ov5693_sensor_powerdown(struct ov5693_device *ov5693)
{
- gpiod_set_value_cansleep(ov5693->privacy_led, 0);
gpiod_set_value_cansleep(ov5693->reset, 1);
gpiod_set_value_cansleep(ov5693->powerdown, 1);
@@ -687,7 +685,6 @@ static int ov5693_sensor_powerup(struct ov5693_device *ov5693)
gpiod_set_value_cansleep(ov5693->powerdown, 0);
gpiod_set_value_cansleep(ov5693->reset, 0);
- gpiod_set_value_cansleep(ov5693->privacy_led, 1);
usleep_range(5000, 7500);
@@ -1201,13 +1198,6 @@ static int ov5693_configure_gpios(struct ov5693_device *ov5693)
return PTR_ERR(ov5693->powerdown);
}
- ov5693->privacy_led = devm_gpiod_get_optional(ov5693->dev, "privacy-led",
- GPIOD_OUT_LOW);
- if (IS_ERR(ov5693->privacy_led)) {
- dev_err(ov5693->dev, "Error fetching privacy-led GPIO\n");
- return PTR_ERR(ov5693->privacy_led);
- }
-
return 0;
}
--
2.45.1
