[PATCH v15 09/29] drm/display: hdmi: Add HDMI compute clock helper

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



A lot of HDMI drivers have some variation of the formula to calculate
the TMDS character rate from a mode, but few of them actually take all
parameters into account.

Let's create a helper to provide that rate taking all parameters into
account.

Reviewed-by: Dave Stevenson <dave.stevenson@xxxxxxxxxxxxxxx>
Signed-off-by: Maxime Ripard <mripard@xxxxxxxxxx>
---
 drivers/gpu/drm/display/drm_hdmi_helper.c | 61 +++++++++++++++++++++++++++++++
 include/drm/display/drm_hdmi_helper.h     |  4 ++
 2 files changed, 65 insertions(+)

diff --git a/drivers/gpu/drm/display/drm_hdmi_helper.c b/drivers/gpu/drm/display/drm_hdmi_helper.c
index faf5e9efa7d3..74dd4d01dd9b 100644
--- a/drivers/gpu/drm/display/drm_hdmi_helper.c
+++ b/drivers/gpu/drm/display/drm_hdmi_helper.c
@@ -193,5 +193,66 @@ void drm_hdmi_avi_infoframe_content_type(struct hdmi_avi_infoframe *frame,
 	}
 
 	frame->itc = conn_state->content_type != DRM_MODE_CONTENT_TYPE_NO_DATA;
 }
 EXPORT_SYMBOL(drm_hdmi_avi_infoframe_content_type);
+
+/**
+ * drm_hdmi_compute_mode_clock() - Computes the TMDS Character Rate
+ * @mode: Display mode to compute the clock for
+ * @bpc: Bits per character
+ * @fmt: Output Pixel Format used
+ *
+ * Returns the TMDS Character Rate for a given mode, bpc count and output format.
+ *
+ * RETURNS:
+ * The TMDS Character Rate, in Hertz, or 0 on error.
+ */
+unsigned long long
+drm_hdmi_compute_mode_clock(const struct drm_display_mode *mode,
+			    unsigned int bpc, enum hdmi_colorspace fmt)
+{
+	unsigned long long clock = mode->clock * 1000ULL;
+	unsigned int vic = drm_match_cea_mode(mode);
+
+	/*
+	 * CTA-861-G Spec, section 5.4 - Color Coding and Quantization
+	 * mandates that VIC 1 always uses 8 bpc.
+	 */
+	if (vic == 1 && bpc != 8)
+		return 0;
+
+	if (fmt == HDMI_COLORSPACE_YUV422) {
+		/*
+		 * HDMI 1.0 Spec, section 6.5 - Pixel Encoding states that
+		 * YUV422 sends 24 bits over three channels, with Cb and Cr
+		 * components being sent on odd and even pixels, respectively.
+		 *
+		 * If fewer than 12 bpc are sent, data are left justified.
+		 */
+		if (bpc > 12)
+			return 0;
+
+		/*
+		 * HDMI 1.0 Spec, section 6.5 - Pixel Encoding
+		 * specifies that YUV422 sends two 12-bits components over
+		 * three TMDS channels per pixel clock, which is equivalent to
+		 * three 8-bits components over three channels used by RGB as
+		 * far as the clock rate goes.
+		 */
+		bpc = 8;
+	}
+
+	/*
+	 * HDMI 2.0 Spec, Section 7.1 - YCbCr 4:2:0 Pixel Encoding
+	 * specifies that YUV420 encoding is carried at a TMDS Character Rate
+	 * equal to half the pixel clock rate.
+	 */
+	if (fmt == HDMI_COLORSPACE_YUV420)
+		clock = clock / 2;
+
+	if (mode->flags & DRM_MODE_FLAG_DBLCLK)
+		clock = clock * 2;
+
+	return DIV_ROUND_CLOSEST_ULL(clock * bpc, 8);
+}
+EXPORT_SYMBOL(drm_hdmi_compute_mode_clock);
diff --git a/include/drm/display/drm_hdmi_helper.h b/include/drm/display/drm_hdmi_helper.h
index 76d234826e22..57e3b18c15ec 100644
--- a/include/drm/display/drm_hdmi_helper.h
+++ b/include/drm/display/drm_hdmi_helper.h
@@ -22,6 +22,10 @@ drm_hdmi_infoframe_set_hdr_metadata(struct hdmi_drm_infoframe *frame,
 				    const struct drm_connector_state *conn_state);
 
 void drm_hdmi_avi_infoframe_content_type(struct hdmi_avi_infoframe *frame,
 					 const struct drm_connector_state *conn_state);
 
+unsigned long long
+drm_hdmi_compute_mode_clock(const struct drm_display_mode *mode,
+			    unsigned int bpc, enum hdmi_colorspace fmt);
+
 #endif

-- 
2.45.0





[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux