Re: [PATCH v2 linux-next] media: i2c: st-mipid02: replace of_node_put() with __free

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

I took sometime to reflect on this. Currently I favor drivers consistency.
Merging this patch as is would introduce some differences between the
vgxy61 and other drivers that follow the 'of_node_put' flow, which I
think is not an improvement.

Now, this patch is certainly good. Would it be possible to extend it to
all other drivers using the 'of_node_put' ?

That would the consistency issue while improving code quality at the
same time.

Thank you.


On 4/29/24 18:37, R Sundar wrote:
> Use the new cleanup magic to replace of_node_put() with
> __free(device_node) marking to auto release and to simplify the error
> paths.
> 
> Suggested-by: Julia Lawall <julia.lawall@xxxxxxxx>
> Signed-off-by: R Sundar <prosunofficial@xxxxxxxxx>
> ---
> 
> Changes since v1 - 
> 
> - Added missed out __free() marking in mipid02_parse_tx_ep().
> - In mipid02_parse_tx_ep(), In error case, return value is always -EINVAL.  so
> sending the -EINVAL instead of ret variable value. 
> 
> Link to v1 - https://lore.kernel.org/all/20240427095643.11486-1-prosunofficial@xxxxxxxxx/#t
> 
>  drivers/media/i2c/st-mipid02.c | 37 +++++++++-------------------------
>  1 file changed, 9 insertions(+), 28 deletions(-)
> 
> diff --git a/drivers/media/i2c/st-mipid02.c b/drivers/media/i2c/st-mipid02.c
> index f250640729ca..bd3cf94f8534 100644
> --- a/drivers/media/i2c/st-mipid02.c
> +++ b/drivers/media/i2c/st-mipid02.c
> @@ -715,31 +715,28 @@ static int mipid02_parse_rx_ep(struct mipid02_dev *bridge)
>  	struct v4l2_fwnode_endpoint ep = { .bus_type = V4L2_MBUS_CSI2_DPHY };
>  	struct i2c_client *client = bridge->i2c_client;
>  	struct v4l2_async_connection *asd;
> -	struct device_node *ep_node;
>  	int ret;
>  
>  	/* parse rx (endpoint 0) */
> -	ep_node = of_graph_get_endpoint_by_regs(bridge->i2c_client->dev.of_node,
> -						0, 0);
> +	struct device_node *ep_node __free(device_node) =
> +		of_graph_get_endpoint_by_regs(bridge->i2c_client->dev.of_node, 0, 0);
>  	if (!ep_node) {
>  		dev_err(&client->dev, "unable to find port0 ep");
> -		ret = -EINVAL;
> -		goto error;
> +		return -EINVAL;
>  	}
>  
>  	ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep_node), &ep);
>  	if (ret) {
>  		dev_err(&client->dev, "Could not parse v4l2 endpoint %d\n",
>  			ret);
> -		goto error_of_node_put;
> +		return ret;
>  	}
>  
>  	/* do some sanity checks */
>  	if (ep.bus.mipi_csi2.num_data_lanes > 2) {
>  		dev_err(&client->dev, "max supported data lanes is 2 / got %d",
>  			ep.bus.mipi_csi2.num_data_lanes);
> -		ret = -EINVAL;
> -		goto error_of_node_put;
> +		return -EINVAL;
>  	}
>  
>  	/* register it for later use */
> @@ -750,7 +747,6 @@ static int mipid02_parse_rx_ep(struct mipid02_dev *bridge)
>  	asd = v4l2_async_nf_add_fwnode_remote(&bridge->notifier,
>  					      of_fwnode_handle(ep_node),
>  					      struct v4l2_async_connection);
> -	of_node_put(ep_node);
>  
>  	if (IS_ERR(asd)) {
>  		dev_err(&client->dev, "fail to register asd to notifier %ld",
> @@ -764,46 +760,31 @@ static int mipid02_parse_rx_ep(struct mipid02_dev *bridge)
>  		v4l2_async_nf_cleanup(&bridge->notifier);
>  
>  	return ret;
> -
> -error_of_node_put:
> -	of_node_put(ep_node);
> -error:
> -
> -	return ret;
>  }
>  
>  static int mipid02_parse_tx_ep(struct mipid02_dev *bridge)
>  {
>  	struct v4l2_fwnode_endpoint ep = { .bus_type = V4L2_MBUS_PARALLEL };
>  	struct i2c_client *client = bridge->i2c_client;
> -	struct device_node *ep_node;
>  	int ret;
>  
>  	/* parse tx (endpoint 2) */
> -	ep_node = of_graph_get_endpoint_by_regs(bridge->i2c_client->dev.of_node,
> -						2, 0);
> +	struct device_node *ep_node __free(device_node) =
> +		of_graph_get_endpoint_by_regs(bridge->i2c_client->dev.of_node, 2, 0);
>  	if (!ep_node) {
>  		dev_err(&client->dev, "unable to find port1 ep");
> -		ret = -EINVAL;
> -		goto error;
> +		return -EINVAL;
>  	}
>  
>  	ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep_node), &ep);
>  	if (ret) {
>  		dev_err(&client->dev, "Could not parse v4l2 endpoint\n");
> -		goto error_of_node_put;
> +		return -EINVAL;
>  	}
>  
> -	of_node_put(ep_node);
>  	bridge->tx = ep;
>  
>  	return 0;
> -
> -error_of_node_put:
> -	of_node_put(ep_node);
> -error:
> -
> -	return -EINVAL;
>  }
>  
>  static int mipid02_probe(struct i2c_client *client)

-- 
Regards,

Benjamin




[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]

  Powered by Linux