Hello, On 2024-05-09 23:51:29 +0300, Laurent Pinchart wrote: > Hello, > > On Thu, May 09, 2024 at 06:13:50PM +0200, Jacopo Mondi wrote: > > v2->v3: > > - rcar-csi2: Collect v2.2 of [4/11] > > - adv748x: enum_mbus_code: reduce the number of formats to the ones supported > > by the HDMI and Analog front ends; > > - adv748x: enum_mbus_code: enumerate all formats on sink pad; enumerate the > > active format on the source pad > > - max9286: Apply the format to all pads to enforce all links to have the same > > format > > - max9286: Remove max9286_set_fsync_period() from setup > > > > v2->v1: > > - Remove "media: adv748x-csi2: Initialize subdev format" > > - Add "media: adv748x-afe: Use 1X16 media bus code" > > - Tested with CVBS > > - address comments from Laurent and Niklas > > > > A branch is available at > > https://git.kernel.org/pub/scm/linux/kernel/git/jmondi/linux.git/ > > jmondi/renesas-drivers-2024-04-23-v6.9-rc5/multistream-prep > > > > As a follow-up to the recently sent > > "media: renesas: rcar-csi2: Support multiple streams" series, this smaller > > version collects some fixes and implement usage of the subdev active state > > to simplify the R-Car CSI-2, ADV748x and MAX9286 drivers implementations. > > > > Tested with GMSL on Eagle V3M > > Tested with HDMI on Salvator-X > > Tested with CVBS on Salvator-X > > Boot tested on WhiteHawk V4H > > Niklas, would you be able to runtime-test this on V4H ? The series is > otherwise ready to be merged in my opinion. I have run-time tested this on Gen4 and it works as expected. I also tested on Gen2 and Gen3 and all looks good. Patch 7 needs to be moved earlier in the series to avoid breaking git bisect, but that move causes no conflicts so should be easy. With that fixed I too think this is ready to be merged. Nice work Jacopo! > > > Jacopo Mondi (11): > > media: rcar-vin: Fix YUYV8_1X16 handling for CSI-2 > > media: rcar-csi2: Disable runtime_pm in probe error > > media: rcar-csi2: Cleanup subdevice in remove() > > media: rcar-csi2: Use the subdev active state > > media: adv748x-csi2: Implement enum_mbus_codes > > media: adv748x-csi2: Validate the image format > > media: adv748x-csi2: Use the subdev active state > > media: adv748x-afe: Use 1X16 media bus code > > media: max9286: Fix enum_mbus_code > > media: max9286: Use the subdev active state > > media: max9286: Use frame interval from subdev state > > > > drivers/media/i2c/adv748x/adv748x-afe.c | 4 +- > > drivers/media/i2c/adv748x/adv748x-csi2.c | 145 +++++++++----- > > drivers/media/i2c/adv748x/adv748x.h | 1 - > > drivers/media/i2c/max9286.c | 182 +++++++----------- > > drivers/media/platform/renesas/rcar-csi2.c | 155 +++++++++------ > > .../platform/renesas/rcar-vin/rcar-dma.c | 16 +- > > 6 files changed, 271 insertions(+), 232 deletions(-) > > -- > Regards, > > Laurent Pinchart -- Kind Regards, Niklas Söderlund
