The YUYV8_1X16 and UYVY8_1X16 formats are treated as 'ITU-R
BT.601/BT.1358 16-bit YCbCr-422 input' (YUV16 - 0x5) in the R-Car VIN
driver and are thus disallowed when capturing frames from the R-Car
CSI-2 interface according to the hardware manual.
As the 1X16 format variants are meant to be used with serial busses they
have to be treated as 'YCbCr-422 8-bit data input' (0x1) when capturing
from CSI-2, which is a valid setting for CSI-2.
Commit 78b3f9d75a62 ("media: rcar-vin: Add check that input interface
and format are valid") disallowed capturing YUV16 when using the CSI-2
interface. Fix this by using YUV8_BT601 for YCbCr422 when CSI-2 is in
use.
Fixes: 78b3f9d75a62 ("media: rcar-vin: Add check that input interface and format are valid")
Signed-off-by: Jacopo Mondi <jacopo.mondi@xxxxxxxxxxxxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
---
.../media/platform/renesas/rcar-vin/rcar-dma.c | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)
diff --git a/drivers/media/platform/renesas/rcar-vin/rcar-dma.c b/drivers/media/platform/renesas/rcar-vin/rcar-dma.c
index e2c40abc6d3d..21d5b2815e86 100644
--- a/drivers/media/platform/renesas/rcar-vin/rcar-dma.c
+++ b/drivers/media/platform/renesas/rcar-vin/rcar-dma.c
@@ -742,12 +742,22 @@ static int rvin_setup(struct rvin_dev *vin)
*/
switch (vin->mbus_code) {
case MEDIA_BUS_FMT_YUYV8_1X16:
- /* BT.601/BT.1358 16bit YCbCr422 */
- vnmc |= VNMC_INF_YUV16;
+ if (vin->is_csi)
+ /* YCbCr422 8-bit */
+ vnmc |= VNMC_INF_YUV8_BT601;
+ else
+ /* BT.601/BT.1358 16bit YCbCr422 */
+ vnmc |= VNMC_INF_YUV16;
input_is_yuv = true;
break;
case MEDIA_BUS_FMT_UYVY8_1X16:
- vnmc |= VNMC_INF_YUV16 | VNMC_YCAL;
+ if (vin->is_csi)
+ /* YCbCr422 8-bit */
+ vnmc |= VNMC_INF_YUV8_BT601;
+ else
+ /* BT.601/BT.1358 16bit YCbCr422 */
+ vnmc |= VNMC_INF_YUV16;
+ vnmc |= VNMC_YCAL;
input_is_yuv = true;
break;
case MEDIA_BUS_FMT_UYVY8_2X8:
--
2.44.0
